gmrhodes13

Congratulations trooper hope to see you issued with number soon, be looking forward to seeing you at EIB.

The CRL's for both TFA and TLJ will be undergoing a review soon, there are specific differences between the armor and no doubt many of these will be bought up in the proposed updates as a lot more references are available since the CRL's had first been made. Cod is definitely different and required for TLJ L2 EIB as most makers use the TFA design, the images below show the differences of those. Forearms are also different (without digging for better images, the below show the difference) TFA TLJ TJL Anovos You may find this spreadsheet useful https://drive.google.com/file/d/1GBkXIfRs9lYW6vnhVjqdEv5oNdp2ToTs/view

I use computer for the following not sure how to do the same on mobile. Go to the top right of the forum then click on your profile, select "account settings" then on the left of page select "signature" once there you can add images and links. To add your link go to web address bar at the top of your post and copy the URL, click where you want to add the link in your signature, use the chain "link" option on the menu above, paste the link into the URL field, then add a name for the ling in the "Link text" box. Hope that explains it.

Nice work, make sure you sand inside the bottom of the shins to get off any rough edges or they will cut into the boots

Nice work, looking much better

Looking forward to seeing you issued with numbers soon, good luck

Hello and welcome back, here are the current CRL (costume reference library) requirements: https://databank.501st.com/databank/Costuming:TK_anh_stunt have a read through those will give what has changed over time. One thing your boots look a little too cream compared to the amor, you may need to dye them a little whiter. Also check with your GML (garrison membership liaison) as it is ultimately he or she who will be approving your armor. Good luck

A few extra things to add to Jay's list: Brow trim should be straight. No extra paint on gums, should only be on teeth area. You don't have much room at our knees and they will catch, does appear that your shins could sit lower on the boots, some times a little heat is required to open the bottom of the shins so they are a little more rounded than oval. You could also add some scrab abs behind the knee lower ridge join, or even abs paste. Also on the tube stripes if you do move them up to a pencil width try to have the fall at the front greater. Back///////////Front Thigh rivets should be painted white. Something weird with your left calf back with the cover strip, can see 3 small squares, both outers should cover the inners so the opening can't be seen from the outside. Shoulder straps not sitting flush and central on the rear. You also have some white elastic showing on the top left should strap next to the neck. Helmet looks to be sitting quite high and there is a big gap at your neck, perhaps adjust the padding? Handguards don't appear to be held down tight enough, look at the right one at the back. You could also trim the handguards a little more, there is still a trim ridge showing. Right back thigh cover strip stops a little too short. Just some tweaks and I'm sure you won't have any problems. Good luck with approval.

Congratulations trooper and welcome to the EI ranks

Runs some fine sandpaper around the inside edge too, make sure there's nothing sharp there once trimmed.

I like it better in white In comparison I still think this is more impressive

A few others from the drawing board

Another build with discussion of shin arrangement https://www.whitearmor.net/forum/topic/41887-robs-wtf-anh-stunt-build/?tab=comments#comment-567552

Fig holding weapons ----------

Try not to have cover strips passing the armor sections, they can catch. Also try adding a little off cuts of abs behind your thigh lower ridge gaps, will just look a little nicer

Looking forward to seeing those BBB images.

Your images are a little small so it's hard to see some details. You have a big gap between your back plate and kidney, you may need tighter elastic there. Big gaps in the tops of the thighs, can you trim to fit better, showing a lot of black on the sides. Also something black hanging down over the thigh, perhaps a strap? Thighs could do to come up also as they appear to be touching your shins. Try to bring your shoulder bells in more, you have a lot of black showing Left bicep needs rotating, also adjust the gaps on our arms, one forearm is sitting under your hand plate, the other has a large gap. By the looks your ab plate appears it could come up more which will give you more room to bring your thighs up. TD not centred and belt slipped down over your butt plate There is also a gap at your sides, perhaps tighter elastic there or shims if you are aiming for higher levels. As I say some detail is hard to make out your images are 240x320 pixels and they could be at least 3 or 4 times bigger, you may also need to upload your images to an online photo host like Imgur, then copy and past into your thread. Looking forward to seeing some bigger images, if you get time try to do a few of the adjustments mentioned before hand.

Nice work, a clean build, I don't see much that should keep you from basic approval. A few things you could improve on for higher level acceptance. Butt plate is pulling inwards and overlapping the kidney plate, I came up with a tab behind system which helps stop them moving in or out Belt could come up a smidge There should be little gap at the shoulders between armor and the shoulder bells, you have a lot of black showing, perhaps try tightening the elastic, double over usually helps. There should be no paint on the gum areas around the teeth. Soft hand guards are required for L3, also you have a lot of black area at the wrists, I would bring your biceps down a little and also move the forearms closer to the wrists to reduce this gap. May need some thinner elastic straps on your shoulder bridges, can see a lot of white on the side. Shoulder bridges are only just sitting on the back plate, not sure if you can adjust this, perhaps try tightening the elastic between. You have a lot of gap between the thigs and shins at the rear, perhaps bring down the thighs a little, they appear to be almost touching the butt plate. Good luck with approval, look forward to seeing you at EIB and Centurion

----------

I like the F11D on steroids, that's one big barrel -------------

The stems and slit on Option 1 may be a little long but I've use similar and just added a washer or two. You can also hit Joseph @justjoseph63up for a set https://www.whitearmor.net/forum/topic/34902-centurion-level-rivet-sets-for-sale/

Unfortunately CRL's are not built on assumptions, all we can hope is they bring out a figure or official images (front back sides) of Cardinal.

Well in all my costume prefixes I don't have a TX so suppose I'm looking at getting one now It would have been nice though to see out the new trilogy films with the final Stormtrooper version falling under the FISD and TK designation, YER I know Spec Ops get's specialist troopers but it is still the base of a Stormtrooper. Reading the Phasma comic yesterday and there's a Stormtrooper with the id prefix DB, I want to be a Dead Beat too

Looking forward to seeing the progress pics

Congratulations trooper and welcome to the ranks