equuspolo[TK] Posted February 20, 2021 Report Share Posted February 20, 2021 (edited) Name: Ardeshir Radpour Username: equuspolo TK-42128 Southern California Garrison Los Angeles Squadron Height = 5'10 Weight = 165 Armor Maker = KB Armor - Trimmed to fit like Anovos Helmet Maker = Anovos Premium Fiberglass Boot Maker = Imperial Boots Gloves = Endor Finders Belt = Trooperbay Belt Pouches = Trooperbay Pauldron = Trooperbay Neck Seal = Imperial Seamstress Holster Maker = Dan Sczudlik Gaskets = Geeky Pinks F-11 = Branfuhr Studios Resin Kit- Custom built by me with custom light system. Electronics = Wireless Microphone with Acker Amp Custom Parts = Chest yoke and Backplate welded together with ABS Slurry. Chest Pills and Chest cut out backed with Textured Fabric, TD slurry welded. Entire armor painted with Rustoleum 2x Glossy White. Belt, Cod, Butt Plate attached to armer with Anovos leather waist tassets Edited May 30, 2021 by equuspolo 5 Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted February 20, 2021 Report Share Posted February 20, 2021 Again with the beautiful well taken photos Good luck sir, you look awesome yet again. Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 20, 2021 Report Share Posted February 20, 2021 Ardeshir, Ardeshir, Ardeshir.. you are truly a TK building animal! Awesome job on this as usual, brother, and one of us will be with ya' as soon as possible. WELL DONE! P.S. I edited your title to add EI. Quote Link to comment Share on other sites More sharing options...
Greg S[TK] Posted February 20, 2021 Report Share Posted February 20, 2021 Wow brother another beautiful build brother. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 20, 2021 Author Report Share Posted February 20, 2021 (edited) 6 hours ago, Sly11 said: Again with the beautiful well taken photos Good luck sir, you look awesome yet again. Thank you Brother. I appreciate it. Edited February 20, 2021 by equuspolo Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 20, 2021 Author Report Share Posted February 20, 2021 23 minutes ago, justjoseph63 said: Ardeshir, Ardeshir, Ardeshir.. you are truly a TK building animal! Awesome job on this as usual, brother, and one of us will be with ya' as soon as possible. WELL DONE! P.S. I edited your title to add EI. Joseph thank you brother. Appreciate it very much. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 20, 2021 Author Report Share Posted February 20, 2021 17 minutes ago, Greg S said: Wow brother another beautiful build brother. Thank you Greg. This was a tough one but I learned a lot. Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 21, 2021 Report Share Posted February 21, 2021 Another clean application Ardeshir 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 21, 2021 Author Report Share Posted February 21, 2021 19 minutes ago, gmrhodes13 said: Another clean application Ardeshir Thank you Glen, appreciate it brother. This one made me nervous and I sat on it for a year hahaha. But I learned a lot. Already started my Anovos kit. That one is going to be insane. So pretty excited about it. I'm super happy with this one and excited to be part of the First Order. The Anovos Kit that I got is a never released version and super super nice. Gonna take my time with it. Thanks for the encouragement brother. Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 21, 2021 Report Share Posted February 21, 2021 The armor army man !!! Great Work Ardeshir. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 22, 2021 Author Report Share Posted February 22, 2021 20 hours ago, TKSpartan said: The armor army man !!! Great Work Ardeshir. Man thank you brother that means a lot 1 Quote Link to comment Share on other sites More sharing options...
