Jump to content

Novak Dimon

Imperial Attaché[TK]
  • Content Count

    671
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Novak Dimon

  1. Hello Sascha, nice work with your mod! Did you made the ab-buttons yourself? I would suggest to cut the ab where you are showing and then make the lower part slimmer: Are you going to mod a complete set of armor or just the most noticeable parts? Grüße aus Jever! Christian
  2. Hello and welcome to the home of white shiny armor. <br> That's a great picture of you! Thanks for sharing it with us! <br> Good luck with your build , and if there are any questions please ask! <br> Cheers Christian
  3. Hi Steven, welcome to the white zone!
  4. Hi comrades, I met David at the ComicCon in Hannover and had the chance to have a look at the armor personally. When I saw the first pictures of the armor one year ago I said: better don't buy this armor ... but what I saw last saturday was definitely an improved version. Sure it has some issues. Some details are not as sharp as I would love to see them, and some details are not the common way but I totally agree with Mike (TK-41576) that the armor is absolutely ok for the price of only 300$. (You buy one for 600$ and get one for free). David is a nice person and I talked a l
  5. Hi comrades, I met David at the ComicCon in Hannover and had the chance to have a look at the armor personally. When I saw the first pictures of the armor one year ago I said: better don't buy this armor ... but what I saw last saturday was definitely an improved version. Sure it has some issues. Some details are not as sharp as I would love to see them, and some details are not the common way but I totally agree with Mike (TK-41576) that the armor is absolutely ok for the price of only 300$. (You buy one for 600$ and get one for free). David is a nice person and I talked a l
  6. Hi Jason, welcome to the FISD. Do you decided what type of TK you want to make? If you have look into the "Advanced Tactics Area" you can easily compare the different kits AND see how great a well built kit can look. <br> Best regards!<br> Christian
  7. Good work so far. I wish you a steady hand for the painting.
  8. Hi Eric, welcome to the FISD! Don't miss Ukswraths TK Build . It is the best build thread I've ever seen. Greetings Christian
  9. Hi Matt, welcome to the FISD and all the best for your approval!
  10. Hi Matt, welcome to the FISD! This is truly the right place to start your journey to become a TK! For the beginning take a look into the "Getting Started" section. A great guideline for armor buying is THIS topic. There you find a list of vetted armor makers and descriptions about them. HERE at the other hand you find information about what to avoid when buying armor. To get an idea how to build an armor take a look into the ANH-Section of the Costuming and Builds. There you find tons of information about what you need to build your armor. And don't miss the Advanced Tactics Secti
  11. Hi Rob, the best way to find the right size for the parts is to try it out. They should fit comfortably but not too loose. Use some painters tape to pre assemble the parts for fitting. You should start with the front of the forearm. The width of the cover stripe should define how you trim the front butt connection. Then measure how much trimming is necessary at the back. It makes sense to trim equally at both sides of the parts to get a consistent look of the forearms. Generally it is easier to fit the parts without the cover stripes. If you need to trim the part you have to remove them anyw
  12. Putting some foam under the Speaker is looking like a good idea. I'll try that with my Aker!
  13. Hi Kevin, great work with your shims! I can only spot the veery small gap at the upper and lower ridges of the left side. But again: great job!<br> Cheers Christian
  14. Thank you for sharing this mail, Joseph. I agree to 100 percent!
  15. Hi Shaun, welcome to the white zone! Generally the SDS armor is ok. But as mentioned before there is some work needed to make it ready to join the Legion though. BUT the price of this shop is ridiculous high!! You may find this armor from time to time for around 500EUR (740AUD) at Amazon in Europe. But for 1870 AUD you will find a much better kit from one of the vetted makers!<br> As stated before: take your time for thorough research before ordering anything and ask all the questions you have. It will save you a lot of your hard earned money! <br> Best regards!<br> Chris
  16. Hi Henry, welcome to the FISD!<br> Best thing is to start a build thread with pictures of the questioned areas. That will make it much easier to help you. <br> Cheers <br> Christian
  17. Welcome to the FISD Robert and Congratulations to your kit. You're a lucky man! <br> Good luck with your build! <br> Cheers <br> Christian
  18. Hell Jude, welcome to the FISD! Congratulations to your armor! I know how you feel while waiting for it. <br> Have a look around the boards. You will find almost every information you need to finish your project!<br> All the best!<br> Christian
  19. Hi David welcome to the white zone! Joining the FISD is your first step into a great new world.
  20. Hi Bobby, welcome to the white zone!<br> Best regards!<br> Christian
  21. Contact the Anovos customer support and tell them that you need new parts. It's possible that they offer to send replacement parts if you can proof that yours are destroyed. <br> That happened when I messed up my bucket and asked if it is possible to buy replacement parts. <br> Good luck!<br> Cheers Christian
  22. I too wish happy Easter to everyone from a short trip to Fort Augustus in Scotland!
  23. Hi Hans Jürgen, welcome to the white zone. As Felix stated above, you have to decide what type of armor you want to build. The first step is research. Check the "Getting Started " section first. There you find vital information for your first steps to become a TK. You find the most important threads translated to German in the German Section of the board. It is also interesting to read some build threads and have a look at the "Advanced Tactics" area. There you get an idea of how accurate an armor can be made. If there are any questions please feel free to ask no matter what it is. W
×
×
  • Create New...