giskard8

Yes. But if you are doing ESB, you will need to swap out the scope to a M19 (if you are bend on getting it accurate). Find @bulldog44 on this forum, he makes amazing resin replica kit of both M19 and M38 scope, direct from Japan. What you won't be needing from the kit is the Hengstler Counter and the Power Cylinders, you can toss them on the sales section here and look for a buyer.

Hey Nadas, May 4th is just around the corner, why don't you hold on for a few more days and see if any of our listed maker will be doing flash promotion on the day.

I believe that is a RS-Propmaster ESB stunt/promo E-11, there is no D-ring on it what so ever.

Approved: 1) TK - ANH Stunt / L2 2) TK - ANH Hero / L3 3) TK - ESB / L3 4) TK - TFU Commander / L3 5) TK - BF Shocktrooper 6) TD - Sandtrooper 7) TI - Reserve Pilot 8) IC - ANH Bridge Crew Working on: 1) TS - Snowtrooper / 60% 2) TX - Inferno Squad Del Meeko / 55% 3) TI - Rogue One TIE Pilot / 60% 4) TI - 181th TIE Pilot / 20% 5) TI - 181th TIE Pilot Baron Fel / 20% Planing / on paper: 1) CC - Clone Commando (2021 project) Not looking for approval: 1) Rogue Squadron Pilot Baron Fel / 40%

Congratulations and welcome to EIB!

Congratulations! Welcome to EIB.

Hello Nick, Welcome to FISD!

Hello Eric, If you can post some pictures on the area you have doubts I am sure our experts here and help you resolve them quickly.

Got some help and had another opportunity at the photo booth today.

Congratulations trooper! Welcome to the EIB.

Congratulations trooper!

May 4th is a good day to buy. Makers usually roll out a promo on that week.

Congratulations Adi, Welcome to the ranks.

Welcome to the ranks.

Blue tape don’t do curves. What I did I found workable is to cut the tapes into strips of 5mm - 10mm wide, then they are easier to conform to the shape of the boot. Then use some more tape to cover the exposed area leaving the area to be paint clear. For the position and the size, I just eyeballed it using masking tape to do a mock up and take pictures to check against the CRL and game grab screens, before I really go on to the painting process.

Re-did the strapping on the left side of the arm to see if this looks better.

Thank you Dan, I will address those issues as you suggested.

. PM me your address I can have some pan head TD screws send to you in a few days, no sweat.

Congratulations! Welcome to EIB.

Thank you Dan, Here are the updated photos (satin gloves, they are too thin and showing flesh underneath so I wore double). Thank you!

Aside from the shape, is there a specific size for the pan head used on screen?

A 6-32 pan head Switched 4-40 out with 6-32 :

Hello Glen, Yes indeed, I missed that the bicep should drop much lower than that. Will find a fix for it later. Corrected the button plate, just a fit here before I glue it back with E6000:

Hello Tony, I am using a set of 4-40 pan head, I blame the fuzzy photos and the lighting for not showing it clearly. Maybe I should switch to 6-32 to size it up? Looking at the reference photo you provided, 4-40 seems a bit on the small side.

Action pose: Please let me know if there is anything missing for the submission. Thank you.