Leaderboard

I hope my GML doesn't see this since I'm submitting this weekend. And Mario, you never saw this. *force waves hand*

The explanation: Can't post DO Memes without an appreciation meme

So, a friend of mine just joined the JRS... Which is a bit of a sad statistic, tbh

^ high effort memes @Morgi! Impressive, most impressive. I was reminded of rage memes this morning and felt nostalgic

The second ever FISD Meme was about the DOs, can you believe it? We've come full circle

Yes, that's me on the right and my armor on the left. And it was definitely a very good decision to swap costumes for a while. It's not a troop, if I don't steal another trooper's headwear for at least a few minutes Is this a realistic goal? I don't know. Am I having fun anyways? Yes. Is this secretly just an attempt to show off my troop pictures? Maybe...

I can relate, Glen. The question is, did I stay up until 3am, or wake up at 3am.

Well if the response now comes in as memes then it must be good! Might get there yet since the legs are fitting quite well without much in the way of adjusting. Bart

This is the nylon stitch in that @revlimiter did which was easier than the velcro stitching. I'd say there is an improvement for sure on the shoulder gap to strap. The only other thing I could do to try and bring it even closer is to shorten the strap by a 1/4 or 3/8 of an inch so the question is am I splitting straws here now or is this quite decent? You alll know I'm obsessed about the arms. I can soon write a book on arm adjustments. There must be an intervention soon or I'm doomed. Bart

I definitely didn't play with AI art creation bots earlier today

A couple more from online

A few from online

Hello! I hope this topic is fine, if not, feel free to remove it. So, whilst I've seen memes pop up every now and then, I haven't seen any actual thread with memes about the FISD. Because I personally love commenting the things in my life in memes, I decided to make a few memes about the FISD, based on things that I've noticed on here so far. Please feel free to share your own memes as well, if you've got any This was something that I had a bit of trouble with in the beginning... Perhaps some of you can relate, haha Don't worry, we appreciate it I've only been on here for a short time, but during that time there've been a lot of armors by Glen. Most impressive! The struggle is real. Now I just need the money and to decide on what I am going to build. "Troopers helping Troopers" really encompasses the spirit of the FISD and I appreciate that very much. No explanation needed Feel free to share some more memes or to take this post down if it's too off-topic for the off-topic area

