Leaderboard

Thank you every one. Another year of service.

Worked on trimming the shins today. I measured 10mm in from each ridge enough for the 20mm cover strip... Fine tuned them to fit tight... Also tried them on with the boots and wrapped the backs and made a pencil line for where it will overlap. Divided that measurement and trimmed...

As Chris ran uncontested for the 2025 election cycle, he will remain as our Detachment leader for another term. Congratulations, Chris, we look forward to seeing what you have planned for the Det in 2025. As always, you have my full support, and that of a great team of staff ready to continue driving FISD on to new heights. Congratulations once again.

Greetings to all! I'm glad to finally share my little progress here. Initially, the goal was to make only a helmet, but now I'm thinking about creating a full armor. The choice of the helmet model was in favor of Vek3d, as it most closely matches the image in the movie. During the printing process, I saw a number of flaws that I decided to fix, and my friend helped me with this. - increased the detail and elaboration of cracks - made more removable parts - redesigned vocoder - added parts from the inner underside - the entire back of the helmet was completely redesigned, bringing it to the image of the Stormtrooper from Rogue one, I'm sure this part was taken from there. - redesigned the ears. Printer - Elegoo saturn 2 Resin - Elegoo ABS 2.0 and Resione M70

can't wait to see the final product in person

Congratulations:) Sent from my iPhone using Tapatalk

Congratulations!!!! Enviado desde mi iPhone utilizando Tapatalk

Congratulations! Bart

Congrats Chris

Congrats!

yes, there was a problem If anyone else has such a problem, just turn on the blaster > while it is still in standby mode, hold down the main button for a moment > navigate in the menu up to the barrel length > increase it with single clicks and that's it Thank You

Congratulations Chris! Well deserved!

Congratulations Chris. Looking forward to another great year

Congratulations, Chris!

Congratulations!!!

Congratulations!

Congratulations Chris

Congratulations!

Congratulations, Chris

Congratulations, Chris! Here's to another successful year!

Looks like you have a bit of print lift, slightly curved in the first photo. They do however have a small gap

If you look at the shape of the shins, as shown by the red lines, close you can see that it follows the natural leg shape too. It's just far more subtle.

Nice! You won't need to print the cod and butt plate, so save yourself some time and filament

And Hot Toys reference