gmrhodes13

I think the magazine would have made a big impact on how the blaster was holstered initially but as you say not with the SR-14, what came first the chicken or the egg Although I've scoured the interwebs I've still not been able to find a full side Promo trooper image, it's a shame so many of our older threads have lost images I'm sure there was a treasure trove at one time. There are still images I see come to light in some of the prop groups that I've never seen before so there is still a chance an image may come to light one day.

Forum has a limit on attachments unfortunately, you could imagine the amount of images this forum could contain. Many of us use a free image host, upload images there then copy and past the "direct link" into your post, I use Imgur To come this far you have done very well and only a short distance to go until we see you join the ranks. If you get to a ready to submit to GML (garrison membership liaison) you can post in the pre approval area for feedback if you so desire

Hello and welcome, you are just about there. Can't quite make out a few details as the images are quite small and won't enlarge well. You may want to try bring your cod upwards a little, that would help close the gap between your backplate and kidney and also make the sides meet a little better Your right thigh is a little low, note it's contacting with the shin Don't forget white paint on the thigh ammo strip rivets, also abdomin side rivets if they haven't been painted (hard to see) Note your posterior plate is riding up on the left, V tabs can help but see if you can adjust some of your strapping first. V Tabs With a heat gun or oven you bend strips of ABS plastic into the shape of a V, only glue one side and the other remains free to allow movement when you bend. Just helps stop the butt plate from pushing back from the back plate. Looking forward to seeing the progress

I have a L3 pipe/doopy build for canon troops and a Hasbro L2 for non official troops, a lot lighter to carry around. Both have electronics and both have a separate jack to run a cable to the aker amp. My L3 also modified to go ESB or ANH depending what I'm wearing.

You would have to make sure they have the similar sides/elastic area, height and width as well as curve at the bottom and are high enough, a lot of boots are too short and come out under the shins. Also need a flat sole not ridged with a conservative heel References

Added 10/10/23 Black Series TKC is shown with black loops (ESB style) it could be an option but only worn on left. CRL also states ESB style worn on right which is incorrect and also a ROTJ could be used with is incorrect also.

Another detail, we see a lot more troopers with cast/resin E-11's, this is the same with the Kenobi, Ahsoka series Filled scope rail Open scope rail Both should be acceptable all the way to L3

SE-14R Holster Research There has been a lot of research over the years on the subject of the "Promo" "Hero" trooper and what holster should be used for the SE-14R but there are no absolute official canon images of what the holster should look like, we only have partial images and peoples interpretation of those images. Much of the research has been lost due to the "Photobucket Debacle" and some archived but I've added what is salvageable below RS Holster worn by Hero helmet trooper below, mid attachment, believed to be a rebel DH-17 holster put on a TK belt (incorrectly). Also note the stitching is on the left (front) of the holster and the standard E-11 is on the right (back), it is shorter than the E-11 and also angled on the bottom. At first only believed to be worn by 1 trooper we have the image below showing 2 troopers sporting this style of holster. Very easy to spot as the holster is a lot shorter than an E-11 holster and slightly angled on the bottom Holster comparison E-11 on left, RS Variant on right - no cutout like promo trooper. Note the stitching is on the opposite side of the holster. Hero Promo, short like the RS holster also stitching on the left (front) BUT with a cut-out section and SE-14R in the holster, once again you can see it is a lot shorter than an E-11 holster as it is high on the thigh. This could very well be one of the RS style holsters modified with the cut out seen below. 4 rivet attachment as you can see the two rivets on the one strap below While looking at a lot of the promo pictures I can see it has an angle from left rising to the right much like the RS Variant holster so it may even be a similar design with the cut out added to it. Angled upwards in green After some debate and going over a lot of the reference material we concluded there had been different versions of the RS Variant / Promo / Hero trooper holster: 1 Hero with the tapered RS holster, sewn on opposite side and belt attachment in the middle with 2 rivets, wearing a detonator and no belt cover squares. 2 Hero Luke and 421 have the standard 4 rivet belt attachment E-11 style with com and grappling box 1 Hero the standard 4 rivet belt attachment E-11 style with detonator 1 Hero PROMO tapered holster RS style with cut out/notch for E-11 or SE-14R (trooper could holster either style weapon), 4 rivets on belt, sewn on opposite side, wearing a TD. My SE-14R Modelled from the RS Variant photo, but no cut out like Promo trooper I believe the cut out on the Promo trooper may have been added as removing the blaster from the holster may have been difficult while wearing gloves, the cut out may allow access to the trigger area, but that's just my thoughts Until any further references come to light this is the conclusion, check with your GML or GCO, some will allow non canon items to be worn, some won't.

