Leaderboard

Hi Brian, I think they're ok according to the CRL and here you can see an original Boot to compare. The only issue I see is that the Shaft section to be a little wide and could be difficult to fit into the shins. jus take it in consideration. Boots Boots are above ankle height and made of white leather or leather-like material. Small U-shaped elastic sections on both sides of the ankle. Flat sole with a short heel. No buckles or laces. Jodhpur/ Chelsea-type boots or an equivalent style is acceptable. Elvis or Mariachi boots are not allowed. OPTIONAL Level two certification (if applicable): There is no seam present on the front of the boot. Boots have a black sole

Damn that Anovovirus! Sent from my iPhone using Tapatalk Pro

Cooked this up yesterday.

OK Troopers, it's time for our annual design contest for Celebration! For those of you who have a creative mind and mad design skills, it's time to step up to the plate and possibly have your original artwork used as the official logo by the FISD to commemorate the biggest SW convention in the world in Anaheim, CA. this year! We are starting this contest early (in case there are delays in shipping) as we want to get these in your hands in time for the big weekend in August! The winning entry will be made into a patch, which will be worn and traded by hundreds (and seen by thousands) at this event. It will also be available as a T-shirt to show off your FISD pride! So how do you enter? Glad you asked! Here is the low-down: 1. The contest will be open to all members. If you can see this post, you can enter! 2. The competition will begin on March 9th and will run until April 9th. After that, a poll will be opened so that everyone can vote on the design they like best. 3. The number of designs you can enter is only limited by your imagination. 4. You are welcome to use any FISD logos in your artwork. 5. Shapes can be round, chevron, or custom. 6. Design MUST include full Detachment name (1st Imperial Stormtrooper Detachment), 501st Legion, date (Aug. 2020), Anaheim and LFL. Exact dates (27-30) are optional. 7. All entries become property of the FISD/501st Legion. The winner will be announced in the April newsletter and will receive two free patches and other cool swag (to be announced) as well as some serious bragging rights! The finished products will have their own sales thread(s) once the designs are approved and ready to order.

I can across these boots at H&M clothing store here in Japan. Interested to know if these are good or not for all levels. They look fairly close but not quite sure. Thoughts?

Ah! I see that now as well. The drop boxes angled in somehow while I was running back and forth between the backdrop and my camera. I should have noticed it when I was uploading the images to my application. I’m always good about checking their alignment when I kit up. They really shouldn’t move. They’re on a loop the goes around the belt and once attached to my ab, the loop can’t move left or right due to the hardware which in turn keeps them where they should be. Either way, I’m glad to fix it even if it means gluing it down so that it doesn’t happen again. I’ll complete the changes to the drop boxes and my helmet after work this evening. I’ll have updated photographs posted in the morning for your review - to show the work is complete. Thank you sir for your feedback and for keeping me in check! Please standby.

here you can see how they are supposed to fit. cheers

I don't know if you can use them at all levels.. but that's the same boot that I got.. and painted.. but I am not approved yet.. Sendt fra min VOG-L29 med Tapatalk

I think you should be okay for basic but here are a few suggestions to help improve your overall look: The biggest thing is to make sure that your chest plate stays overlapping on your ab. This is a requirement for basic. When you submit your final photos, ensure that no gap is visible here and that even after moving around, your chest overlaps your ab. I agree with Mark above that your thigh ammo pack is riveted very close to the edge of the pack however I'm not sure what you can do about this without getting a new one. Making a hole and filling the old one will probably not be a good option because they would be very close together but it's something to watch for. Watch out for sniper knee lock. Wear your thighs as high as you can and consider adding some foam to help push out the left knee and avoiding it getting caught in the thigh. I would suggest reinforcing this area as well to prevent cracking. In your action photo, it looks like you have some strapping sticking out of your thigh, so make sure your connections are all secure. In the same photo, your left bicep looks like it's rotating. If you don't have strapping between shoulder bells and biceps, it's a good idea to help keep your look more consistent. Your shoulder straps look like they may not be quite touching your back plate, so you may want to curve them a little more with a hot water bath and/or adding the optional elastic straps to help hold them down. Mostly minor stuff! You'll be trooping in no time!