This is an All-In-One compilation of various resources for ANH Stunt Stormtrooper builds which will hopefully be helpful to prospective troopers as you get started and begin your research. Many TKs over many years have spent countless hours documenting their tips, tutorials, and builds, and this index includes posts and links which have been helpful on my own journey to the 501st. Printable PDF documents are included with select posts. This index will be updated as additional resources are created and identified by troopers helping troopers. 501st Legion Links: 501st Legion - Member Application 501st Legion - Available IDs 501st Legion - Garrison/Outpost World Map TK ANH Stunt CRL FISD Forums Getting Started - Read This First ANH (Stunt & Hero) Forum Tutotials, Tips, and How-Tos Vader's Valkyries (women of armour) Getting Started Forum Pinned Threads (selection) Various Types of Armor (Vetted Vendor List) by Daetrin Vendors to Avoid by RogueTrooper [NEW ADDITION] Common FISD Acronyms & Glossary by justjoseph63 Steps to Join the Legion by Dark CMF Cost of a Stormtrooper by Dday Imperial Attaché List by Pretzel Supply Lists OT TK Supply List by justjoseph63 (Print PDF) List of Soft Parts by justjoseph63 Build Tips and Resources Quick Reference Guide OT TKs by justjoseph63 (Print PDF) Armor Party 101 by justjoseph63 Return Edges 101 by justjoseph63 (Print PDF) Paint Color Guide by themaninthesuitcase Billgrams One Stop Shop (some diagrams may be outdated) Things/tips you wished you had on your build by DTKC and others How to paint ab button plates by JBar Magnets 101 by justjoseph63 (Print PDF) Butt-joining Armor by ZacMuleer Sanding Before Gluing by Shinyarmour1 Make Heat Gun Return Edges by pandatrooper Make Return Edge Sealing Iron by Daetrin Making ABS Paste by kman (Print PDF) Resize Armor with ABS Scaps & Paste by Harbinger (Print PDF) Armor for Bigger Troopers by ELP Altering Armor for Shorter Troopers: See Cricket's builds (WTF, RS Props) ATA Armor Sizing by Thrawndike bar Armor Fitment for Skinny OTTKs by Morgi V-Tabs for Kidney & Butt by gmrhodes13, Cricket's implementation, Colin's implementation Kidney Plate Shimming by Bullseye Fix Back Plate Kidney Overlap by A.J. Hamler (also in his build thread) Reinforcing Super Strong Shoulder Bridges by A.J. Hamler (Print PDF) Arm Armor Assembly by pandatrooper [ARCHIVED] Forearm Alignment and Shoulder Bells by CableGuy Thighs Assembly by pandatrooper [ARCHIVED] Thigh Trimming by Cgarduc Fill Thigh Ridge Gaps with Sugru by justjoseph63 Angled Mobility Cuts Behind Knees by ABS80 Attaching Flexible Hand Guards by justjoseph63 (Print PDF) Tips for Using E-6000 by jeebus68 and others E-6000 Safety Precautions (PPE) by cm325i Cover Strips threads: gazmosis, I'm Batman, sith_241, & Falciform13 ANH & ESB Cover Strip lengths and Ends by CableGuy Scribe technique for Cover Strips by chiefbonan Bending the ABS Belt by gazmosis, Boba_Skywalker3 Heat Bend Belt by pandatrooper Attaching Belt to Abs by GnrlGrievous Holster Placement on Belt by CableGuy Current (2021) Holster Placement by gmrhodes13 (follow-up to previous thread above) Belt Assembly by ukswrath Removable Holster with Snaps by Harbinger Belt, Holster, & Drop Boxes video tutorial by RWA (youtube) Combat a Fraying Canvas Belt by CallMeMrTibbles Thigh Ammo Pack Positioning by CableGuy Armor Thickness: 1.5mm, 2mm, Capped by Jakebullet Shoe/Boot Stretchers by justjoseph63, OneStrangeCyka GO TO Resources by ukswrath Strapping Systems Rivet Setting 101 by justjoseph63 (Print PDF) Snap Setting 101 by justjoseph63 (Print PDF) Snap Setting Hardware Solutions by TheRascalKing E6000 and Snaps Discussion by Harbinger, Snap Options by ukswrath Snaps with Rivet Heads by TheSwede Split Rivet Placement by DroidHunter How to Use a Rivet Tool by huttman How to Make Snap Plates by stukatrooper Elastic ABS Reinforcement by Cricket Magnetic Shin Closures by Cricket (Print PDF) Magnetic Shin Closures (supplement) by Zugor Alternate Magnetic Shin Closures by OddViking327 Types of Inner Strapping by Shinyarmour1 Internal Strapping by justjoseph63, nrgband RascalSnaps by TheRascalKing Thigh Garter System by Pencap510 Making Thigh Garters by Spectre Bicep Hooks by Pyrates and Brent Shin stabilization by Cricket and themaninthesuitcase Helmet Assembly ATA ABS Helmet Assembly by pandatrooper (Print PDF) ATA Stunt Helmet Assembly by Ales (Print PDF) ATA Helmet Build by maxsteele ANH TE2 Helmet Build by TK-4510 Helmet Ear Tutorial by gazmosis (Print PDF) Draw No Gap Ear Line by bpoodoo (Print PDF) Ear Trimming Foil Hack by trooper96 Choose Your Brow Height by CableGuy (Print PDF) Helmet Alignment by CableGuy (Print PDF) Template Painting 101 by justjoseph63 (Print PDF) Tube Stripes by CableGuy (Print PDF) Vocoder Paint Examples by CableGuy (Print PDF) Helmet Painting Tips by CableGuy Replicate the Screen-Used Look by CableGuy Hovi Tip Found Part Groundbreaking Discovery! by Dan_O and Sly11 Helmet/Bucket/Lid Interior Attach Lenses Using Sugru by justjoseph63 (Print PDF) Mounting Lenses by Solcar23 Helmet Padding by Boba_Skywalker3 Hard Hat vs Foam Helmet Liner by han_solo1 Interior Painting #1 and #2 Post by Staffa359 Truck bed-liner vs plasti-dip by TheRascalKing Helmet Fan Placement by RLH2515 What's in Your Bucket by Ragtooth Helmet Interior Build by kamikaze Helmet Internals Purchase Options by JZYL Clean frown mesh install by Toothdoc & others TrooperTalk iOS App by BrinkHouse Voice Changer Suggestions by nick007 Voice Amp System by JFarwell iComm + Aker Volume by kaa1304 iComm Help by endy iComm 3D Box Holder by Garbz Modding an iComm with External Battery by Sly11 Video Tutorials (youtube) RS Prop Masters' series Pandatrooper's series TK-4510 (Trooperbay) Password to access scruffynerfherder CableGuy's build video series Armor Building with TK1636 (forum post here) RWA's Youtube Channel How to put on Stormtrooper Armor (dressing tips) by CableGuy Stormtrooper Series by Nairy Photo References FISD Gallery LFL Archive Photos: Part #1, Part #2 538 HD Screen Grabs by dashrazor (2010) 1059 frames of TKs in ANH by Jeklynhyde (2020) Armor Cleaning, Sanding, & Shining Wetsanding and Polishing by Ensi (Print PDF) Best Way to Clean Armor by Daetrin Novus Plastic Polish by Darth Aloha Armor Yellowing Yellowing Preventative Measures by Brandon Make Aged ABS White Again by dashrazor Reversing UV Damage on TK ABS (external) Trooperbay Whitening Gel (external) Password to access scruffynerfherder Additional Yellowing Discussion and Resources Combat holster staining thigh armor: suttontech post & Daetrin post Image Posting Photography Tips for Posting by CableGuy Posting Imgur Photos 101 by justjoseph63 Post images on Imgur by Ensi **NEW** Post images on Flickr by Nairy E-11 Blaster FISD E-11 Blaster Reference (Print PDF by Blaster Team) Rubber Blasters: Hyperfirm vs. Praetorian by kman Rubber Blasters: Hellhounds (vs. Hyperfirm & Praetorian) by MaskedVengeance Another Hellhounds Props E-11 variant review by Toothdoc Hellhounds Props E-11 Review/Experience by KaiserintheHood Completion Sets for E-11 Resin Kits by T-Jay Sterling SMG & E-11 