There is no references for the CRL so it can't be added as an official canon item. There are no absolute images of an SE-14R holster and a Stormtrooper, even the Promo Stormtrooper we only see partial images and those have a cut out in it, different to the holster seen in A New Hope No hay referencias para la CRL, por lo que no se puede agregar como elemento canónico oficial. No hay imágenes absolutas de una funda SE-14R y un Stormtrooper, incluso en la Promoción Stormtrooper solo vemos imágenes parciales y tienen un recorte, diferente a la funda que se ve en A New Hope. This is the holster some think is for the SE-14R BUT the promo trooper image shows a cutout so it's different to that one Esta es la funda que algunos creen que es para el SE-14R, PERO la imagen del soldado promocional muestra un recorte, por lo que es diferente a esa. This one has the cutout Este tiene el recorte

You need to log on to the forum at least once each census year (November - October) to remain active. More info here

Hello and welcome aboard, each costume has a CRL (costume reference library) base standards for 501st legion acceptance, for EPV https://databank.501st.com/databank/Costuming:TK_esb Lots of research with this hobby but don't worry there are plenty of people here ready to help and answer your questions Good luck

Entirely up to your GML for approval purposes and up to your GCO for local events. There are no absolute clear references with a SE-14R holster and there was some debate whether the SE-14R holster was different from an E-11 holster. Depende totalmente de su GML para fines de aprobación y de su GCO para eventos locales. No hay referencias absolutamente claras con una funda SE-14R y hubo cierto debate sobre si la funda SE-14R era diferente de una funda E-11. https://www.whitearmor.net/forum/topic/46550-alternative-holster-pattern/ https://www.whitearmor.net/forum/topic/41393-se-14r-holsters-what-is-everyone-using/ https://www.whitearmor.net/forum/topic/49928-anh-holsters-variants/ https://www.whitearmor.net/forum/topic/53908-se-14r-holster-research/

I am still using the bottle that came with it, may be small but does go for some time, mind you I've only used it a few times at conventions, jetpack is a little heavy to lug around all day. I have read reviews on the site and quite a few say it lasts a long time. I was going to try mixing some myself, on the Microfogger site it says it uses 2 chemicals, Propylene Glycol and Vegetable Glycerine, I guess it would just be a matter of playing with the mix.

You can also just cut the corners if you don't want rounded ones, more screen accurate but won't be an issue for higher level approval, both are accepted

Looks like you've pointed out most things. Pulling your chest down may help pull up the backplate. As you are quite tall you may need a gap between the backplate and your kidney to allow it to come upwards. Agreed your shin looks a little big. Adding some foam behind can help pull the shin away from your knees so they don't catch. I noticed your shoulder strap to shoulder bell is on top of you shoulder elastic, usually these go underneath so the black elastic isn't seen if it pulls outwards Also noticed the holster straps attachments aren't quite aligned, may get picked up for base approval

Research Wraps Boots Cod heights Detonator Majority of troopers are seen with grey on the inside caps, both sides of their detonators. But there's always "that guy" who has to be different These are all white, but this scene is a behind view of the first image at the top, it could be drawn as the end cap walls look pretty thick. Also the ribbon/tape on the middle troopers backplate appears to go under the O 11, which makes me think drawn. Tape Zombie troopers

