ukswrath[Admin] Posted April 13, 2020 Report Share Posted April 13, 2020 As we continue to improve our support for the FOTK we've comprised a list of all the Hard & Soft goods vendors to help you with your build. We will continue to monitor and update the list as needed. Just a reminder the FISD does not endorse any particular vendor, nor is responsible for any transaction between you and the vendor. Please do your research before purchasing. Armor: Jimmiroquai - Origin PHILIPPINES: Kits are partially assembled/fully trimmed lightweight fiberglass (ready for rigging and painting). No issues with quality or service reported. Contact for delivery times/price details. Link Here, Email KB - Origin USA: Kits are made of ABS and will need to be trimmed and assembled. No issues with quality or service reported. Contact for delivery times/price details. Link Here, Email Here Armoryshop Props - Origin RUSSIA: Supplies a range of First Order Armour and Specialised 3Dprinted Helmets Link Here Armor vendors under review: 850 - Origin USA: Kits are made of ABS and will need to be trimmed and assembled. No issues with quality or service reported. Contact for delivery times/price details. Link Here Imperial Surplus - Origin USA: Kits are made of ABS and require trimming and assembly. Quality has been solid and service good when he is producing. Link here WTF - Origin USA: TFA and TLJ new kit awaiting member feed back and reviews for quality etc. Kit made of ABS with some resin parts. Anovos- Offers a "Pre-order" FO kit at this time, but due to legal issues and extended (1 year plus) wait times is no longer recommended. Soft goods vendors: Soft goods assorted (Soulart) - Origin CANADA: Neck seals, Harnesses, Shiny biker shorts, First Order gaskets, Phasma capes. Link Here Soft goods assorted (Imperial Gaskets) - Origin USA: Rubber gaskets, Pauldrons and Waist belts. FB contact Soft goods assorted (Trooper Bay) - Origin USA: Link Here Under Suit - Stormtrooperundersuit Link Here Gaskets - Sheev's Emporium - Link Here (Facebook sales page) Belt - Belts of the First Order (JAFO)- Origin AUSTRALIA: Link Here Boots - Imperial Boots Origin CHINA: Link Here Gloves - Imperial Boots Origin CHINA: Link Here Endor Finders Origin USA: Link Here Neck Seal - The Dark Side Closet Link Here (Facebook sales page) Sheev's Emporium - Link Here (Facebook sales page) Suspension - Awaiting vendor Waist belt pouches - Trooperbay Origin USA: Link here Hardware vendors: Holster - R2Dan. Origin GERMANY: Other hard accessories available by application Link Here Hand Plates - As above Shoulder bell supports- (Accuracy upgrade) - ukswrath Origin USA: Link Here Waist belt center box base (Accuracy upgrade) (Empire 3D) - Origin AUSTRALIA Link Here Machined metal components - Justin Morrison Origin UK: Parts for Blaster rifle and pistol mounting, Resin holsters and other greeblies, machined metal components and more. Email Here FB links https://www.facebook.com/groups/1654472361474254/user/802819468 https://www.facebook.com/kingleezard Helmet Lens - OPLE props Origin GERMANY: Link Here Accessories: Pauldron - Imperial Gaskets Link Here Email Link Here imperialgaskets@gmail.com Trooperbay- Link Here Riot Shield - Awaiting vendor Tactical Vest - Awaiting vendor 3D files: 3D print (general) - 3D print files F11D (The5thHorseman) - Link Here 3D print files SE-44C (The5thHorseman) - Link Here Commission builders: Crooknight - Crookknight@gmail.com dbetters - dan@thetown.org Building Guides/Thread,Tutorials & How To: Please refer to Building guides ... Weapons: Please refer to Vendors weapons list... 9 Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted April 14, 2020 Author Report Share Posted April 14, 2020 Hey troopers if you have a supplier/vendor you like to see added to the list let us know 1 Quote Link to comment Share on other sites More sharing options...
dbetters Posted April 14, 2020 Report Share Posted April 14, 2020 Not sure if you are posting trusted vendors for Commission work, but I've done about 20 commissions specifically for FOTK as well as other sets of armor. But I started with FOTK commissions. No worries if that isn't the type of thing being posted. 3 Quote Link to comment Share on other sites More sharing options...
wilsoncai[TK] Posted April 14, 2020 Report Share Posted April 14, 2020 (edited) For SLA printer printing services, I recommend 'The Imperial Factory'. www.facebook.com/TheImperialFactory/ With permission from Garmin, they have printed a couple of SE44C and F11-D for some troopers Edited April 14, 2020 by wilsoncai 3 Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted April 14, 2020 Report Share Posted April 14, 2020 7 hours ago, wilsoncai said: For SLA printer printing services, I recommend 'The Imperial Factory'. www.facebook.com/TheImperialFactory/ With permission from Garmin, they have printed a couple of SE44C and F11-D for some troopers Wilson's prints are amazing. The quality is continuously awesome. 1 Quote Link to comment Share on other sites More sharing options...
wilsoncai[TK] Posted April 15, 2020 Report Share Posted April 15, 2020 Wilson's prints are amazing. The quality is continuously awesome.Haha thanks for vouching@Sly11 Sent from my Redmi K20 Pro using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted April 15, 2020 Author Report Share Posted April 15, 2020 9 hours ago, dbetters said: Not sure if you are posting trusted vendors for Commission work, but I've done about 20 commissions specifically for FOTK as well as other sets of armor. But I started with FOTK commissions. No worries if that isn't the type of thing being posted. Do you have specific contact you'd like to use? Quote Link to comment Share on other sites More sharing options...