3D Print Files by trooper96 [NEW RELEVANT POSTS] Full Aluminum Parts Kit by fieldmarshall Previously Unknown E-11 Prop Detail by Joe and gmrhodes13 TroopaCoola JMC E-11 Build by CableGuy Sterling Sub-Machine Gun Diagrams / Handbook / Images by gmrhodes13 Sterling Main Spring Forming Tool by trooper96 E-11 Suppliers 2021 by gmrhodes13 How to Smooth Out a 3D Printed E-11 by justjoseph63 Gun Rack for Blasters by T-Jay ANH E-11: Sterling vs Bapty Differences by justjoseph63 Scope / Hengstler Decals by gmrhodes13 The Leia Leveller - A Mr. No-Stripes E11 Recreation by revlimiter Armor Storage/Transport TK Storage Bin by Garrett803 Husky Cog Wheel Covers by GoofTrooper Add Shelves to Husky Bin by TK21999 Husky Bin Modification by VancouverTrooper Customizing your Transport Cases by OddViking327 FISD and Stormtrooper Supplemental Posts Armor Tree History by Locitus ATA Armor History by c6dy A Sad Day for FISD by Sly11 FISD User Ranks & Awards by Harbinger Your First Troop Tips by justjoseph63 Emergency Trooping Kit by justjoseph63 Tips for Hot Weather Trooping by justjoseph63 Talk Like a Stormtrooper by Thrawndike bar Christine's PVC Mannequin by Cricket Adjustable PVC Mannequin by TK4205 Terry's Duct Tape Mannequin by pandatrooper Trading Card Holster by swagger What does your TK ID Represent? by gmrhodes13 How did you choose your TK ID? by humperdingle Story Behind Your Nickname by Snaps Re-Introductions by CableGuy Differences Between OT TKs (Post #1) & (Post #2) by sharkbait Rogue One TK vs OT TK by 11b30b4 Joseph's TK Mancave by justjoseph63 Help Fix FISD Dead Links & Photos by Sly11 Using a Torch/Flashlight to Find Armor Cracks by CallMeMrTibbles FISD Memes by Morgi Recasting What is recasting and when is it bad? by Sonnenschein TM Troopermaster recast CFO by sskunky ANH Stunt Build Threads (WIPs) ukswrath (Tony) - ANOVOS (Print PDF by harris.adp) Harbinger (Brien) - ANOVOS kman (Kalani) - ANOVOS Uxorious (Fredrik) - ANOVOS Rat (Jim) - ANOVOS Blast 'Em! (Shane) - ANOVOS unfinished ukswrath (Tony) - AM 1.0 pandatrooper (Terry) - AM LTM (Lou) - AM A.J. Hamler (A.J.) - AM (Print PDF by MV) OddViking327 (Colin) - AM 4.5 AsBlondeAsLuke (Diana) - RS Props tsongololo (Jennifer) - RS Props DudeSidious (Wayne) - RS Props unfinished Cricket (Christine) - WTF, RS Props, RS #2 (Mr.) shashachu (Sha Sha) - WTF StrmTRPR85 (Jeff) - WTF LadyInWhite - AP (google doc) Pyrates (Aaron) - AP wook1138 (Greg) - AP zv288bot (Jorge) - AP Scimitar (Eric) - AP Bud Spaklur (Matt) - AP MechaPumpkin (Danny) - AP SpiceCredits (Rick) - AP batmanmike (Mike) - AP unfinished Shinyarmour1 (C) - AP unfinished (photography) rwmead10 (Ryan) - AP unfinished MightyAtom (Mark) - AP Sly11 (Andrew) - AP Dark CMF (Tim) - TR-Mod LEGOeatPokemon (Jonas) - SDS dereferenced (Brian) - T/MC unfinished Redforce (Anthony) - NE maxsteele (Ron) - NE CableGuy (Dan) - RWA CTID (Mark) - RWA NOTE: Many of the Pre-Approval, EIB, and Centurion request threads below are for ATA armor, as that is my armor type. Threads from other makers are included for their valuable content ATA Build Threads (WIPs) ukswrath (Tony) - rebuild Ensi (Daniel) DStep (D'Angelo) echo327 (Erick) StarTrooper (Jayke) TheLorelei (Lorelei) Bazz (Adi) Quixotic5891 (Antonio) RampantLion (Leo) REAPERofDAISYS (John) Zarlon (Kyle) gmrhodes13 (Glen) wingnut65 (Jeff) pandatrooper (Terry) - MEPD TD FIVE (Noel) - MEPD TD Flykiller (Jerome) - thigh question timecyspace (Clay) - unfinished MaskedVengeance (Caleb) - unfinished (Print PDF) Pre-Approval Requests Actionsdower (Jim) - RS iEmpire916 (William) - AP