Mark's right. The heat created by drilling out the rivet will melt the plastic if not done slowly and leave a hole the size of the rivet head. I prefer to use a large drill bit and drill into the rivet head in stages, meaning drill for a short while then let the rivet cool, then repeat until the head comes off. You don't want to drill right through the rivet - just take the head off and the rivet will come out the other side.

isnt that rivet on the thigh ammo too much on the corner edge?

Small bit, slow and steady. If they don’t feel confident they won’t do it. Sent from my iPhone using Tapatalk

Great work on the holster install

Awesome, I'd buy it

Thigh resizing has been done and this is how it looks this is a size compassion between the size of my thighs. Resized: Before: Sent from my iPhone using Tapatalk

Bending "gods" lol

Is he blowing off the blaster to look cool or is he trying to eat it?

A quick suggestion is about your Ab to kidney rivets, they should be painted white the same for the thigh ammo pack rivets cheers

I LOVE the fact that Dan has latched onto this subject and has such a passion for it! (Makes life as a DO much easier)!! You 'da MAN, Dan!

Hehe. I’m the guy that posted this... ;-) The middle brow looks more accurate for thickness. Frown looks better on the right. Although, it’s original trilogy all the way for me. ;-) lol

I’m a personal trainer and Brazilian jiu-jitsu instructor so if anyone what’s any advice on ways to train or eat I’m more than happy to try and help. Sent from my iPhone using Tapatalk

I weighed 198 when I built and completed my ROTJ TK. On 2/1, I tried on the costume and it would not fit. I weighed 220 and so I am in process of losing those twenty pounds. I have started tennis again, cut out sugar (sodas) and cut my main meal to one a day. I am hoping to fit into the armor by this Saturday and I will update with my current weight then. Thanks and I hope to get back on track.

I'll get those photos soon. In my original side photos my arms were covering the backplate

I have a BFA in Technical Theater from UNSCA. One of the studies as part of the degree is props. I used to be in backstage theater. Now a pastor. So now I use it all for fun and enjoyment! (and the occasional sermon illustration!)

Whilst the CRL images are a loose guide, your best reference material is screen shots of real troopers; https://www.whitearmor.net/forum/gallery/ As below, ideally the two parts will sit nicely together with no overlap; If you have pictures of where you’re at, we’ll do what we can to get you looking spot on. :-)

I finally had a chance to get together with my squadmate Scott who also ordered Jim's FOTK. We are super exited to be working on them together! After 2 hours of sanding inside the pieces with 220 grit sandpaper we were impressed by the amount of progress we made! Nearly all the pieces were sanded, just a few more left! I also ordered a FOTK Squad Leader Pauldron from IG - hoping it shows up soon. Sent from my Pixel 3 using Tapatalk

Hi Philip, Great to view your Centurion Application. I would suggest you to add your EIB application Link and a close photo of your ab buttons armor section that I'm sure the D.O. team will surely ask you for. Good luck with your approval !!