TheRascalKing[TK] Posted February 22, 2021 Report Share Posted February 22, 2021 Looking good, Ardeshir! You got this! Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted February 22, 2021 Author Report Share Posted February 22, 2021 1 hour ago, TheRascalKing said: Looking good, Ardeshir! You got this! Thanks brother. Can’t wait for your kit. 1 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted March 1, 2021 Report Share Posted March 1, 2021 Hi Ardeshir, and thank you for your EIB application! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Another Ardeshir's great set of armor !! Well done sir. and let see your EIB review. Starting from your belt, We noticed that your black pouch is a bit angled downwards, could use some stiffening and straightening... easy fix! Reference images Moving on your TD, the right cap should have a secondary edge inside the inner end. This could be accomplish gluing an ABS ring piece , some ABS paste and paint session. Reference images and for more screen accuracy it should have a separation between mount and plate of the TD. Reference images Also in your TD, There's a noticeable gap between your TD and the backplate that you may want to make some adjustment to reduce it. Reference images Just a dressing issue here, we noticed that your right knee plate is a little misaligned, as per the reference images below. Easy to deal with it. Reference Images One detail to give your Blaster a very great look is to add some Texture to your grip and de front handle. One possible solution would be using some Rubber Textured Gun Grips Material Sheet . Reference Images *************************************************** Centurion Requirements; In this section we prepare you for Centurion. Because Centurion photos show more detail than EIB, items pertaining to Centurion might be seen there and not here and additional photos may be required. We try to point out all that we can from what we see, but the final accuracy is the responsibility of the trooper. CRL L3: Forearm wrist box should be separate pieces, affixed to forearms. Forearm top plate is not attached at front of wrists. This is a more challenging fix that would include some trimming, re glue and perhaps some ABS paste and paint job , but you have show us you have great capacity to deal with this kind of mission ! Reference Images Finally Trooper. CRL L3: Gaskets shall be made of rubber. Fabric gaskets are not acceptable. Yours appear to be fabric gaskets, so they will need to be replaced for the next level ones. Reference images That's all Ardeshir, Congratulations for that great build and fantastic set of photos, welcome to EIB !! Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted March 1, 2021 Report Share Posted March 1, 2021 Congratulations once again trooper Quote Link to comment Share on other sites More sharing options...
giskard8[Staff] Posted March 1, 2021 Report Share Posted March 1, 2021 Congratulations Trooper! Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted March 1, 2021 Author Report Share Posted March 1, 2021 (edited) thank you very much Mario. Noted on the changes. Some of them will for sure be a challenge. I will see what I can do if I decide to take this to centurion. I’m building an elite Anovos kit now so I may reserve centurion for that one. But we will see. And I already have my rubber gaskets that are a screen made set. So we will see. The only thing on this one is that my photo mistake is that the blaster has rubberized grips that you can’t see in the photo. So I will make sure it’s clear on the next batch. I will see what I can address on changes for this and see about submitting for centurion. Thank you for the time and guidance and encouragement. Appreciate all of your input as always. Edited March 1, 2021 by equuspolo 1 Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted March 1, 2021 Author Report Share Posted March 1, 2021 3 hours ago, gmrhodes13 said: Congratulations once again trooper Thank you brother. Appreciate it Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted March 1, 2021 Author Report Share Posted March 1, 2021 2 hours ago, giskard8 said: Congratulations Trooper! Thank you very much Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted March 1, 2021 Report Share Posted March 1, 2021 You have made this quite the habit lol, another huge congratulations Ardeshir, looking fantastic and passing with ease. Quote Link to comment Share on other sites More sharing options...
Greg S[TK] Posted March 1, 2021 Report Share Posted March 1, 2021 Wow awesome congrats brother. Quote Link to comment Share on other sites More sharing options...
TheRascalKing[TK] Posted March 1, 2021 Report Share Posted March 1, 2021 Congrats, Ardeshir! Beautiful work and photos, as always! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted March 1, 2021 Report Share Posted March 1, 2021 Fantastic job Ardeshir congratulations on another fine set of armor Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted March 1, 2021 Author Report Share Posted March 1, 2021 5 hours ago, Sly11 said: You have made this quite the habit lol, another huge congratulations Ardeshir, looking fantastic and passing with ease. Thank you brother, appreciate it. Not sure about ease but certainly fun. Mostly because of all of the help and encouragement from everyone here. Quote Link to comment Share on other sites More sharing options...
equuspolo[TK] Posted March 1, 2021 Author Report Share Posted March 1, 2021 4 hours ago, Greg S said: Wow awesome congrats brother. Thank you brother. Appreciate it 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.