gmrhodes13

Not that hard just fall over into a muddy puddle

A long block of wood with sandpaper wrapped around can help to sand areas straight. Here's how I trim mine Clamp a metal rule on the piece Mark, trim Sand if needed Done

Good idea, no issues with those for basic approval

Nice work, always amazing to see another take on adding lenses

Very nice work

Some great references in that book, you will enjoy

If you paint a thin coat of white around the edges it will fill in any bleed areas and stop the black bleeding through.

Looking forward to seeing the progress, a bit of info you may find useful. Gallery section is here for ESB, you may want to also check out the ANH gallery as all the armor would be similar

It's worth a try, it's the only thing that would work on one pair of handguards I tried to glue, nothing else would work.

I have similar issues with a Beagle, have to double check his mouth when ever he leaves the print area

Feedback given on this thread

You do have a makers mark pressed into the boot at the rear, this may be a problem if your GML (garrison membership liaison) picks it up as there should be no markings. Here's some references And gallery is here

I've added your images to the post, you may receive more feedback It is very difficult to take images of yourself as stretching can make pieces shift. Good to see you had someone else take some photos. Looks like your kidney is too low on the sides, should meet with the top of the ab on the sides, this could be because your backplate is pushing it downwards, you may want to see if you can bring the backplate up at your neck/shoulders, if not you may have to reduce the height of your backplate. Thighs are too long, they are overlapping the butt plate, you may have to do a little trimming there, height can be an issue with some armor fitment, here are a few great threads for building to a smaller height https://www.whitearmor.net/forum/topic/38416-crickets-rs-stunt-build-for-the-vertically-challenged/ https://www.whitearmor.net/forum/topic/38842-fragarocks-rs-stunt-build-not-to-scale/ https://www.whitearmor.net/forum/topic/42868-sha-shas-wtf-anh-stunt-build-complete/ You can also see your armor at the elbows are touching. Left rear shin does not look closed, shoulder straps sticking up, may need a hot water bath to bend them down, thighs touching

Here's some great tips on taking photos

Nice work, you could add a few of the finer details to really set it off

Congratulations and welcome to the ranks, before you can apply for EIB you will need TK access upgrade which you can request here

Still under review I believe, it can take some time when deployment offers are conferring, checking references and communicating with one and another because of different time zones and of course real life can get in the way, I'm sure one of them will be along soon

Good luck, hope you hear something soon

Not that I'm aware but someone may have, it could work but it may also give more gap between them and the chest/backplate as they would be wider but loose thickness. you will find some armor have larger bells to others, RS are quite large compared to say ATA, RS and others

https://www.whitearmor.net/forum/topic/45287-question-about-attaching-belt-face-to-canvas-belt/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/45242-problem-with-thermal-detonator-clips/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/45229-question-about-kidney-plate-connection/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/44452-how-far-can-front-ab-overlap/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/40584-ear-piece-on-ata-helmet-mis-aligned/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/44031-cover-strips-corners-question/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/30404-hard-lens-installation-idea/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/41723-cover-strips-extending-to-bottom-of-thighs/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/40510-advice-on-lower-leg-armor-anh/, restored by gmrhodes13 11

Just be aware if you are seeking 501st legion approval it would be very hard to make foam armor to that basic standard. If it's for a hobby or Halloween go for it In case you are interested 501st base requirements can be found here https://databank.501st.com/databank/Costuming:TK_anh_stunt

Also if you are not award we have a gallery section full of screen references which will help you with your build https://www.whitearmor.net/forum/gallery/category/24-anh-tk-reference/ Posting a build thread will also get you feedback on how your build is going For ANH builds head to this section https://www.whitearmor.net/forum/forum/80-anh-build-threads/

Hello and welcome to the forum, if you are an approved Stormtrooper you can request higher access here Hola y bienvenido al foro, si eres un Stormtrooper aprobado puedes solicitar un mayor acceso aquí

Nice work good luck with approval, just watch the alignment of your legs, coverstrips should be aligned with each other. Also make sure you push those glove ends into the forearms

Hello and welcome aboard, looking forward to seeing your BBB. You will find a lot of useful info in this thread