Awesome - can't wait to see what people come up with

Big weekend for progress on the kit - took several steps forward (and a few back), but it's coming along! The big step was finally adding additional resin to the backsides of all the armor. This kit is my first time working with fiberglass or resin, so it was a learning experience forsure. After prepping the inside of the panels by scuffing with 100grit sandpaper, as previously mentioned, I went with FibreGlast 1110 vinylester resin, which is catalyzed by a mix of 1.25% MEKP. I bought a quart of the stuff along with their basic mixing kit that included several gloves, measuring and mixing cups, and stir sticks, and I ordered several extra cheap chip brushes. I did a test run to ensure that the resin would bond to the existing fiberglass matting/resin and would remain flexible, while adding strength (it did, though I must not have added enough MEKP or mixed properly, as it took a looooong time to fully harden). For the first full batch, I used a syringe I had laying around (for refilling fountain pens, not anything nefarious haha) to precisely measure out the proper amount of MEKP and mixed it into 300ml of resin, then stirred (trying not to mix in bubbles), and transferred to another cup to work out of. It turns from a light pink to a light brown when properly mixed, I learned. You can also use what resin is left in your cup as a gauge for how cured the rest of the resin is. Using the chip brushes, I applied a thin layer of resin to all of the inside armor surfaces (except the arms... I'll do a final 100ml batch for those and any other pieces later). I definitely mixed up too much the first time - 200ml is all I could probably use before it started setting up and became the consistency of like Jell-O instead of maple syrup like it was. I ended up tossing about 100ml of hardened resin in the cup, but live and learn. I mixed up another 100ml and used that to do a second coat on higher-stress areas like the shoulder tabs, chest armor neck line, and posterior armor. If it isn't obvious already, wear gloves, cheap clothes you don't mind ruining, and for god's sake, PPE in the form of a ventilator. I already have lymphoma, I don't need lung cancer too. While I was at it, I did a little repair on one of the belt boxes - it had a super thin spot in the wall that had already cracked, so I mixed up more of that flexible bumper filler and added some in to ensure it was strong, then a little more resin. The whole adding resin adventure turned out supersuper well over all and I would definitely recommend what I did to others. It helped add strength to all of the panels as well as "sealing" the open fibers that were super itchy and rough, but maintained a firm flex. You can see the smoother, glossier finish on the below shot. Next up, I sprayed all the insides of the panels with a flat white for good measure. (Ended up waiting on the thighs, as I wanted to split them and add a little more resin before painting the inside. Also, I just so happened to run out of the rattle can I was using after spraying everything else). I split the back of the thighs later in the day using my Dremel cut off wheel, then a 60grit sanding block to smooth my cut lines out. I'm a slimmer guy, so it'll be nice to overlap these and size em down a bit. I'll add a little extra resin where I chopped them when I coat the arms. After cleaning up any stray resin droplets (what I get for not masking anything) on the front sides of the armor, I sprayed several panels with flat white primer as well. I also sprayed the helmet after giving it a quick wet sand with 400grit and allowing it to dry fully. I'm going to have my pro paint guy paint it for me, but I figured it wouldn't hurt - and it came out surprisingly smooth. Aaaaaand here's several of the main panels, with both sides successfully in flat white 2X primer. I'm pretty darn pleased with how things are going so far, but there's lots more work to be done! Next up is more wet sanding, then a couple final coats of high gloss white! Doing my final chemotherapy infusion this Friday the 13th, so likely no progress until the weekend after, but we'll see how I'm feeling!

They are definitely the go to holster, nice work

THIGHS Moving on to the thighs, I tackled the side with the holster first. I had Dan's metal holster, and it is a beauty. I wouldn't even save the kit holster as a paperweight. First thing I did was to drill a hole somewhere in the middle so I could embed a bolt through it, which, combined later with the top and bottom screws of the holster, will go through the resin riser, ABS riser, and the thigh piece, holding everything securely together since this part is going to hold the weight of my blaster in the future. This is how everything should look like once done, with 3 screws going through the entire set up. Here you can also see the rectangular hole that I cut out, so that the indent where the clasp greeblie will sit later can sit flush. I glued the holster together, even though it would be secured by 9 screws in the end, simply because I am going to send it for painting WITHOUT the screws. The screws will go in at the end, so they will retain the silver colour and not be painted white if I had sent it in with the screws. This is the completed set up, with the edges of the resin riser sanded flush with the metal holster. Next, I glued the ABS riser to the thigh, and used 3 temporary bolts to hold them together while it dried. Then, slather with epoxy putty because, again, CRL says seamless... After sanding, priming, sanding, I was happy with the riser looking seamless, and glued the holster to it. Again, I used temporary screws to hold it all in place. This is after it has dried and I had removed the screws. Finally, the 2 halves of the thigh was glued together. Pretty straightforward using clamps, magnets and clips. I glued both sides down as the thighs allowed my legs to go through without any problems. The clasp greeblie was then heated, curved to shape, and glued onto the thigh. After priming, sanding, and wet sanding using 1500 grit, it is done. The other side was simply glueing the 2 halves together, and adding the clasp greeblie. Here the 2 thighs are done and ready for painting.

FOREARMS So after completing the re-work of the recess at the front of the forearms, it was time to assemble it together. I did not want to use the shim method, as I realised that if I used the shim down the whole length of the forearm, the pieces would open "outwards". I needed the pieces to fold "inwards" in a rounded fashion. As such, I decided to use little styrene rectangles, heated and bent inwards and lined them along the insides. This is how it looks like completed. The 2 sides do take on a nice inward curving shape. As for the top plate, since I am going for Centurion, the CRL states that the "Forearm top plate is not attached at front of wrists". So I glued 2/3 of the top plate, leaving the front end flexible. Next, the arduous task of filling the seams and sanding them down to a smooth finish. Once that was done, I glued the 2 clasp greeblies and the ridged rail, and tackled the wrist boxes. Again, the CRL states that "Forearm wrist box should be separate pieces, affixed to forearms". So I decided to use 2 nylon bolts and nuts, drill 2 holes on the forearm, and attach the wrist box to the forearm this way. It shows a clear separation. From the inside, this is how it looks: The completed forearm, ready for priming and sanding down one final time. After priming, sanding, priming again, and finally wet sanding with 1500 grit, left to dry. And the completed forearms, ready to send for auto paint.

