gmrhodes13

I'd be really interested to see over time if there was any bleed through, some paint and thinners can react with ABS and colors can bleed. I don't use the same paint/covering I normally just use enamel satin spray paint, doesn't reflect light having a dull finish and also doesn't affect the ABS, I made sure I tested that before using it. Just for interests sake I saw this on a recent EIB request, looks like a material not a paint/coating but still very cool, I'm not sure how it will go with sweat though, can get pretty wet in there, I know I've removed my armor after a hot troop to find a waterfall of sweat inside the backplate and chest

Appears you haven't given your correct profile link, should be https://www.501st.com/members/displaymemberdetails.php?userID=32650

When they fist started charging you had the option of downloading all of your photos at one go but unfortunately they changed that option after a period of time, now it's a case of having to download every image one by one, I'm glad I was able to save them all in one go, it would take me 50 years to save them all one by one

https://www.whitearmor.net/forum/topic/25942-doopydoos-stuntpromo-esb/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/26649-esb-greeblie-stunt-dvhtango-d-fett-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/28250-my-doopy-doo-esb-e-11-blaster/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/27376-esb-dd-e-11-build-wip/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/29832-ddaydvh-esb-promo-pipe-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/30369-phoenix-props-esb-e-11-pipe-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/26883-creating-the-esb-greebliesrail-for-the-dvh-kit/, restored by gmrhodes13

In the past if you wished to save Photobucket images that have been watermarked you could right click on an image in a post and select "open link in new tab" now this would take you to an unwatermarked image BUT depending on what account and when you started it this will no longer work, Photobucket have gotten the gist of this cheat and on some accounts they have changed what you are directed too, a generic sign up page no matter what image you try to open Fear not here is a work around On the image on our forum, right click it and select "copy image link", Then paste this into the header of any page (blank or not) and use "paste and go" This will then open the watermarked image, you then need to delete some of the code in the header, you want to keep the http://to the end.jpg Like this Highlight the front code before the http://i34.photobucket and click backspace Then highlight the end code after .jpg, click backspace then click enter You are now left with the unwatermarked image You can now right click and save the image This is a little time consuming with multi imaged threads but it works, so TAKE THAT PHOTOBUCKET

Any areas which can have strain on them, shoulder straps, shins, stubborn alignment pieces and alike it's always best to wait at least 48 hours for E6000 to cure

Sorry perhaps I should have explained it better, if you are asking if you can enter the ESB build areas YES you should have access already. You may have missed this piece below, you can't access approved detachment areas (like merchandise) until you are approved and have your TKID

Not something that has been a mentioned at higher levels, on this display you can not see a seam on the rear so I would suggest they should face inside.

You fill out your 501st application the same time as seeking GML approval, your GML needs a 501st application in the works to finalize approval, once the GML gives you approval the rest of the process is handled by the legion officers who will issue your TKID. Once approved you seek higher access on MEPD here, once granted you may apply for "Police" then on to "Swat" once "Police" approved.

I don't have access to a figure (yet) but looking generally at the box the cod appears to be TFA styled with the inward curved sides, this would mean the forearms should have the same TFA style to them as below with the curve, no cut out TFA on left, TLJ on right. TFA curved by the looks, no black paint on the forearm front pill box inner square

Unfortunately I don't have that level of access but I'm sure @justjoseph63 or @Sly11 can organize that (it's right in the newsletter )

Not sure what you guys use in the US but down under this mesh is used on windows, flywire we call it, so you can have your windows open to let air in but not bugs. It also comes in non plastic which works just the same.

You can join any detachment as a recruit/member but you can't get 501st legion approval before owning a costume and having GML approval (garrison membership liaison) . Once you are approved you can seek higher access as a 501st member in any detachment BUT there is also an even higher level of access if you are approved with a costume which falls under that particular detachment, then you can apply for higher costume approval, MEPD has Police and Swat, here at FISD we have EIB and Centurion. Info on joining the 501st can be found here https://www.501st.com/members/join_form.php

Thats why we always advise people to check the gallery sections, lots of great references there

You are replying to a thread from Jan 2019, I think it's a bit late for feedback

2nd photo looks like a slightly small gap between the back and kidney. As long as the elastic doesn't feel too tight and nothing is digging in you should be good to go. I find marking should strap positions with tape is an easy way to get them sitting right when gluing. Normally there is the large tab and 4-5 small tabs on the front, but that is the ideal not an absolute must

WOW just WOW, very very shinny

There is some contact info in this thread but appears to be quite old, may be worth a try troopertk409(@gmail.com

Used to have a sales thread here but seems to no longer be active, I'll have a dig around

Version 1 Version 1 no front disk Version 2 PROMO/SNOWTROOPER \ Propstore Scope differences M19 Scope

If you have any issues let me know

Great work, just a few things you could address before the DO's get started. Looks like you may still have a little return edge left Not a hold up but you could move your TD screws close to the ends of the brackets Appears you have a small gap between your ab and kidney Any gap between the abdomen and kidney armor is no more than 1/2" (12.5mm) wide Watch your belt next time you suit up as it is on an angle on the rear On the side image it looks like your belt has dropped down at the front. You may also be able to see a little bit of your neck seal coming out between the chest and shoulder bell Looks like you have a little too much paint on the tops of the teeth, common to Anovos helmets. Also a little extra material in the middle top of the lenses Sniper plate is not quite on the ridge Sniper knee plate must be aligned with the ridges on the shin , also could trim the curved area from the top sides Blaster handles where plastic so no weathering should be seen Good luck with approval

Hi there you appear to be having some issues with your images, you need to use the "direct link" option https://i.imgur.com/3GUnW39.jpg

https://www.whitearmor.net/forum/topic/15772-esb-e11/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/16515-e-11-esbrotj/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/18197-esb-blaster-resin-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/19637-chucks-canon-esb-e-11-build-thread/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/17111-seans-esb-canon-e-11-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/20044-blaster-question/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/20293-esb-e-11-pipe-build-hollow-with-spring-and-long-bolt-and-inner-barrel-wire-d-ring/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/21608-tk-8461s-esb-pipe-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/20529-blasters-the-difference/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/23625-starting-my-first-esb-e-11-pipe-buildwhich-plans-etc-pipe-diameter/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/23831-e-11-blaster-scope/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/25631-any-info-on-this-esb-e11-kit, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/47699-looking-for-comparisons/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/25943-prop-store-of-london-doopydoos-pipe-build/, restored by gmrhodes13

I would suggest moving to the build sections, you will get a lot more feedback there, ANH is here https://www.whitearmor.net/forum/forum/80-anh-build-threads/