Chemi

Hello James! Excellent work on the requested corrections for Centurion, but before we can move along, we need one quick (easy) fix. As per the CRL for Level 3, the outside edges of the drop boxes must align with the outside edge of the ABS belt. You can put a dab of glue behind each strap (E-6000 or similar) to hold them in place (it's just a matter of separating the strap from the belt and moving it over a bit). As soon as you get that fixed, please post up the photo and we can move along! Reference images

Hello James. I'm glad you submitted your application for centurion. I'll be with you shortly .

Looks good to me too. CRL L3 Any mobility cuts on back of piece do not go past raised ridges.

The paint job is awesome, Glen. What else can I say? You are a master...

Hi Jacob, and THANK YOU for your submission for ANH Centurion! CRL and Centurion Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of CENTURION Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Thanks for your application for Centurion, Jacob. First of all, thanks you for your application. Its always great to see someone wanting to take that extra step and make their armor look that much closer to screen accurate. Just one thing to mention. As seen below, your thighs are riding a bit higher and too close to the butt plate. You should lower them a little (this could help avoiding some armor bites). Reference images And that's all. Excellent job on your build. Congratulations on reaching Centurion level!

Congratulations Colin.

Good choice Richard!. They look much more accurate...And Good luck!!!

Congratulations!!!. Your armor looks great... Just one thing(second pic, thinking about the two trooping events in October) : -Although it is not required at any level: "Something that characterizes us(Stormtroopers) is that we are anonymous. Children(and "not-so-children" ) in Trooping see their characters with emotion and do not imagine that within that armor there is a fanatic like them. For this reason, we try, by adding a mesh behind the "teeth" of the helmet, to prevent our face from being seen through the holes in them". Welcome to the ranks, Tarkan!!!

Hi Ardeshir, and thank you for your EIB application! First of all, I would like to congratulate you for the IMPRESSIVE work.. CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. Note that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Your neck seal looks great and you have the correct number of ribs and shiny finish as required. It would be great if the zipper was on the front. Reference Images One thing to be aware of is that your forearms appear to be more like Finn's (TFA) than TLJ's. Finn's TLJ It looks like your TD is a bit angled. Reference Images We have noticed that the shorts wrinkle around the cod piece. This is an aesthetic problem. We mention it for your consideration. Reference Images We are suggesting trimming your posterior plate to better reflect the angle as seen in TLJ. Reference Images *************************************************** Centurion Requirements; In this section we prepare you for Centurion. Because Centurion photos show more detail than EIB, items pertaining to Centurion might be seen there and not here and additional photos may be required. We try to point out all that we can from what we see, but the final accuracy is the responsibility of the trooper. If we are not wrong, it looks like your TD mount and TD plate are one piece, and although not specifically mentioned in the CRLs (they are currently being worked on),they should be 2 separate pieces (nice job simulating the joint). Reference Images About your Blaster, a rectangular "D-ring" must be present, and both it and the mount need to be white. Reference Images Another thing that we miss on the blaster is a light mount on the barrel also known as a Picatinny rail (Pic), which can be found online ( example ). Reference Images That's all Ardeshir. Just a few details that I'm sure will be no problem for you, seeing the quality of your armor. Again, very good job. Excellent armor. Congratulations . See you in your Centurion thread .

Hello Colin, thanks for your Centurion submission!!!

About the D-Ring of the F11D(I would add a couple of details): - D-Ring(rectangular) shall be present on the rear end cap. D-Ring and the mount painted white.

Congratulations Luke,welcome to the Legion. Your armor looks GREAT, good job!!!

Perfect Ardeshir!!!. Thanks!!!

Listen to Glen, do your research and buy something..

Welcome to FISD Jarocho!!! Congratulations for your recently established Panama Outpost. I hope you will achieve your goal and become one of the first TKs Panama.... ¡¡¡Bienvenidos al FISD Jarocho!!! Enhorabuena por vuestro reciente Outpost de Panamá. Espero que consigas tu objetivo y te conviertas en uno de sus primeros TKs....

Hallo und willkommen, Marco. Hello and welcome back Marco. You can do it!!!

Hello Ardeshir, thank you very much for your patience. Although your build is up to your usual outstanding quality, I'm afraid we have some bad news. Unfortunately your cod does not meet the requirements of L2, since has the distinct curves on the sides as seen in TFA (the image shown in the CRL is of the TFA version cod not the TLJ, something which will be changing with the current TLJ CRL review). We have multiple references of the TLJ type showing that those are not present and that the sides are more or less straight. Remember that "GML’s and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume". If you have any questions, the entire D.Os. team is at your service. TFA Reference image TLJ Reference images

Congratulations Dane Pace,

Welcome to the FISD Eric!!! It is normal, we all have doubts at the beginning... When you start to assemble your armor, those doubts will turn into happiness...

Congratulations JR!!!

POST 28 02‎ de ‎octubre‎ de ‎2020 - ASPERGER SPANISH GARRISON PHOTO: DANI MANTIS 1. [25 JUNIO] -- XV SALÓN DEL CÓMIC Y DEL MANGA DE CYL(VALLADOLID, SPAIN) SPANISH GARRISON 2.

Hello Scott , good luck with your build!!! Looking forward to seeing your pics!

Welcome to the FISD, Brandon!!! Keep us updated!!!!

Hi Austin, welcome to FISD. I am very happy that you want to join us!!! Browse the forum, there is a lot of useful info. Feel free to ask any questions you may have, and remember, we are all here to help! I wish you all the best (when you start college)!!!

Hi Darylee. Welcome to FISD . I really like the classic xwing pilot's helmet, although I prefer the TLJ helmet style