Thanks man, I love that the whole kit is basically assembled. Our squad is a tight group - we just hit 29 members! Our life day celebration (Squad Holiday Party) was a great success. Sanded a few pieces by hand this weekend. Before and after pics are attached. Before Sanding After Sanding Has anyone tried using a mouse sander to speed up the process? I think you would have to be careful and use a low setting. Might be helpful on some of the larger pieces. Not sure it's worth the risk but can't hurt to ask if it's been done before. My friend in the squad ordered Jim's TLJ kit which should be shipping this week if all goes well. I'm excited for him to get it so we can work together! Sent from my Pixel 3 using Tapatalk

Have you seen the original helmets since replica ears were added and also the new paint discovery?

Welcome to the FISD! Below, in the next 3 posts, you will find the lists of our Imperial Attachés. These are respected folks who have gone above and beyond the call of duty, and have been selected to welcome you to the world of shiny white armor! They are volunteers whose duties (in part) are to assist you on a local level to achieve your goal of joining the 501st Legion as Imperial Stormtroopers. Not all Garrisons, Squads, or Outposts may have them, in which case you should refer to the one that is closest. If you wish to contact your local Attaché regarding local events, activities, etc., you can PM (personal message) them here by simply clicking on their highlighted screen name, (example: @justjoseph63) Please note that again, these are volunteers, and may not be able to get back to you immediately, but if you have trouble getting in touch with someone, please feel free to contact @Nairy via PM. If you are a 501st approved Trooper who wishes to join the ranks of the Attachés, please get in touch with @Nairy and/or visit http://www.whitearmor.net/forum/topic/15252-fisd-attaché-program/ Each Garrison is shown in ORANGE. Click on it for a direct link to their site. Post 1: United States Post 2: International Garrisons Post 3: Outposts (work in progress) An asterisk ** next to the Area Served means that the Attaché is verified active as of 2026. An asterisk ** next to the Area Served means that the Attaché is verified active as of 2024. An asterisk ** next to the Area Served means that the Attaché is verified active as of 2023. An asterisk ** next to the Area Served means that the Attaché is verified active as of 3/1/19. An asterisk ** next to the Area Served means that the Attaché is verified active as of 6/01/18. Thanks, and again, welcome to the home base of "Troopers helping Troopers"! Location Garrison/Squad Attaché Attaché contact Area served/Armor/Offices held ALABAMA Alabama Garrison Chris @bmth chris Montgomery ANH-S ** Delta Squad Needed -------- ------ ALASKA Alaskan Garrison Needed -------- ------ ARIZONA Dune Sea Garrison Eric @GoofTrooper Phoenix, AZ ANH-S ** ** ** Jundland Wastes Squad Scott @Hesikaya ANH-S ** ** ARKANSAS Diamond Garrison Bryan @Kagamaru Fort Smith, NWA ANH-H ** ** CALIFORNIA Southern California Garrison Orange County Squad Jeff @Oztrooper Orange County, CA ANH-S/ESB, Armorer ** ** ** Justin @TheRascalKing Orange County, CA ANH-S/ANH-H/ESB/HWT/RO/TFA, Armorer, Former DPRO ** ** ** ** Los Angeles Squad Michael @TK6682 Northwest Los Angeles County, CA ANH-S/ESB/TFA/Concept ** ** Ardeshir @equuspolo San Fernando Valley, CA