darthcue[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 7 minutes ago, Par_ said: Meh, maybe they did something different. We never know. maybe it is like this: 1 Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 For the above, please see the CRL again. There was a typo that prevented you seeing the L2/L3. Under Suit Level 2 has a typo on the word "rib-knit"I think my Level 3 suggestion should be submitted; "Stitching shall be present between the ribs of the rib-knit fabric."Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 Here's the best image I got. I unfortunately didn't get to making a holster, but I reckone one could make one out of nylon strapping with a snap attached to the exterior of it. 1 Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 (edited) 4 minutes ago, darthcue said: maybe it is like this: That's actually not a bad idea. That could be a good way to carry the baton. Edited October 13, 2017 by Par_ 1 Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted October 13, 2017 Report Share Posted October 13, 2017 5 minutes ago, SlyFox740 said: Under Suit Level 2 has a typo on the word "rib-knit" I think my Level 3 suggestion should be submitted; "Stitching shall be present between the ribs of the rib-knit fabric." Sent from my iPhone using Tapatalk Both fixed. Good call. Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 7 minutes ago, Daetrin said: Both fixed. Good call. Oh it looks like you fixed the "knit" part of the word, but the word "Rib" is still spelled incorrectly. Also I'm working on photoshopping the E-11 images and combining them into one for you as we speak. Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 Hey Slyfox, would you be able to photoshop the riot baton pic for us? I don't have a program to do so. Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 1 hour ago, Daetrin said: Henry - if you are going to photoshop the shadow on the blaster, can you please combine the 2 in to one image? Then I can simply upload it direct? Okay Paul I think this should be okay for the Rogue One E-11 CRL image, let me know if there's anything else you'd like me to fix. I can email you the fullsize image or you can download it in full resolution from my photo gallery here: https://imgur.com/WvQ0NQ4 Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 20 minutes ago, Par_ said: Hey Slyfox, would you be able to photoshop the riot baton pic for us? I don't have a program to do so. Okay give me a bit and I will work on that for you. 1 Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted October 13, 2017 Report Share Posted October 13, 2017 4 minutes ago, SlyFox740 said: Okay Paul I think this should be okay for the Rogue One E-11 CRL image, let me know if there's anything else you'd like me to fix. I can email you the fullsize image or you can download it in full resolution from my photo gallery here: https://imgur.com/WvQ0NQ4 Fixed! Damn, your fast. Also fixed the typo. Now we just need the DLT-19 with the sling, etc. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted October 13, 2017 Report Share Posted October 13, 2017 7 hours ago, Daetrin said: Fixed! Damn, your fast. Also fixed the typo. Now we just need the DLT-19 with the sling, etc. SMOKIN! Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 (edited) On 10/8/2017 at 11:36 PM, gmrhodes13 said: I updated my DLT-19 a while back from that image Can you take a higher quality image of this DLT-19 Blaster? This one is not very high resolution. 14 hours ago, Par_ said: Hey Slyfox, would you be able to photoshop the riot baton pic for us? I don't have a program to do so. Ok, so I have photoshopped the Baton onto a white background. As you can see from what we can tell in the movie the baton holster appears to have a simple flap design making the holster slightly wider at the top, so that's what I have shown in the CRL image. It shall be on the wearer's left side, and I believe it should be made of either black canvas or black leather similar to the Death Trooper accessory pouches, but that's just my opinion. 13 hours ago, Daetrin said: Fixed! Damn, your fast. Also fixed the typo. Now we just need the DLT-19 with the sling, etc. Ok Paul here's the CRL images for the Baton and the DLT-19 Heavy Blaster Rifle, let me know if this is okay with the holster on the TK belt included in the image like this. Also the DLT-19 image is not very high resolution at all but I did the best I could with what I have, If I could get a higher resolution version photo of the blaster that would be great! https://imgur.com/IfI4rpz https://imgur.com/u6Yf8Lw Edited October 13, 2017 by SlyFox740 Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 Dude that looks great! Thank you very much for that! 1 Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 13, 2017 Report Share Posted October 13, 2017 (edited) Dude that looks great! Thank you very much for that! Oh you're very welcome. It's my pleasure! I still feel the Crystal Patrol Duty TK Pack should be included as an optional accessory in this CRL and kept as part of our detachment as all the research and leg work was done here at the FISD; https://www.whitearmor.net/forum/topic/39073-celebration-europe-2016-rogue-one-stormtrooper-back-pack-build/. I'd much rather see the backpack as an optional accessory in this CRL than a required costume component on a "Jedha Trooper" CRL which is a non-existent character title only coined on the packaging of one action figure! First of all the backpack is seen at the Kafrene Trading Outpost in one of the opening scenes of the movie before we even see the planet Jedha! This makes sense as the Empire would be looking to confiscate any kyber crystals being illegally sold on the market at the nearby trading outpost in order to be sent to Edau and refined into fuel for their super weapon. All of this coincides with the official Rogue One Visual Guide from Disney/Lucasfilm as well which I believe is much more of an "official" reference than a single action figure that says "Jedha Trooper" on the packaging. And as I stated before the visual guide clearly states in black and white that the backpack is issued to "standard stormtroopers" assigned to "crystal patrol duty" and that the Pauldron "denotes rank or mission specialization". But I digress, if the backpack must be part of another detachment, then MEPD is due for a major name change somehow related to "Mission Specialists" as all the new costumes they will be getting are never seen anywhere near Tatooine let alone Mos Eisley! Plus I highly doubt that the Empire would permanently dedicate an entire detachment of the 501st legion to one single remote location such as the Mos Eisley space port, would they really want to establish an actual police dept. in such a "wretched hive of scum and villainy"? It's possible I guess but I think a "Mission Specialists" type name would be much more fitting for Sandtroopers ready for deployment onto any possible sand planet they may be assigned to, like the battle of Jakku or Jedha. Not JUST Tatooine! This type of name would make more sense when adding HWT and other costumes to the detachment. Something like S.E.S.D.