gmrhodes13

That is a very basic Rubies blaster which can be found in costume shops and Ebay ($20) ( as well as other places) Some garrisons will approve for basic but check with your GML (garrison membership liaison) If you have a look through some of the build threads many post information about where they have purchased their blasters

When using Imgur for photos try using the "direct link" option

You can also use screen and promo references for research

Oh happy days, nothing better than a BBB, the absolute joy and excitement, then the sheer panic sets in When ever in doubt head to the gallery section, lots of great references there https://www.whitearmor.net/forum/gallery/ Looking forward to seeing the progress, good luck

Measurements given in this document are intended to be approximate and generalized; not criteria for approval.

Thats so last year (or 4 ago) , mine was better anyway

Thats a lot of filling and sanding, good on you for sticking it out. I go for dinner prints these days as my hands can't do a lot of sanding, longer to print but a single pass of spray putty and good to go. With your research try to go off screen references above the CRL, they will be even more accurate. Keep up the good work.

You could try to message @CrookKnight I know he did a build and offers other packs

Nice work, the ribs are a little wide side though.

A little more paint today, another coat of grey on the teeth, then some black on the ears On to the vocoder Paint those screws before I forget again Left for a few hours then on to the grey on the ears Once the grey has dried I'll be able to finish the black strip across the ear (TFU detail) Will leave to dry today then I will apply the decals, I would love to paint but my hands are still not that good, was hard enough doing the ears.

I can just hear the arguments on the legion boards that this one will start in regards to a CRL

Page 6 ANH E-11 https://www.whitearmor.net/forum/topic/44389-blaster-master-e-11-build/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/36996-kingyetis-e-11-build/, restored by gmrhodes13 Page 5 ANH E-11 https://www.whitearmor.net/forum/topic/37653-site-stormtrooperblaster/, restored by gmrhodes13 Page 4 ANH E-11 https://www.whitearmor.net/forum/topic/33966-free-3d-printed-parts-for-e11-builds/, restored by gmrhodes13 Page 3 ANH E-11 https://www.whitearmor.net/forum/topic/31747-kawnrs-rubies-e-11-conversion/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/38028-kwakers-blaster/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/47572-looking-for-help-with-doopydoo-upgrade/, restored by gmrhodes13 https://www.whitearmor.net/forum/topic/47573-how-long-is-your-scope-rail/, restored by gmrhodes13 Page 2 ANH E-11 - Page 1 ANH E-11 - ANH thread completed except the following due to the size and amount of images: Too big to do in one hit: Tim DarkCMF 17 pages & @Bulldog44 11 pages @Twnbrother Another 11 pages @I'm Batman 13 pages @usaeatt2 9 pages & @Bulldog44 13 pages & @gazmosis 7 pages with image overload

Looking forward to seeing the progress, good luck

Some have had success removing super glue by soaking in a warm salt bath, or placing in the freezer, depends how much glue and how long it has been since applied, may be worth trying one of those.

Hello and welcome aboard, there are a lot of build threads for the heightwardly challenged trooper https://www.whitearmor.net/forum/topic/38416-crickets-rs-stunt-build-for-the-vertically-challenged/ https://www.whitearmor.net/forum/topic/38842-fragarocks-rs-stunt-build-not-to-scale/ https://www.whitearmor.net/forum/topic/42868-sha-shas-wtf-anh-stunt-build-complete/ Make sure you post up a build thread, great way to get feedback on how your build is going. Good luck

Looks much better, nice work

Hello and welcome aboard, you are a very lucky fellow

Page 8 ANH E-11 https://www.whitearmor.net/forum/topic/38731-ctids-doopys-e-11-build/#comments restored by gmrhodes13 https://www.whitearmor.net/forum/topic/42113-e11-blaster-build-feedback/ restored by gmrhodes13 https://www.whitearmor.net/forum/topic/35599-thrawn’s-guard-e11-blaster-stands/ restored by gmrhodes13 https://www.whitearmor.net/forum/topic/32034-marhsalls-doopydoos-e11-pipe-build/ restored by gmrhodes13 https://www.whitearmor.net/forum/topic/18583-yahm-yet-another-hasbro-mod/ restored by gmrhodes13 Page 7 ANH E-11 https://www.whitearmor.net/forum/topic/43022-newbie-3d-print-build-for-newbies-finished/#comments restored by gmrhodes13 https://www.whitearmor.net/forum/topic/30209-phoenix-props-anh-e-11-pipe-build restored by gmrhodes13

A couple more

A couple more troopers

And can't leave out the first order

New CRL anyone, holiday version Stormtrooper. Not sure why he'd know what a Porg is, wrong era Imperial Stormtrooper (Holiday Edition) This festive trooper is wearing an ugly Christmas sweater featuring an AT-AT and include a porg and vibro-axe. A range trooper too

With the warmer weather coming up and cabin fever well set in I thought it was time to break open a box and get to work cutting up some ABS. This build was going to be a TFU Commander but since there has been work on the CRL for a standard TFU Stormtrooper I thought I'd start here then convert it to a Commander later. I've had a couple of ATA helmets sitting around for some time so I'll use one of those and also have a set of RS armor which was part payment of a commission build. First up tape the outside ready for some satin black, I like the interior dark, helps stop light reflections inside the helmet so people have no chance seeing your eyes. Now let's see if I remember how to do this, let's tackle the helmet first, everyone loves ears Get the basic trimming out of the way and start aligning. ATA helmets are a bit of work to get sitting just right, the right side is a little shorter and the backplate higher so it takes some wiggling. I normally throw a couple of screws in to get everything sitting right. On to everyone's favorites, ears. Rough trim done and adjusting to suit. Getting the angle just right, we know how these DO's love their angled ears Happy with that, time for some screws I won't bore you with the other side, brow trim fitted. I like to run a pencil inside the lenses and teeth, helps as a guide when trimming. Small file bit on the dremel, then files and sandpaper First light coat of paint on the teeth, I find if you go too thick it can craze. Mic tips are painted, forgot to take a photo of those and that's about it for today, I'm just easing into this build, still getting over some medical issues and ongoing problems but should get there in the end.

Nice work on the fix