ANH-S/ANH-H/ESB/HWT/TFA/TLJ/TLJ-E ** ** ** Inland Empire Squad Eriberto @TK Cowboy Nuevo, Riverside County, CA ANH-S, Squad Leader ** San Joaquin Squad Adam @Atom661 Bakersfield, CA ANH-S ** ** ** Channel Islands Squad Brian @mikidymac Ventura to Paso Robles, CA ANH-S ** Central CA. Garrison David @tat2trooper Sacramento, CA ANH-S ** ** South Valley Squad Rebecca @sharkbait Fresno, CA ESB ** Northern Mustafar Squad Needed -------- ------ Imperial Graffiti Squad Needed -------- ------ Imperial Sands Garrison Needed -------- San Diego, CA Golden Gate Garrison Tony @ukswrath ANH-S/TFA/HWT, Former DXO, Armorer, FISD Diplomat ** ** ** East Bay Squad Needed -------- ------ North Bay Squad Craig @Batlord77 ANH-S/TFA ** Peninsula Squad Sha Sha @shashachu San Francisco ANH-S, Asst. Squad Leader, Former DO ** ** ** ** South Bay Squad Needed -------- ------ COLORADO Mountain Garrison Needed -------- ------ CONNECTICUT Connecticut Garrison Needed -------- ------ DELAWARE First State Garrison Needed -------- ------ FLORIDA Florida Garrison Tampa Bay Squad Ken @PiettLives Tampa Bay ANH-S, Trooper Academy CO ** ** ** ** Chuck @TK 33773 Tampa Bay ANH-S ** ** Everglades Squad Tarkan @TookBreaker South Florida ANH-S/ESB ** Makaze Squad Mike @msouza Windermere (Orlando) ANH-S ** ** ** ** Parjai Squad Needed -------- ------ Squad 7 Doug @DUGJAX ANH-S, GML ** ** Honorary Attaché Joseph @justjoseph63 Live Oak ANH-S/ANH-H/HWT, Former Attaché Ambassador, DO, XO. DL ** GEORGIA Georgia Garrison Ocmulgee Squad Needed -------- ------ Outlanders Squad Needed -------- ------ Venator Squad Jorge @zv288bot North West Atlanta ANH-S ** ** ** ** Caleb @MaskedVengeance Far Northwest Georgia ANH-S, Former Attaché Ambassador, Current DCoG ** ** ** Coastal Empire Squad Needed -------- ------ Terminus Squad Chris @PhoenixTrooper Atlanta Area ANH-S/TFA/DTH, Armorer ** ** ** Nemesis Squad Christine @Cricket Atlanta Area ANH-S, GML, Squad Leader ** ** ** ** HAWAII Pacific Outpost Needed -------- ------ ILLINOIS Midwest Garrison Dan @KaiserintheHood ANH-S/HWT ** ** INDIANA Bloodfin Garrison Needed -------- ------ Dathomir Squad Northern Darkness Garrison Mark @captsafe66 ANH-S/HWT/TFA/TLJ-E, Former GCO, Current GML, DCoG ** ** IOWA Central Garrison Needed -------- ------ Imperial 80th Squad Ben @Buttons Omaha, NE ANH-S ** ** ** KANSAS 70th Explorers Garrison Needed -------- ------ Firehawk Squad Needed -------- ------ Gateway Squad Needed -------- ------ Great Plains Squad Needed -------- ------ KENTUCKY Bluegrass Garrison Needed -------- ------ Blue Sun Squad Needed -------- ------ Derby City Squad Darin @Darin Ennis Louisville KY ANH-S ** ** Northern Vanguard Squad Needed -------- ------ LOUISIANA Bast Alpha Garrison Shane @Shanester New Orleans ANH-S, XO ** ** MAINE New England Garrison Needed -------- See @DocDan Central Vermont TFA ** ** ** MARYLAND Old Line Garrison Alex @Alikh D.C. / Baltimore ANH-S ** ** ** MASSACHUSETTS New England Garrison Needed -------- See @magni Providence, RI, and Mass. ANH-S/HWT/TKC ** ** ** MICHIGAN Great Lakes Garrison Needed -------- ------ MINNESOTA Central Garrison Needed -------- ------ MISSISSIPPI Rancor Raiders Garrison Needed -------- ------ MISSOURI 70th Explorer's Garrison Needed -------- ------ Garrison 66 Needed -------- ------ MONTANA Timberline Garrison Needed -------- ------ NEBRASKA Central Garrison Needed -------- ------ Imperial 80th Squad Ben @Buttons