TKSpartan

Congratulations Jonas!! Welcome to the ranks

Hi Mitch, you may want to take a look to this video, it was so useful to me when sizing my thigs.

Hi Chris. this iamge may help you. for ANH Higher levels the crl states : Fall of tube stripe tops ideally lean toward the front. and Ideally, the tube stripes are positioned approximately a pencil width from the side of the cheek.

Welcome aboard Chris, we are here to help.

Welcome to FISD Trooper !! Great Shot

Welcome to the Legion Trooper. Enjoy being a Bad Guy Doing Good.

Hola Lluis , las nuevas fotos se ven muy bien, pero revisando mas detalladamente con el D.O. Team, hay varios puntos que corregir para que estés listo. Hi Lluis, the updated photos looks great, but looking in detail with the D.O. team, there are some points to fix and you're golden : 1- Entre los requisitos para Centurion indicados en tu aplicación de EIB se solicitaron ajustes de pintura en varias zonas del casco: In your EIB app some paint fixes to your helmet were pointed as Centurion requirements Las líneas re rango deben ser más gruesas y definidas The rank lines should be thicker and well defined References Los lagrimales fueron corregidos y el grosor esta bien pero las líneas se ven muy irregulares por lo que es necesario definirla más The tear lines were corrected but the lines look very irregular so it is necessary to define it a bit References El vocoder se ve mucho mejor pero al igual que los puntos anteriores es necesario refinar algunas zonas , indicadas con las flechas. The vocoder looks much better but like the previous points it is necessary to refine some areas, indicated by the arrows. Acerca de tus campanas de hombro , es necesario hacer un pequeño recorte en las esquinas para que no se metan demasiado en la armadura pectoral. Your shoulder bells are behind your chest plate quite a lot, you may want to trim a little of extra material Reference Otro ajuste rápido es que quites los elásticos de la parte del frente de los puentes de hombro , solamente se requieren los posteriores. Another quick fix is to remove the two additional elastic on the front of your shoulder bridges, just the rear are required. Reference Es requerido que alargues los elásticos que unen los biceps y los antebrazos de manera que estos bajen un poco mas cerca de las muñecas. It's required to lengthen the elastics that join the biceps and forearms so that they drop a little closer to the wrists. Reference Finalmente, aun hay un espacio entre tu placa abdominal y la lumbar y deben alinearse . Finally, there's still a gap between your Ab/Kidney connection that needs to be addressed Reference Son varios detalles pero estamos seguros de que puedes con ellos , déjanos saber si podemos ayudarte en algo. Certainly, it seems to be a lot of work ahead, but we are confident that you can deal with it , let's us know if we can help you. Estás a solo unos pasos Lluis!!!

Hi Jonas, you can leave then as it, but if you want a more clean application it's not problem to remove the old ones and replace. cheers

Hi Scott, Glad to see another TK Commander aiming for high levels . I have added your app to the processing line, one of us will be with you shortly, meanwhile, you may want to check the following TK Commander Centurion App , (That we hope you go for the highest level too), to have and idea of common issues.

Super Fast, Great!!! Added to the processing line . One of us will be with you shortly.

Hi Josh . Glad to see your Centurion APP, before we can start you review, there's Just one detail: Could you please post the photos with a larger size? most of then are too short to see in detail. If you look at your EIB app, they have the correct size. Thanks in advance Trooper .

Thank you Justin, so fast !

Late to the party, I was doing the homework and looking for info about. Agree that, since only the palm is textured, (that most of the time is hidden), they have no problem to me.

Thank you Justin. we are almost finish mate, just this easy fix for you and ready. We'll need you to remove the excess black paint from the gums Reference Images Thank you Trooper !!

Hi Justin. I'm not sure if it's a sunlight effect but Could you please add a close photo of your helmet's frown with a different light source.? I would like to be sure the black paint doesn't leave the gums as the crl for basic states: Frown is painted black and does not leave the teeth area Thank you mate!! Reference Images

Hi, Welcome to FISD.

Excelente Lluis, muchas gracias!. Great Lluis , Thank you . !!

Thank you Kaden. Sha Sha will be with your review shortly.

Hi Michael, thank you for your EIB app. One of us will be with you shortly. I have added to the processing line.

Good luck Craig, looking forward for your TK ID

Hi KC Could you please add a close photo of : 1-your helmet's Frown? jus to be sure that you have the correct shape and it's just a light effect. 2- Close photo of your thigh ammo pack inside, both sides, to check the rivets type. Thank you Trooper !!

Hi James. Before one of us can process your EIB app, there are some fixes we need you to address. 1- CRL for Basic level : Frown is painted gray and does not leave the teeth area. .. As Glen pointed out above, you'll need to remove a bit of the grey paint from your teeth, as they're leaving out onto the gums area and paint the edges corners. A paint remover (Non Acetone) can be used, in my case I have used a pointed or sharp tool like cutter or knife to do it also) Reference images 2- CRL foe Level 2 : Correct Aerators/Hovi-MIX tips are present. Screens used shall be of a wide type mesh, with the rim of the mic and the inside white or painted white. This is a common issue of the Anovos Helmets. Reference Images Personally what I have done several times to fix this is as follows. A- Remove the mesh from tips . I have used knife, screwdriver and plier. B- look for a strainer with the proper mesh C- Use a permanent marker top and a rubber hammer to give the shape to the mesh. D- Paint the hovi tips inside and rim with white acrylic and cut the mesh with a minimal edge. E- Place the mesh into the tip carefully and reassemble to the helmet. 3- CRL for Basic Level : ... The cover strip edge shall be facing the inside of the leg. Finally , it looks like you right shim cover strip is closing facing outside of the leg. You will need to disassemble and re-glue it to the correct position. This could be a bit challenging and take more time but we are confident you can achieve it . Reference Images We'll be ready when you're ready.

Hi Lucas, Welcome to FISD. Great story, thanks for sharing. Let us know how we can help. here in the FISD our motto "Troopers Helping Troopers " lead us every day.

Hi Kaden, thank you for your EIB app. I have added to the processing line. In order to continue with your review, a couple of easy fixes are necessary : 1- CRL for Basic level : Frown is painted gray and does not leave the teeth area. .. As Glen pointed out above, you'll need to remove a bit of the grey paint from your teeth, as they're leaving out onto the gums area and paint the edges corners. Reference Images 2- Crl for Basic Level: The abdomen armor has a button area that matches the color pattern shown (3 blue + 6 gray)... Your Ab Buttons looks more into the Shade of Black and dark gray, we are asking to change to the correct paint that best matches the Blue and gray showed in the references. Reference Images And finally, could you please add the following : Close up of sniper plate front and left side. Looking forward for your updates. Cheers.

Looks like Justin TK-rate king Added to the processing machine .