TKSpartan

Hi Mark, It would be so helpful if you can post some photos of you in armor to see the complete scene so we can give you some feedback and the appropriate response . Cheers

looking like a good start. !

Looking Great Ian, congratulations and good luck with your approval!!

Hi Kaden, As Glen pointed, we're processing your app. thanks for your patience . Cheers

Hi Adam, what I usually do for the curved sections, mainly for the forearms is to add a piece of wood, ( you can use other material that is firm (, along the cover strips (outside and inside) and clamp it. let dry for 48 hours. hope this can help.

Congratulations Trooper , Welcome to the ranks !!

Hi David. as Mathias pointed, shortening the elastic should do de trick, looking at your photo it looks like the snap is located a bit down into the bell, you may want to check this out according to the following references. let us know if need further assistance

Hi Ruben, welcome to FISD. cool shot! Hola Ruben, bienvenido al FISD . Qué buena foto!!

Cool Mark, asked just to confirm. thanks !!

just a question, are those rivets 8mm diameter?

Good work Trooper!!

almost there !!!

Hi Marc, welcome to FISD, looking forward for your arrival photos, don't worry for your english, It really good !!

Hi Ryan, as Glen pointed for higher levels (even basic) , it's too important to check the gallery . The crls states : Text descriptions are only one part of the guideline. GML's and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume. When giving advices , tips and reviewing EIB and Centurion level apps, we consider both CRL and Reference Images. About your ammo pack rivets , your measures looks ok, you can mark 5mm down and 10mm across and see haow the mark looks acording to the references. Keep on doing a great work !!

Hi , IMO it looks great, if the left side if the same , you're golden mate!! great work.

Looking Great, easy pass !!!

Hi Micheal, great set of armor, congratulations! A couple of details I could see, that I'm sure you can deal with and will give you a better look. A- You may want to level your biceps a bit, (most goes under the inner elastic in the shoulder bells), this will let the forearms go up too and look better Reference Images B- you could bring your ab belt up a bit to sit at or just above the bottom of the central and vertical abdomen button panels, and finally you could spin a half inch to the left to center it (green line) Reference Images Cheers

Congratulations Trooper !! Welcome to the ranks

Hi, You may want to check this Anovos Build .

Awesome work mate. your Helmet interior looks screen accurate and your overall looks great. for the sniper knee I think it looks good and L3 approvable as it. keep it up !!

Hi Jakob, what Glen means is that your biceps looks a bit uneven and you can down the left and I would suggest to down a bit your forearms to close the gap wrist/hand plates. I know those photos aren't for approval , but you can take note. Reference images

Glad it worked, and don't worry, we love photos

Hi JC, welcome to FISD. Personally I have used Car polish , not specific brand, clean the long time trooping dirt. Cheers

Hi, which one are you using? Are you on a PC, Cellphone? Have you tried "BBCode" ? Thanks

Hi Micah, welcome to FISD. Glad to read you're on the way of becoming a 501st member. About your question to join de Legion and additional to what Glen has pointed, . you can find some helpful info Here but in general speaking the process is easy once you have your armor ready. I would recommend to contact your local garrison or nearest one. , you can find it Here they can bring you some more details. You apply just a single time to enter, some detachment have high levels certification programs that are optional. Hope this can give some better idea of what to do.