Omaha, NE ANH-S ** ** ** NEVADA Neon City Garrison Brien @Harbinger Reno, NV ANH-S ** ** ** ** Matt @thechosenhitman Las Vegas, NV ESB ** ** ** ** NEW HAMPSHIRE New England Garrison Needed -------- See @magni Providence, RI, and Mass. ANH-S/HWT/TKC ** ** ** NEW JERSEY N.E. Remnant Garrison Anthony @Redforce Northern New Jersey ANH-S ** ** Eric @Hoda ANH-S/ANH-H/ESB, DPRO ** NEW MEXICO Dewback Ridge Garrison Brandon @elwessbrandon Albuquerque ROTJ ** ** NEW YORK Empire City Garrison Allan @allan1313 East L.I., Queens, Brooklyn, Manhattan ANH-S/ESB/HWT ** ** Steve @starsaber25 East Long Island ANH-S/ANH-H/ESB, GML, DCoG ** ** ** ** Bill @Cybergrunt Central Long Island ANH-S/HWT, GG, MBO ** ** ** John @JBar NYC ANH-S ** ** Hudson Valley Squad Erick @echo327 Hudson Valley ANH-S ** ** Garrison Excelsior Needed -------- ------ Nickel City Squad Needed -------- ------ NORTH CAROLINA Carolina Garrison Shawn @CrookKnight Charleston NC area HWT, Armor & Pack Expert ** ** Crimson Sky Squad Needed -------- ------ Palmetto Guardian Squad Needed -------- ------ Western Overwatch Squad Needed -------- ------ NORTH DAKOTA Central Garrison Needed -------- ------ Imperial 80th Squad Needed -------- ------ OHIO Ohio Garrison Jeff @StrmTRPR85 Columbus, OH ANH-S ** OKLAHOMA Oklahoma Garrison Rachel @Spadille Central Oklahoma ANH-S ** ** OREGON Cloud City Garrison Needed -------- ------ PENNSYLVANIA Garrison Carida Needed -------- ------ StarKiller Garrison Needed -------- ------ PUERTO RICO Puerto Rico Garrison Christian @v7sg San Juan, PR ANH-S/ESB/TFA, GCO ** ** ** ** RHODE ISLAND New England Garrison Randy @magni Providence, RI, and Mass. ANH-S/HWT/TKC ** ** ** SOUTH CAROLINA Carolina Garrison Needed -------- ------ Crimson Sky Squad Needed -------- ------ Palmetto Guardian Squad Needed -------- ------ Western Overwatch Squad Needed -------- ------ SOUTH DAKOTA Central Garrison Needed -------- ------ TENNESSEE Midsouth Garrison Knox Eisley Squad Brian @Tilheyra Knoxville TKS ** ** Mos Nooga Squad Needed -------- See @MaskedVengeance Chattanooga, TN area ANH-S, Former Attaché Ambassador, Current DCoG ** ** Music City Squad Needed -------- ------ Twin Sun Squad Terry @dblcross Memphis ANH-S ** ** TEXAS Star Garrison South Texas Squad Helen @mamaking ANH-S ** ** North Texas Squad Needed -------- ------ West Texas Squad Needed -------- ------ Central Texas Squad Needed -------- ------ Texas Gulf Coast Squad Jose @TK 71627 Edinburg ANH-S, Recruit Liaison ** ** Imperial Rough Rider Squad Needed -------- ------ Desert Inferno Squad Needed -------- ------ UTAH Alpine Garrison Ben @Neb Sgird Provo/Salt Lake City area ANH-S/HWT, Extended PR/GML Team ** Kyle @FN1313 Salt Lake City ANH-S ** ** ** ** VERMONT New England Garrison Green Mountain Squad Daniel @DocDan Central Vermont TFA ** ** ** VIRGINIA Garrison Tyranus Galactic Central Squad James @jsilvius Richmond ANH-S, DMBO, GXO ** ** ** Inferno Squad Needed -------- ------ Serenno Squad Needed -------- ------ Sienar Fleet Squad Needed -------- ------ WASHINGTON Cloud City Garrison D'Angelo @DStep Vancouver, WA ANH-S ** ** Garrison Titan Paul @Daetrin Seattle, WA ANH-S/ANH-H/ESB, FISD Founder ** WASHINGTON D.C. Old Line Garrison Alex @Alikh D.C. / Baltimore ANH-S ** ** ** WEST VIRGINIA Garrison Corellia Needed -------- ------ WISCONSIN Wisconsin Garrison Caleb @dejango Green Bay ANH-S ** WYOMING Mountain Garrison Needed -------- ------