(Sand Environment Specialist Detachment) might work well too as it could be argued all of their costumes will be "weathered" to some degree, though as far as the Crystal Patrol Backpack goes it has been clearly seen on clean troopers too so there is still my argument that it belongs here. As it's clearly NOT a Sandtrooper pack meant for sand environments, it is however a pack designed for a "specific mission" so it would fit into a detachment of that description but not one designated for Sandtroopers specifically. Same goes for the HWT, it could fit into a "Mission Specialist" type detachment but not a "Sand Environment" type detachment. At the end of the day, we know all Backpacks are designed for a specific type of mission or environment. And according to Lucasfim/Disney the Shoulder Pauldron "denotes rank or mission specialization". So I think something to do with "Mission Specialist" would be the most appropriate in this situation. Edited October 13, 2017 by SlyFox740 Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted October 13, 2017 Report Share Posted October 13, 2017 FYI, I'll hop on this tonight. Heads down at work today. Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted October 13, 2017 Report Share Posted October 13, 2017 6 hours ago, SlyFox740 said: Can you take a higher quality image of this DLT-19 Blaster? This one is not very high resolution. Only other photo I have handy, I have leant the blaster to a fellow member, once I get it back I will take some more. Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted October 14, 2017 Report Share Posted October 14, 2017 9 hours ago, SlyFox740 said: Can you take a higher quality image of this DLT-19 Blaster? This one is not very high resolution. Ok, so I have photoshopped the Baton onto a white background. As you can see from what we can tell in the movie the baton holster appears to have a simple flap design making the holster slightly wider at the top, so that's what I have shown in the CRL image. It shall be on the wearer's left side, and I believe it should be made of either black canvas or black leather similar to the Death Trooper accessory pouches, but that's just my opinion. Ok Paul here's the CRL images for the Baton and the DLT-19 Heavy Blaster Rifle, let me know if this is okay with the holster on the TK belt included in the image like this. Also the DLT-19 image is not very high resolution at all but I did the best I could with what I have, If I could get a higher resolution version photo of the blaster that would be great! https://imgur.com/IfI4rpz https://imgur.com/u6Yf8Lw Sweet! This is posted. I'm flexible on the language if someone can provide a better description for the baton/holster. Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 15, 2017 Report Share Posted October 15, 2017 (edited) Add we can: Baton: -Is attached to the holster, with the striking end pointed upwards, while the handle section is pointed down. -Holster will not be elaborate, but rather, a simple yet secure design. -Chrome finished or shining objects of any sorts will not be present on either baton or holster. -Holster is located at the very end of the rear belt section, where the front belt section meets. Also to answer the question why the baton would have a cubic striking section to begin with, I believe it shares a similar design to the Imperial Ground Crew wands, which have rectangular sections, with a spherical handle, like the baton. However, this design for a riot baton still is beyond me, maybe if someone has a blu-ray HD shot of this scene, and could brighten the shot? Edited October 15, 2017 by Par_ Quote Link to comment Share on other sites More sharing options...
Bulldog44[TK] Posted October 15, 2017 Report Share Posted October 15, 2017 (edited) Sorry if this was discussed before but did the prop makers for the R1 E-11 cast copies of the Doopy scope? The scope looks like the same one,#3 1943 style M38.dont have any high detailed pics to see the serial number. Just curious. If so, it makes it easy for blaster builders to just acquire a doopy scope to reach further screen accuracy. Or at least a copy of a #3 1943 M38 scope. If the scope is a casted copy then would L3 level be better to state the scope should be copy of a real 1943 M38 scope? From the photos I have seen and screenshots, the scope appears to be just a plastic copy on all the blasters. Again, just asking and seeing what you all think or know on this. Edited October 15, 2017 by Bulldog44 Quote Link to comment Share on other sites More sharing options...
Parquette[TK] Posted October 15, 2017 Report Share Posted October 15, 2017 On 10/11/2017 at 7:02 PM, Par_ said: Here's a good image Gmrmodes. Gmrmodes, you were talking about not beind able to flip an image because it wasn't absolutely straight. Here's one, would you be able to work with this one? I think we need this split in half, and then you can mirror the same side onto the other, then vice versa. That way we see both eye's and their symmetry. Quote Link to comment Share on other sites More sharing options...
Bulldog44[TK] Posted October 15, 2017 Report Share Posted October 15, 2017 Sorry, I just found the reference pic in Henry’s research, it is a copy of the doopy scope. Quote Link to comment Share on other sites More sharing options...
SlyFox740[TK] Posted October 15, 2017 Report Share Posted October 15, 2017 Yes and if you read the CRL requirements level 3 says "Scope shall be a real or replica 1943 M38" Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Spero Posted October 15, 2017 Report Share Posted October 15, 2017 Great to see the CRL up and running for the TK. I read that there are armor and helmet kits available for sale now. Who makes them? Quote Link to comment Share on other sites More sharing options...
Daetrin[Admin] Posted October 15, 2017 Report Share Posted October 15, 2017 I'll have that info on the where to buy armor thread soon, later tonight. I have to confirm if he wants to be contacted via PM or email. 2 Quote Link to comment Share on other sites More sharing options...
Darth Cheez Wiz Posted October 15, 2017 Report Share Posted October 15, 2017 30 minutes ago, Daetrin said: I'll have that info on the where to buy armor thread soon, later tonight. I have to confirm if he wants to be contacted via PM or email. Yes, please. I second that. Aloha from the Pacific Outpost. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.