Leaderboard

Sorry for the delay, updated! @DarthBiscuit @AradunFF @CharlieMcN33l @BuzzBomber @MightyAtom @Chris1880 @Zorg @Mzungu @TxTrooper @MARKVADER if you can pm me a screenshot of your profile info I'll sort you out. @TK 10738 please link your profile.

I've belonged to clubs and groups before and it has been pointed out that around 15% of the members do 85% of the work. Even though I am very new to all of this, Glen sticks out as one of those guys that is so involved and contributes so much. Good people here and it shows by the quality of leadership present. Congratulations, Glen! Maybe you can get a new badge or something to adorn your post signatures! I'm sure there is room for one more! LOL!

Joseph, Thanks for the feedback. You are correct about the screws there was a small amount of dome on them (truss). I located the correct screws and have installed them. Here are pictures of them painted: . I also have trimmed the ammo belt per Glen's instructions. Please let me know if there is anything else that I need to adjust. Thanks again.

Thank you so much for making time for my review for centurion. I have already corrected the frown issue so we can start smiling again soon. Blaster is a non issue and the fault lies in the photo angle. I believe the Counter is placed in the correct place. Will upload those photos when I’m near a PC and can access my Imgur account. (Silly cel phone) Been in contact with RTMOD and I am waiting for cost of parts and shipping quote. A new ammo belt, button covers, and ab button covers will be obtained. In addition I gotta order a new belt from Kittell because the one that didn’t make the cut, has 5 years of troops on it and the inner parts that keep it firm have deteriorated. Yep, the whole thing is getting redone. I’m hopeful these fixes will not take very long, but I’ll get them corrected and knock this out of the park!!

Painted the grey on the ears and upper back areas. currently working on the teeth (which have been a pain to tape off), then to paint the brow and neck rims black (I'll post pics once both are done). Also, I'll be releasing the Rogue One inspired versions of the helmets for free, which were modeled for me by my friend Skylu3D. Use and edit them how you like, but remember to credit Once everything with my current helmet file is figured out, that will be released (either for buying or free). Phase 3 Rogue One v1: https://drive.google.com/file/d/1hn6QW9nAtP4bhwhC6u8QJ_XPwJKvFmqX/view?usp=sharing Phase 3 Rogue One v2: https://drive.google.com/file/d/1a0L2xgB-zXguqfX7KxO4bOqxAoYOJ2Lp/view?usp=sharing

Was my pleasure trooper, congratulations once again and welcome to the ranks

I realized I had taken a few other photos during construction that my be pertinent to this application: Filled lower thigh gaps ( I actually liked it so much for strength and aesthetics, I filled all of my edge gaps on the tops and bottoms of the thighs, biceps, etc): Inside ab split rivets (coated the sharper edges with white E6000 to prevent snags): Let me know if there are any other pics needed

Congratulations and welcome.

Nice work Ken!!!... Good luck with your application

Very nice trooper, wont be long now.

Hey trooper, For me, I do an initial rough trim with lexan scissors, then fine tune with the Dremel and a sanding attachment. As below; ------------

It’s all for the Empire my friend. Here are the retakes with all of the suggested changes. Those little adjustments do make a world of difference. Full Body Updates Front Rear Right Full Body Left Full Body Sent from my iPhone using Tapatalk

I thought I'd be more productive, but the time off has been nice. Been pretty lazy, but the build is in a good spot now. Got the chest/shoulder rig thing ready to try out. Seems sturdy and comes up my arms high enough. With the back yoke on these should tuck in nicely. Waiting on the day I can put time in for the test fitting and measurements. This is an encouraging photo. Everything except the cape and helmet are in the box. A little First Order tetris organization and I'm sure the cape will put a snug finish to the bin. Hoping to get the cape length finalized, whole kit weathered, and final strapping tomorrow. Fingers crossed for some test photos!

Congrats on your RS purchase, Svante! Since a set of armor is a large investment, I highly suggest starting your own build thread here on the FISD. That way, you can post lots of photos during your build (which is especially helpful if you have a problem) and ask us anything you need to. Here are some links that may help: 1. Supply list- Here 2. Build thread forum- Here 3. 501st CRLs- Here 4. CRL Quick Reference- Here 5. Posting photos- Here Always, always ALWAYS feel free to ask any questions you may have, Svante... we are here to help every step of the way!

Had to remind the youngling... “it’s that time of year, and Anakin is always watching!”

Great work and thank you for sharing, you could also post these in the 3D section https://www.whitearmor.net/forum/forum/202-3d-file-depository/

Hi all, this week I decided to buy a RS Kit. I have ordered today. I was waiting for black Friday :). So the decision is finaly made

I will order, these, drill holes, and add collets to secure these in my Hellcat. MUST HAVE

If you ever need something from the US, PM me. Provided it’s not too large and you’re paying for shipping, I’m happy to see about getting it here and shipping it to you mate.

Shins are done! The left had a little gap but both have strong connections and don’t come apart. Next up the dreaded sniper knee plate.

Daves Darkside Depot is now selling the AM 4.5 versions , you can find him on Facebook. PM me if you would like his phone # , just got a commission build from him. Extremely durable and shiny ABS , recommend. Take a look around there are several nice builds with his armor.

Nora Escrich Tk 26590 EIB A4 Mario - Tk Spartan http://www.whitearmor.net/eib/certificates/26590-eib.png

just note i made an easy assembly board to make the work easier and better. Just succesfully completed its testing, the sound is loud and clear, no clipping or noise, thanks to PCB connections. With this board it will be easier to fit arduino and their components inside the PVC pipe, saves extra cables and work, no mistakes. Size WxLxH mm main unit: 91x29x21.8 drivers module: 41.5x29x18.70 bar leds module: 35.5x19.5x9.85