Location Garrison/Squad Attaché Attaché contact Area served/Armor/Offices held ARGENTINA Garrison Argentina Needed ------ ------ Squad Rosario Needed ------ ------ Rio de la Plata Squad Needed ------ ------ Dark Side Warriors Squad Needed ------ ------ AUSTRALIA Desert Scorpion Garrison Glen (Q) @gmrhodes13 Perth, Western Australia ANH-S/ANH-H/ESB/HWT/TFA, TLJ/TLJ-E/TFU/TKC/DTH, D.S.G GML, GWL, GWM, GEC Expert Armorer ** ** ** Knightfall Garrison Rudi @tarok Melbourne ANH-S GXO, LMO ** ** ** Chris @Slouch Melbourne ANH-S, GEC ** ** Redback Garrison Andrew @Sly11 Brisbane ANH-S, Former FISD DL, XO, GCR, Armour/Blaster Builder ** ** ** ** Longfin Squad Needed ------ ------ Razorbacks Squad Needed ------ ------ Venom Squad Needed ------ ------ Southern Cross Garrison Matthew @Mworm1974 Sydney ANH-H, Armorer ** ** ** ** Hunter Hornet Squad Needed ------ ------ Black Tower Squad Needed ------ ------ Southern Dewback Garrison Needed ------ ------ Thylacine Outpost Troy @TK20187 Hobart, Tasmania ANH-S ** AUSTRIA Austrian Garrison Needed ------ ------ Upper Austria Squad Needed ------ ------ BELGIUM Belgian Garrison Flanders Dragon Squad Ilan @TK-40996 Arendonk ANH-S ** ** Tornacum Squad Needed ------ ------ FanWars Garrison Manu @berodrim Hannut ANH-S ** BRAZIL Brazilian Division Garrison Kuat Drive Yards Squad Needed ------ ------ Death Valley Squad Needed ------ ------ Death Star Garrison Needed ------ ------ Imperial Coastline Garrison Needed ------ ------ Novo Império Garrison Needed ------ ------ Centro-Norte Squad Needed ------ ------ Squad Nordeste Needed ------ ------ CANADA Atlantic Garrison Needed ------ ------ Badlands Garrison Aaron @Pyrates Alberta, Saskatchewan, Manitoba, B.C ANH-H/TFA, Blaster Construction & Armour Maintenance / Repair & Liberation of Candy, GML ** Renegade Squad Needed ------ ------ Crimson Aurora Squad Needed ------ ------ Canadian Garrison Brad @68Brick Hamilton or Toronto ANH-S ** ** ** ** Robert @Twosolitudes ANH-S ** ** Gerald @Doggydoc Kitchener, Southern Ontario ANH-S, DO ** ** ** Vindicator Squad Needed ------ ------ Capital City Garrison Mark @sylverbard Ottawa ANH-S, Anovos Expert (Alpha75) ** ** ** Forteresse Imperiale Garrison Needed ------ ------ Outer Rim Garrison Chris @R2Chris Vancouver, BC area ANH-S ** ** Ravinak Squad Needed ------ ------ CHINA Chinese Garrison Needed ------ ------ COLOMBIA Colombia Garrison Mario @IRoS Bogotá TKC, GML** ** Zabrak Squad Needed ------ ------ Pacific Thunder Squad Needed ------ ------ Mudhorn Squad Needed ------ ------ COSTA RICA Costa Rica Garrison Mario @TKSpartan San José/Liberia ANH-S Chief Deployment Officer ** ** ** ** CZECH REPUBLIC Czech Garrison Needed ------ ------ DENMARK Danish Garrison Needed ------ ------ ECUADOR Ecuador Garrison Needed ------ ------ Guayaquil Imperial Squad Needed ------ ------ 2112 Squad Needed ------ ------ FINLAND Finnish Garrison Tommi @TK-20507 ANH-S ** FRANCE French Garrison Jean Louis @JEAN LOUIS Coubron, Paris area RO ** GERMANY German Garrison Arma Candida Squad Needed ------ ------ Coastal Hammer Squad Christian @Novak Dimon Wilhelmshaven ANH-S, Armor/E-11 expert ** ** ** Luca @Morgi Kiel ANH-S/ESB, DPRO ** ** ** Torben @Tall_Trooper Göttingen ANH-S, FISD IPM ** ** Custodes Euroi Squad Christoph @Ripper_L Nuremberg ANH-S/ESB. Editor at Large, FISD Diplomat ** ** ** ** Echo Nova Squad Needed ------ ------ White Shadows Squad Tino @T-Jay Cologne/Dusseldorf ANH-S, E-11 Expert ** ** ** ** Freddy @Freduster Düsseldorf ANH-S, Armor Expert & E-11 Expert ** ** ** HONG KONG Hong Kong Garrison Needed ------ ------ HUNGARY Hungarian Garrison Chimaera Squad Needed ------ ------ Pannon Squad Needed ------ ------ ICELAND Icelandic Garrison Needed ------ ------ INDONESIA Garuda Garrison Indonesia Wibowo @swibowoj Jakarta ANH-S, former GWL/GCO ** ** ** ** Adi @Bazz Jakarta City ANH-S/TFA ** ** ** IRELAND Ireland Garrison Needed ----- ------ ITALY Italica Garrison SubZero Squad Needed ------ ------ 77th Alpi Squad Davide @lorddavids Genova ANH-S, Armor Expert ** ** 3T Squad Needed ------ ------ Sqvad Praetoriana Needed ------ ------ Trinacria Squad Needed ------ ------ JAPAN Japanese Garrison Brian @Bulldog44 Tokyo ANH-S/TFA, Former GXO, Blaster Expert ** ** ** ** Asa @SgtGarand Okinawa ANH-S ** ** Robert @husky68 Tokyo ANH-S ** Arthur @giskard8 Tokyo ANH-H/ANH-S/ESB/TKC/TKS, Former Hong Kong XO, GCR, DCoG ** ** ** ** MALAYSIA Malaysia Garrison Needed ------ ------ MEXICO Bravo Garrison Needed ------ ------ Mayan Garrison Needed ------ ------ Mexican Garrison Imperial City Squad Needed ------ ------ Crimson Squad Needed ------ ------ Baja Squad Needed ------ ------ Wampatrol Squad Needed ------ ------ Rancor Hunters Garrison Needed ------ ------ Inquisitor's Squad Needed ------ ------ Centauros Squad Needed ------ ------ Skull Garrison Bantha Riders Squad Needed ------ ------ Green Bellies Squad Needed ------ ------ NETHERLANDS Dutch Garrison Daphne @AthenaIII Middelburg TKC ** ** ** NEW ZEALAND Outpost 42 New Zealand Garrison Georgia @Georgia Haywood Auckland ANH-S, GWL ** NORTHERN IRELAND Causeway Garrison Needed ------ ------ NORWAY Norwegian Garrison Even @Bobafett75 Oslo ANH-S ** PERU Garrison Peru Needed ------ ------- PHILIPPINES Philippine Garrison Dennis @NINJAM0VE Manila ANH-S/ANH-H/ESB/TKS, GML Expert Builder, Blaster Builder, Paint/weathering works ** ** ** Cebu Scarif Garrison Needed ------ ------ POLAND Polish Garrison Pomeranian Squad Needed ------ ------ Polonia Minor Squad Needed ------ ------ Greater Poland Squad Needed ------ ------ SINGAPORE Singapore Garrison Needed ------ ------ SPAIN Spanish Garrison Balear Squad Carolina @tigresa Mallorca ROTJ, Expert Assemble, Repair, Squad Leader ** ** Canarias Squad Jason @TK27022 Canary Islands ESB ** ** Castilla y León Squad Chemi @Chemi Valladolid ANH-S, GML, Deployment Officer ** ** ** ** Escuadrón Sur Needed ------ ------ Galicia Squad Needed ------ ------ Imperial Capital Squad Needed ------ ------ North Wall Squad Needed ------ ------ Squad Cierzo Needed ------ ------ Tercio De Levante Needed ------ ------ SWEDEN Swedish Garrison Trinity Squad Jonatan @Nairy Stockholm ANH-S/ANH-H, Former DPRO, Current Attaché Ambassador, GML/GXO ** ** ** SWITZERLAND Swiss Garrison Needed ------ ------ TAIWAN Taiwan Garrison Needed ------ ------ Takau Squad Needed ------ ------ THAILAND Thailand Garrison Needed ------ ------ UNITED KINGDOM UK Garrison Chris @themaninthesuitcase London (St. Albans) ANH-S, DXO ** ** ** ** Marc @Troopacoola Manchester ANH-S, Armourer ** ** Imperial Welsh Squad Needed ------ ------ Imperial Scottish Garrison Paul @Sithping Glasgow ANH-S ** **