gmrhodes13

Chatter sounds can be found here other blaster sou d effects can be found here https://github.com/Protonerd/FX-BlasterOS/tree/master/Sounds Also these http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_01.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_02.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_03.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_04.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_05.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_06.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_07.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_08.mp3 http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_11.mp3

Great progress, well done. I know it can drop fast at first then can slow but every bit counts.

Stunt and kill sounds are in the post prior to yours. I'm not aware anyone has F-11D sound files. F-11D file I ran across First_Order_F_11D_Blaster_Rifle_Sou_(getmp3.pro).mp3 Phasma/Cardinal version Star_Wars_Captain_Phasma_F-11D_Blas_(getmp3.pro).mp3

A nice trick when you have applied spray putty or high build primer is to go over with a very light mist coat of black, then when you sand any low spots or scratches will still show some black, spray painters trick

Not R1 but I used base white spray cans from an automotive supplier for my FOTK, I'd gather R1 would be similar if not the same as FOTK, the base white matches both of Anovos's OT and FO helmets (maybe the paint would match Denuo Novo ). Jeff "11B30B4"used Ford Frozen White you can find his build thread here

Here's a 4.5 For a good base build even though it's 1.0 you can't go past Ukswrath

Great news, we should be seeing some BBB photos soon

Those are the only ones I could find, I'm not sure if anyone else on staff has any. I haven't even seen the hi res legion images, I don't think they were added to that forum, only the ones another member had taken which has been added.

UPDATE 28/6/2022 Received shipping label, went to postal office and unfortunately it won't scan into the Australian Post system, awaiting another response from Denuo Novo Customer Service

Very nice work

You will find with a lot of resin helmets they can sag in excessive heat, I had one sitting on top of a pipe in the shade as I just painted it, was @30degC but I thought in the shade would be ok, looked an hour later and it had sagged and left a ring in the top the same as the pipe it was sitting on, a little heat and it was fine. I've not heard of anyone having the issue while trooping, I guess with padding and sitting on the head it should help to keep it from sagging

From the previous page: https://www.whitearmor.net/forum/topic/42662-anovos-denuo-novo-fotk-armor-delivery-possibility/?do=findComment&comment=742473 Posted it on the Facebook group, but figured I'd share here as well - I had a very positive conversation with Mark Von Ohlen at the Denuo Novo booth at Celebration, and he shared that the First Order Stormtrooper suits have been completed and are currently on their way across the ocean from China, with shipping expected in June.He was very straightforward and seemed confident in this deadline, as well as their upcoming release schedule. I know we've all heard it before, but so far Denuo has been true to their word and has been working their way through the backorders to dig out of the massive hole Anovos dug. He also confirmed that the posting was originally mislabeled and that everyone will be receiving an "upgrade" to the TLJ armor shown, not the TFA armor ordered (though now I'm hearing they emailed saying everyone will get the suit they ordered, so unsure if that means TFA for old orders?). Helmets will not be included at this time if your order had one missing, and they're projecting Q4 for both TFA and TLJ if I remember right. It sounded like those orders with soft goods will get them in a separate shipment.

There is also the Personal For Sale section here https://www.whitearmor.net/forum/forum/11-for-saletrade-personal-items-only/

Also https://www.starwarshelmets.com/original-ANH-Stunt-Stormtrooper-armor-helmets.htm

I think this one has a touch more light, but yes doesn't look very thick

You need to use some force with some pieces, I use a combination of clamps, magnets and masking tape. Once you have one side glued and is held solid apply to your other side, push down so the sides bulge a bit then wrap a good amount of tape around, when you relax the pressure the tape should still keep the cover strip held down. Some use strips of wood or metal to help hold down the center sections and clamp both ends. Front Rear This doesn't really fall under "forum support" so I will move the thread to the ANH build area

Amazing how a different set of eyes can pick something not seen before, nice catch. I agree with Tino I think it's just the cylinders and mount, tried to sharpen the image a little. Definitely see the square greeble. This Hengstler has seen better days, lots of holes, I've not noticed it before, the more you look the more you see.

You can even find once you have been trooping and moving in armor you may need some minor adjustments

Personally I don't think it's too big, as the chest angles back you won't see the whole opening, however the top inner looks to be a little bit curved, you could add some automotive filler (bondo) to make this straighter but I'd wait until you have it fitted to see if it's noticeable Here's how I added mine

A touch, the average kit sizing is @ 5'11"- 6' so some trimming may be necessary, some info in those threads show trimming as well as adding return edges, although they are not compulsory

I use automotive resin and fiberglass matting to strengthen some 3D print pieces, has worked well, just can't add too much hardener as it causes a lot of heat.

Could you post some photos fully kitted up so we can see the gaps. These threads are for those of shorter height, may find some sizing info in those https://www.whitearmor.net/forum/topic/38416-crickets-rs-stunt-build-for-the-vertically-challenged/ https://www.whitearmor.net/forum/topic/38842-fragarocks-rs-stunt-build-not-to-scale/ https://www.whitearmor.net/forum/topic/42868-sha-shas-wtf-anh-stunt-build-complete/

If you wanted to gain 501st legion approval you'll not find a full costume for under $500 But if you want to just were something for Halloween or similar event try eBay.

Looking good. Just note those images are a little small for your GML and he/she may request larger ones Looks like you have a strap hanging down under your helmet too

One of Albin's versions https://www.jedinews.com/collecting/articles/20th-anniversary-501st-squad-gold-patch/ He's got another run going on FB with other versions of the early designs