gmrhodes13

Kit a "slight change" is still a change, hence why I posted the comparison which I was asked to do by Paul our Detachment Leader.

Sure Kit I'm not denying you have put your armor together and trooped first but we are discussing the changes for the CRL and what is different between the TFA and TLJ troopers, the cod is just one of those things which has obviously changed.

The discussion of a difference in the cod has come up a few times on FISD, perhaps before you joined. 1) the FOTK codpiece entry doesn’t specify specifics with regards to shape “ Codpiece For 501st approval: The codpeice sits below the abdomen and under the belt. “ Correct it doesn't mention specifics in regards to the shape a lot of CRL descriptions don't that's why they come with an image which clearly shows a different in design to the TLJ cod as I have provided. If CRL's contained all the info with every detail of a specified piece it would end up a novel. 2) if we count slight changes in shape, how do we account for slight changes in shapes in all parts from one maker to another.. some makers would actually have parts that are curvier or straighter or shorter or longer than other makers Even the different makes of armor do look similar to what is seen on screen. 3) some toys (if not all) retained the cod piece shape, in my opinion, because Disney or Lucas didn't exactly specify that there's a change in cod piece shape for the this specific character/toy design We are replicating a character from a movie, what happens with toy reproduction isn't necessarily 100% correct, as we have seen with many versions of the Executioner with incorrect paint details. 4) if you ask me, its a bit impractical for troopers to have an extra cod piece shipped with this very slight change Why other pieces have been needed, ie the helmet as clearly that was different as is the codpiece.

Can't go wrong with the boots, really comfortable and durable. Another few pieces to the puzzle

Looking forward to seeing how these turn out

Looking forward to the progress good luck

TDK's is mentioned in Clint's helmet comparison thread https://www.whitearmor.net/forum/topic/42616-tlj-helmet-comparison/?page=2

8. Codpiece Thought I best point out the codpiece is different too, if you compare to the width on the belt you will notice it is a lot narrower, also it is angled outwards from the cup.

The codpiece is different too, if you compare to the width on the belt you will notice it is a lot narrower, also it is angled outwards from the cup.

In a fix I've seen some use plastic signs from the hardware. Really depends what colour you have, whether it will match or not. Normally I would suggest contacting the armor maker directly and enquire about getting some as it will match the armor you have

I have heard of the freezer trick before, sounds like it has worked for some. Also soaking in a warm bath of very salty water has had some success. Good luck, hope you have luck.

Hello and welcome aboard, there is also Mimmic on the RPF (replica prop forum) with armor underway, apparently a helmet on the horizon too. Lots of build threads on the forums so have a good look through them, compare what the armor is like with another and your size and decide from there. Good luck and hope to see a build thread soon.

The inward seam should be as it is clearly there but not the overlap, that would be for L2 L3 in my opinion

So really the bicep shouldn't either

In the LMO forum by me as I'm the GML, as per link I already sent in PM to you https://www.501st.com/forum/viewtopic.php?f=7&t=95427&start=60

You could also adjust the wording to the thighs as the biceps as in the new TLJ images you can see overlaps Thighs For 501st approval: - There is a seam on the outside of the thighs - There is a seam or an overlap on the inside of the thighs - A clip greeblie is present high and across the outside seams of each thigh. - The right outside thigh (to the wearer) includes a base for a holster.

I also submitted mine for approval

Yes I already submitted the CRL draft for Executioner some time ago

Many thanks Walter

Coming along nicely

I'm sure with what you have in hand it will keep you busy Looking forward to the progress

Already posted the second one 2 posts up, cod placement is awesome

Congratulants and welcome to the ranks trooper

Correct the bridges is between the front and back of the shoulders. Just thought I should mention there are a couple of different elastics, a general thin elastic and a more robust industrial thicker elastic. You really want to use the thicker type so it is harder to stretch.

Coming along nicely, you'll be at the end in no time