Anzo[TK] Posted May 12, 2020 Report Share Posted May 12, 2020 Is there a reason KB isn’t on the armor list? Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted May 12, 2020 Author Report Share Posted May 12, 2020 51 minutes ago, Anzo said: Is there a reason KB isn’t on the armor list? The list is fluid, we'll be making changes soon. 1 Quote Link to comment Share on other sites More sharing options...
CDEV-991 Posted May 17, 2020 Report Share Posted May 17, 2020 Any source on lens material for an FOTK helmet? Apologies if this is a total noob question. I really, really looked. I see green lens material being used in different trooper builds, but I don't know if that's appropriate for FO. Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted May 17, 2020 Report Share Posted May 17, 2020 VaderPainter Studios on FB supplies bubble lenses 1 Quote Link to comment Share on other sites More sharing options...
funkster[501st] Posted May 18, 2020 Report Share Posted May 18, 2020 14 hours ago, gmrhodes13 said: VaderPainter Studios on FB supplies bubble lenses Vader Painter has shut down. Went to him for an aerator last year. 2 Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted May 18, 2020 Author Report Share Posted May 18, 2020 5 hours ago, funkster said: Vader Painter has shut down. Went to him for an aerator last year. Thanks for the heads up Mark Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted May 18, 2020 Author Report Share Posted May 18, 2020 20 hours ago, CDEV-991 said: Any source on lens material for an FOTK helmet? Apologies if this is a total noob question. I really, really looked. I see green lens material being used in different trooper builds, but I don't know if that's appropriate for FO. I think ArmoryShop Props on FB sells them 2 Quote Link to comment Share on other sites More sharing options...
themaninthesuitcase[Admin] Posted May 19, 2020 Report Share Posted May 19, 2020 For the visors, has anyone used Ople before?https://www.etsy.com/uk/listing/682238330/ople-props-first-order-stormtrooper?ref=hp_rf-1&cns=1 Reviews look good and images seem to look right as well. 1 Quote Link to comment Share on other sites More sharing options...
Anzo[TK] Posted May 19, 2020 Report Share Posted May 19, 2020 5 minutes ago, themaninthesuitcase said: For the visors, has anyone used Ople before?https://www.etsy.com/uk/listing/682238330/ople-props-first-order-stormtrooper?ref=hp_rf-1&cns=1 Reviews look good and images seem to look right as well. I am working with him right now for a Mando visor. Been fine so far and Garrison mates have worked with him before. 3 Quote Link to comment Share on other sites More sharing options...
Hoda[Staff] Posted May 19, 2020 Report Share Posted May 19, 2020 For the visors, has anyone used Ople before?https://www.etsy.com/uk/listing/682238330/ople-props-first-order-stormtrooper?ref=hp_rf-1&cns=1 Reviews look good and images seem to look right as well.For what it's worth, I've worked with Marc @ Ople before but for my TR. Lens came out great, and he was awesome to communicate with. 3 Quote Link to comment Share on other sites More sharing options...
themaninthesuitcase[Admin] Posted May 19, 2020 Report Share Posted May 19, 2020 He replied quickly to me, need to get a test print knocked out so I can get some measurements to him. 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted May 19, 2020 Author Report Share Posted May 19, 2020 List updated Quote Link to comment Share on other sites More sharing options...
Revvek Posted May 20, 2020 Report Share Posted May 20, 2020 On 4/13/2020 at 10:53 AM, ukswrath said: 3D print files SE-44C (The5thHorseman) - Link Here Noticed this link is pointing back to the same page. love this new section! Going to be helpful as I try to build my first armor! 1 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted May 20, 2020 Report Share Posted May 20, 2020 4 hours ago, Revvek said: Noticed this link is pointing back to the same page. Updated 1 Quote Link to comment Share on other sites More sharing options...
bearings[TK] Posted November 2, 2020 Report Share Posted November 2, 2020 One more option for armor is Imperial Surplus https://imperialsurplus.com/product/first-order-stormtrooper/ Very happy to see this available (again). 1 Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted November 2, 2020 Report Share Posted November 2, 2020 2 hours ago, bearings said: One more option for armor is Imperial Surplus https://imperialsurplus.com/product/first-order-stormtrooper/ Very happy to see this available (again). Ahh Kevin Weir yes have added him to the list. Quote Link to comment Share on other sites More sharing options...
Motogpnut Posted December 23, 2020 Report Share Posted December 23, 2020 Anyone have any experience with Walts Trooper Factory for a FOTK? His regular storm trooper suits are incredible. The armor is pristine, If a little small from what I’m seeing. I’m not small. I’m 6’1” and 250. Bodybuilding size. But I have Sandtrooper kit coming from RS and I know they make their armor bigger. I also know theirs is closer to screen replica which what I love about their kit so much. Any issues with size or quality with WTF? Is it more screen accurate? Quote Link to comment Share on other sites More sharing options...
ukswrath[Admin] Posted December 23, 2020 Author Report Share Posted December 23, 2020 I've only built OTTK armor from Walt. I wasn't aware he was making FOTK now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.