husky68 (Robert) - AP TKModder421 (Greg) - ANOVOS Jared (Jared) - ATA REN2100 (Ryan) - ATA Hotel (Jim) - ATA MissingNo (Peter) - ATA echo327 (Erick) - ATA 31-9 (Jayson) - ATA unfinished snipedoc2001 (Cody) - ATA Swarzo (Cory) - ATA unfinished Cesarisamisfit (Cesar) - ATA unfinished EI & Centurion Informational Threads Advanced Tactics: EIB and Centurion by justjoseph63 ANH Stunt EI Visual Checklist by Sly11 and Wingnut65 ANH Stunt EI Photo Submission Guidelines by justjoseph63 (PDF by Sly11) Multiple EIB Award Recipients by gmrhodes13 Expert Infantry Honor Gallery by gmrhodes13 ANH Stunt Centurion Visual Checklist by Sly11 and Wingnut65 ANH Stunt Centurion Photo Submission Guidelines by justjoseph63 (PDF by Sly11) EI Requests TKittell (Robert) - 100 AM Dargas (Richard) - 163 ATA gmrhodes13 (Glen) - 291 ATA Boba_Skywalker3 (Dominic) - 310 ATA TK6682 (Michael) - 337 RS Props Warwitch (Gabriel) - 340 TE2 EnemyZero (Tom) - 355 ATA ukswrath (Tony) - 435 ATA sylverbard (Mark) - 456 ATA YESSRAM (Yessid) - 465 ATA CrookKnight (Shawn) - 638 AP Cricket (Christine) - 700 RS Props TheRascalKing (Justin) - 807 ANOVOS Wargasm (Joshua) - 810 ATA lucnak (Luc) - 815 ATA Jared (Jared) - 841 ATA TK 71627 (Jose) - 850 WTF REAPERofDAISYS (John) - 944 ATA echo327 (Erick) - 948 ATA equuspolo (Ardeshir) - YR2019 ANOVOS Ruffalo - 949 RS Props husky68 (Robert) - 953 AP revlimiter (Adam) - 1037 AP benthemonkey (Ben) - 1044 RS Props Starkiller (Marek) - 1047 Anovos Nairy (Jonatan) - 1051 RS Props (also Hero) Doggydoc (Gerald) - 1052 AP MaskedVengeance (Caleb) - 1055 ATA Centurion Requests gazmosis (Steve) - 32 ATA Solcar23 (Carlos) - 52 ATA JEDISTAR (Charlie) - 60 ATA niugnep (David) - 76 AP piklz36 (David) - 86 ATA Jancelot (Chris) - 92 AP Techne (Chris) - 108 ATA RampantLion (Leonard) - 115 ATA Vader's Wingman (Jason) - 123 ATA ukswrath (Tony) - 144 ATA DarkOrder66 (Christopher) - 160 ATA YESSRAM (Yessid) - 165 ATA justjoseph63 (Joseph) - 167 AM2.0/ATA Squimspickle (Aaron) - 213 ATA Cricket (Christine) - 316 RS Props Daetrin (Paul) - 326 TM Soulart (Teresa) - 335 AP jamihal (Jim) - 344 ATA Ruthar (Taylor) - 354 ATA TheRascalKing (Justin) - 396 ANOVOS menschie (Colin) - 404 ATA Scimitar (Eric) - 425 AP (photography) Bazz (Adi) - 436 ATA MissionTrooper (Andrew) - 454 AP Ruffalo - 457 RS Props OddViking327 (Colin) - 485 AM MightyAtom (Mark) - 488 AP (photography) revlimiter (Adam) - 508 AP MaskedVengeance (Caleb) - 522 ATA Purchase Options (my build) Armor and helmet: Affordable Trooper Armor (ATA) Undersuit: Trooperbay One-Piece Double-Zipper (courtesy of a GA Garrison mate) Password to access scruffynerfherder Boots: Imperial Boots 421 (NAME CHANGE: KeepTrooping) Gloves: See hand guards below. (mine) Hand Guards: justjoseph63's kit [NO LONGER AVAILABLE] Strapping: TheRascalKing's kit Holster: Darman's 8oz leather (tan straps) Neck Seal: Darman's Premium (zipper) Belt: TKitell's Imperial Issue TD Hooks: ukswrath's kit Mounting Hardware: justjoseph63's kit Hovi Tip Screen/Mesh: ukswrath's kit Helmet Fans: ukswrath's Cooling Kits by ukswrath (Etsy) Voice Mod/Amp: iComm + Aker amp Blaster: Hellhounds Props E-11 Alternative Accessory Options: TrooperTronix Helmet Fans Henry's Helmet Fans DIY Neck Seal by BrinkHouse Making a TK Neck Seal by Doggydoc Geeky Pink's Neck Seals Making a TK Neck Seal by Doggydoc Also see Joseph's Soft Parts List above Other External Resources Ukswrath's Website Less Intimidating Build by imperialbrewer TK41973 Blog Tony Barnett TK300 Website (snaps) | FISD wordmark used with Command Staff permission |

Hey boys and girls, i forgot to join the FISD for three years... Now I am here and want to check the level 2 option and all other things for the "shiny" white guys! Greetings from duesseldorf in germany :) Leif

Looking better, although I think you are still too close at the elbows, biceps are just about to come out (or will do with movement) under your shoulder bells). I would increase the gap at the elbows and bring the biceps up, you will thank me when you start trooping and waving your arms around References show no large tabs on the back of shoulder straps BUT also check how many tabs you have on the front, usually it's one large and 4 to 5 small tabs, although not in the CRL. TD could come down on the belt too, you may achieve this by bending downwards on the clips Also when taking photos just watch the drop box positions and sides abdomen/kidney, should be level Also for higher levels the corners of the plastic belt angles should meet the fabric belt The corners of the plastic ammo belt shall be trimmed at a 45 degree angle that that meets the outer edge of the cloth belt.

Good to know! Thanks! Sent from my iPhone using Tapatalk

Brother you and the DO’s are awesome and the input from everyone else here has been amazing. No disrespect was ever taken and that’s why I wanted to make it clear. As well even the D Ring. It’s not about the D Ring at all. Everyone here is amazing. It’s just the way the system is set up and I think has overtime been misinterpreted and perhaps evolving. It’s not about the outfit I want or bending the rules to accommodate anyone, especially me. I am a student and a respectful observer to much greater experience here than mine. but that’s not to say my experience and as well knowledge is in anyway slight or I’ll informed and I make mistakes. And for that I always apologize or respect the corrections eagerly. but to simply reject Star Wars and what is on screen or what all of a sudden is decided it is not acceptable when in clear site it is, seems a bit out of touch with what the goal is. Screen accurate, let me emphasize screen accurate and not necessarily a dictate. And I respect authority very much. That’s why I said if it doesn’t meet it then I withdraw it. But it is screen accurate. Let me make it clear. black is accurate. White is accurate. But for me to change it for the sake of meeting a requirement that arbitrarily decide we accept the white and not the black is simply wrong. I could argue that the black ring and angled are more accurate because they have appeared across three movies and that the ones that are round were quick adjustments for the new film because rhey ran short or was a quick fix on set or anything else could be made. it is pure and simple and FISD has always said we need screen references. It’s not about sitting in judgment. I can make that change very very easily. Have you asked why I am not? I can make two but caps and replace it for the approval and put it back to what I like after. Have you guys asked why I won’t. God knows look at all the stuff I’ve built. So why not this? And I have always made almost all of the adjustments if not all that are requested. But why not this one. Because at some point I have a principle I want to stand on. I feel that at some point you have to just say “come on”. Especially when it is clearly displayed. how are these not valid valid valid screen examples from very prominent and famous scenes. How are these discarded? Is it just to make things difficult on people or just someone deciding well my judgment is more important than the movie. and even based on these if you approve I am not so sure I will continue. I’m in the process of making a screen accurate F-11D and not sure I will post that. What’s the point and purpose. Seems to be nothing at some point but just a headache. and I’m not saying I have or should have free rein. Quite the opposite. I believe in the right standards. But they can’t be arbitrary. I accept this but not that, I like this and not that. This is acceptable on screen and this is not. a perfect example was rhe ridiculous discussion regarding the HWT. I kept my mouth shut but it upset a lot and I mean a lot of people. And not only did I supply the actual crl photos to FISD but those were the very photos approved by everyone on kenobi. Higher ups. We have crls for costumes that are blurrs in our world or old graphics. Here you had a clear cut example of a FISD approved costume modified and rhen deborah chiw appeoved and Doug appeoved. Made it on screen. And there is just an arbitrary, no. Now people are building their own HWT that matches it. And after their approvals making the kids. it just comes across wrong and it seems to many many many as petty. So it’s hard to not get discouraged and think that it might have a bit of personal animosity or agenda set out. Afain I have always been treated with respect and have always afforded everyone here the highest respect. I am just voicing a principle and it’s no one’s burden to accept. But I also have mine that not only do I think keep my best interest in mind but also advance rhe interests of FISD not hurt it.

Hi David, Glad you've received your FO armor kit. (better now than ever ) . I would recommend you to take a look to this section , review the build TLJ build threads some troopers have recently started. Open your own build thread , post photos ask questions. Remember, "measure twice, cut and glue just once" https://www.whitearmor.net/forum/forum/195-tlj-build-threads/ This one is a very useful index

Since I recently shared this meme: Here's some appreciation for all the Memes everywhere

Been waiting to see feedback on these. Rare I wear my Imperial Gaskets rubber ones, they are restrictive and build up a lot of heat, no air transfer, I now only wear them for LFL or high profile troops, fabric is way more comfortable in my opinion. Looking forward to see how much movement you have once you have the kit all fitted.

Rubber gaskets arrived today from Thorsson and Associates Workshop. ‘They are well made and backed with neoprene, so they may not be too uncomfortable.

Thank you so much, sir

Hope your build is coming along. Just wanted to mention that using fabric with stretch didn’t work all that well, atleast not for me so I ended up sewing the zipper straight to the velcro and that gave a much better connection

This also makes me VERY happy to see.