gmrhodes13

We do try to steer people away from Esty and Ebay, some great armor can be found in our "vetted sellers" list in the "Getting Started" section. Some info in this thread about that maker Matt Gauthier (TE) a known recaster is the seller on that Esty post

A couple of approved anovos centurion apps

Here's Tony's build for comparison

Looks much better

Nothing better than BBB's, looking forward to seeing your progress, good luck

If you want to be absolute screen accurate the hole is normally a little closer to the end/top. Also the curve cut out is not so rounded, you can see flat areas that meet the curve. You also want to check the length of the strip as some armor makers make them longer then they need to be, should stop just short of the corner sections of the thigh

Congratulations trooper and welcome to the EI ranks, a well build kit, nicely done

Just having a quick look and there would need to be some adjustments made for Centurion. Front holes on both sides of the barrels are incorrect in details. Also hengstler counter would need to be moved further forward. By the looks of some of the pieces details it may be 3D printed as there seems to be lines on the end of the magazine and hengstler, any lines would need to be filled, sanded and painted

Congratulations and welcome to the Centurion ranks trooper

Nothing better than BBB's, looking forward to seeing the progress, good luck

Email info in the vetted sellers section is [email protected]

You don't have to use metal brackets although they are screen accurate, you can actually use snaps and elastic all around. If you do use them the bracket screws can split the plastic on the edges so adding some material behind them is a good idea for a little extra strength. Great tutorial from @ukswrath Standard system with no brackets and double snaps

https://www.whitearmor.net/forum/topic/3095-thigh-mods/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3117-bicep/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3048-howto-i-need-help/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2254-seperating-cod-and-tail/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3015-vocoder-painting/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2865-adjusted-sds-battle-spec-face-plate/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2764-my-stromtrooper-display/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2838-breath-guard/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2810-need-suggestions-on-separating-my-belt-assembly/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2766-holster-to-canvas-belt-attachment/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2660-helmet-padding/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2309-how-to-get-taller-lol/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2672-another-anh-bucket-paint-question/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/987-metal-clips-for-td/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/1930-painting-the-inside-of-the-bucket/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2052-fx-shoulder-bell-mod/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2085-correct-anh-belt-assembly/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2045-resin-blaster-paint-question/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/2053-tell-me-about-reshaping-the-fx-thighs/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/1250-question-about-assembling/#comments, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/1706-need-ap-helmet-pics-please/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/1494-paints/, restored by gmrhodes13 96

https://www.whitearmor.net/forum/topic/3139-romfx-vs-trik-toys-mini-amp/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3060-gluing-and-clamping/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3557-thermoelectric-cooling-moduels/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3339-yet-another-mr-ce-mod/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3499-hand-plate-placement/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3424-mr-ce-brow-trim/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3458-whats-your-experience-with-the-bend-over-mod/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/11-how-to-make-binders/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3267-need-a-little-electronics-expertise/, restored by gmrhodes13 93

When ever in doubt check the Gallery Section, as well as go through recently approved Centurion threads

Nice work on the strapping, it is a good idea on stress areas to use double snaps, shoulders are a good one to have a spare, I've lost two from those over the years. You may also find nylon a little restricting, if so change over to elastic as it has move give and you'll be able to bend and stretch more

You can use either method both are fine all the way up to Centurion, angled corners are more screen accurate though.

There is mention of WTF shin orientation in this build, further down the page Yes it's ok to have some edge showing on the shins

Came out great, nice work, just watch the angle of the belt buttons a couple look a little off

Just a small tweak. I'm not sure if you did it but it does help to stop your snaps popping off if you curve your belt, less strain when it is curved Clamp two pieces of wood between the belt spacing then gently push downwards

https://www.whitearmor.net/forum/topic/4458-first-piece-done/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/4319-a-question-about-the-thermal-detonator/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/4020-fx-thighs/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/4173-my-helmet-with-screws/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3700-paint-comparison/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3933-ce-overhaul-complete/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/4018-how-do-you-do-invisible-shims/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3962-tube-stripes/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3993-helmet-fan-set-up/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3688-first-kit-assembly/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/3742-mr-ce-helmet-mods-done/, restored by gmrhodes13 92

Congratulations and welcome to the EI ranks trooper, a few tweaks and hopefully we will see you at centurion soon

Always best to recheck the CRL's when building You may be able to still trim, just lay on top of the belt and check the width. Normally the trimmed corners are @ 10-12 mm

Check out @ukswrath build thread, his belt attachment is here: