TKSpartan

All of us were in your feet one day. Take your time, one tip, what I did was to watch, once and again, some video tutorials on YouTube. That helped me to have and idea of how to do things. When you have started and have a doubt, stop, review, ask before any cut, you will do it mate!!

Hi Steven, Most of the screen seen Stormtroopers had this section of the shoulder bridge removed, so we strongly suggest to trim off or half that section for higher levels. As Arthur mentioned before, also "That depends on how "far" the piece reaches down the back plate", the ends of the bridges should ride much higher above the O II plate below them. Reference images Note that we are talking only in the back section. To the front , the tab is totally accurate . Hope this can help you.

Congratulations Trooper, Welcome back !!!

looking great Jonathan, easy pass

Great News Sam, congratulations !! looking forward for your advances . Remember "Measure twice or more, cut and glue just once" post tons of photos ,we are here to help.

Hi Tina, I will be making your review . You have made a great work with the EIB fixed requested and your armor looks awesome, only a few quick fixes are needed before we can add the Centurion Badge under your name: Looking closely to your helmet's vocoder , it looks like there are like "pencil marks" around the top bumps , we are requesting to clean up this area . Personally I would suggest to take the next step for a better look and reshape a little the vocoder’s details. but this is only a suggestion. References Next we have the Ab buttons panel , the large one needs to be trimmed a little . The sides should not extend over the raised ridges, but should sit inside them and have no rounded corners. Also we need you to clean up a little the buttons paint so it doesn't extend beyond the raised edges. CRL: Ab button paint shall not extend beyond the bottom of the actual raised button Reference You have a shiny white armor, but the guards are way too weathered. The painting session will need to include a new coat of white paint for them References Finally. You may also want to glue some scraps of ABS behind the gaps in the back lower ridges of the thighs or fill them with ABS paste. References We are confident that you can address the requested fixes. Your Centurion Badge is waiting for you Tina.

Hi Jim. Thank you for your Centurion App. One of us will be with you shortly. Added to the processing line.

Hi Ken, Thank you for your EIB app. I have added it to the processing line. One of us will be with you shortly. Meanwhile, could you please add the following photos? 1. Close photo of your sniper knee both sides and front Crl: Sniper knee plate must be aligned with the ridges on the shin. Sniper knee plate must not have visible rivets or fasteners attaching it to the shin. 2. Close photo of your thigh ammo belt both sides outside and both sides inside to see the rivet type. Crl: Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). Thanks

looking good and congrats for weight loss

Congratulations Trooper!!

The armor army man !!! Great Work Ardeshir.

Hi Robert, Mine is a RWA creations armor, and let me say that I'm very pleased with it. Ross has a great customer service and comunication. He has also several and so practical you tube tutorial videos

Looking great!!

Hi Yakob. Impresive, most impresive. You are going so fast with the fixes, yes ! that's the attitude Trooper!! When you're ready with your belt, please post a photo wearing the armor to check the butt and belt section. Thanks

Congratulations trooper, welcome to the ranks !!!

Hi Trina, thank you for your Centurion App. One of us will be with you shortly. Added to the proccesing line.

Hi Cory, welcome to FISD. A good resource for build your armor is to take a look to other's building threads and post a lot of photos here. We are here to help.

Looking Great Trooper, easy pass!!

Hi Brett, It looks like required photos were submitted. Joseph will be with you shortly . Good Luck

Congratulations Trooper !! Welcome to EIB .

Great work ! Looks just right. remember to place the Ab section rivets first , (those you have marked) and then align the kidney rivets. Almost there !

Welcome to FISD DJ ! Let's know how we can help.

Welcome back Mike

Troopers!! please welcome to the ranks Centurion # 493- KC Grim TK 57899 of the Southern California Garrison . Congratulations! Just 7 to go !!

Hi KC , and thank you for your Centurion application! CRL and Centurion Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of CENTURION. Congratulations! You did a great wok with the requested fixes, well done !! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. This is a very common issue, your butt plate appears to be pushed back and overlapping the kidney plate letting a gap between the but plate and thighs. Reference Images A suggested solution is to add a couple os plastic pieces , as you can see bellow. it works great. Another just dressing detail to consider every time you put on your armor and is a black strap section that is showing up at your right side. We noticed that your thighs are riding a bit high and this could make you have some "armor bite" or difficulties when walking. You can check your straps and lower then a bit when dressing. Reference Images And that's all Trooper!! Welcome to Centurion 500 !!