NEW In Memoriam Detachment Leader Merchandise Officer CRL Updates Hall of Fame FISD Meme's Around the Detachment Legion Census INFORMATION & AWARD PROGRAMS FISD Tri-Fold Brochure Common FISD Acronyms and TK Glossary Pre Approval Forum 3D Section Field Exercise Award Imperial Attaché Program Master Armorer Award Fire Teams EIB & Centurion: What do these terms mean? Need Help Ask the Deployment Officers Advance to 1500 Advanced Tactics Awards Newsletter Editor Staff List 2023 Follow FISD The 1500 unquestioned loyalty! Greetings fellow members, Welcome all to the October edition! What an exciting month gone by since our September newsletter, with plenty to sing about, so let's get stuck into it. Finally, we were able to get the green light on the long awaited Commander Pyre CRL, literally years in the making but now a 501st approved CRL. Congratulations to Dino (Sano) TK 75608 for his epic work bringing this character to life from the animated series Star Wars Resistance. More about this further down. https://databank.501st.com/databank/Costuming:Commander-pyre The Ahsoka series turned out to be very exciting for several detachments, with plenty of research going into developing good resources for what should be a bumper crop of new costumes for Legion. FISD certainly included amongst those with some pretty cool looking TK's and a new captain to boot. We have done our best to keep the forums and our SM platform as spoiler free as possible, but now the series has ended, it's time to have some fun open discussion on what we have seen. We have submitted requests to have both Night Troopers and Captain Enoch housed here on FISD, so we can create the CRL's. These are still out for a Poll in the LMO office, but at this stage no other detachments has shown interest. With that in mind, I would like to officially launch Two new sections within our forums. Night Troopers AND..... Captain Enoch The new sections can be found under the pre-existing area https://www.whitearmor.net/forum/forum/31-costuming-and-builds-original-trilogy-and-anthology501st-approved/ Like any new addition to our forums, these new sections will have build threads, an already populated resource and reference area, plus an available vendors list, all designed to make it as easy as possible to get your new dream costume well under way. I would like to thank all the FISD staff who have helped with the resources and discussions regarding the viability of these fantastic looking costume becoming a pert of our awesome detachment. MERCH TIME AGAIN, yep you better believe it!! As one merch run closes, the next opens. Get ready and check further down in this addition for what is about to go live, but we won't stop there, we got more exciting merch a commin! We can't wait to reveal to everyone what it is. Keep an eye on the forums for potential sneak peeks in the coming weeks/ months. That's it from me, but there is plenty more information for everyone in this edition. Enjoy With Unquestioned Loyalty Andrew Franke TK-11469 "Sly11" Detachment Leader Greetings Troopers! It is about to get interesting with the merch, keep your eyes on the forum and social media. First off the shield patch run. The FISD small and large shield patch run was approved. The troopers that filled out the interest form have been contacted to confirm their order numbers. Members have until 20 Oct 2023 to confirm and reply to the email. The run will open to the rest of the detachment on 21 Oct 2023. You can find more information on the run thread here We will also be offering EI and Centurion rockers to go with the shield patches. More info will be posted in the Detachment Merchandise. We will be opening an interest thread for our newest item in the not too distant future. We are putting an FISD twist on an older item, staff have been discussing this item all term and we hope that the Detachment will be excited about it as we are. It will be offered in two sizes. Just waiting on approval from the LMO's. More information soon, keep your eyes on the forum, newsletter and social media. With Unquestioned Loyalty James Silvius TK-12953 "jsilvius" Merchandise & Branding Officer CRL Update Commander Pyre It is with great pleasure FISD presents Commander Pyre CRL officially approved and open. Congratulations to Dino (Sano) TK 75608 for his epic work bringing this character to life from the animated series Star Wars Resistance. This one was a long time in the making and we are excited to finally add this new costume to the detachment roster. We now stand at 21 CRL's https://databank.501st.com/databank/Costuming:Commander-pyre For the Emperor! Please welcome, TK-10351 to the Stormtrooper Hall of Fame, September 2023! @RCMUSTANG Troop log can be found here. Congrats! Other HOF recipients can be found here. With Unquestioned Loyalty Jonatan Östling TK-23592 "Nairy" Curator Hall Of Fame Thank you to Luca "Morgi" TK-66744 for starting the FISD specific meme thread, you can find it here Mobile FISD Backgrounds/Screen Savers (1280x1920): 1. 2. You can desktop background image here With Unquestioned Loyalty Jonatan Östling TK-23592 "Nairy" Content Editor Support Trading Card Archives For those with FISD detachment trading cards please consider sending two to Paul @Daetrin keeper of our detachment archives. Address and more info here With Unquestioned Loyalty Paul Hoeffer TK-8020 "Daetrin" Detachment Founder Keeper of Archives 501st Legion 2022-2023 Census has begun, it is the responsibility of all 501st approved members to fill out the census each year which you can find here You must be registered on the main forums to participate in the census:here I didn’t’ troop because of Covid-19 Due to Covid-19 many didn’t get the opportunity to troop during this census period, Legion Command has advised that GCO’s will determine how they want to proceed in regards to a members trooping activity and status, as such check in with your local garrison command. Here's what the charter says about activity definitions: Operations Protocol/Membership An Active Member is defined as a member in good standing who meets the following requirements: Meets all 501st Membership Requirements (i.e. ownership of an approved costume, is over 18 years of age, etc). Has an approved membership record in the 501st Legion Membership Database Maintains active contact with their Garrison CO or GML. Active contact and participation will be confirmed during the annual Legion Census held each year during the month of October. Maintains contact information/membership record in the 501st Legion database either through their Garrison CO or GML. Participates in at least one Garrison or Legion activity per year while wearing an approved 501st costume owned by said member as recorded in the Legion Census. (One year is defined as the period from Legion Census to Legion Census). Examples of an activity include, but are not limited to conventions, charity events, or any activity designated as an official event by a coordinating administrative unit of the Legion. Members who serve in military branches are exempt from activity level requirements if their service renders them unable to meet these requirements. These Minimum Activity Level Requirements should be administered as justly and with as much common sense as possible. A member may retain active status, even if they do not meet all of the requirements listed above at the discretion of their unit Commanding Officer or Legion Command. Filling out the census only takes a few minutes and you also have the opportunity to update your contact information ie: address, email, phone and so on. THE LAST EVENT TROOPED is the most important piece of data. Because our trooping year was cut short due to Corona-virus, Legion Command has recommended membership status changes are left to the discretion of the Unit Commander so please check in with your local command prior to filling out your census. NOTE: members who were not able to troop should enter "COVID-19" as their last troop. Any questions you have in regards to the census please contact either your GCO (garrison commanding officer) or your GML (garrison membership liaison) Census form layout With the last forum update the viewable area of the census may not be full page, as such change your page magnification to 75% and you should be able to see the whole page. Note: make sure you tick the box "Is the above information correct?" please tick YES If you have any problems with the logging in please contact the LWM team here: [email protected] So stand up and be counted troopers, you have until 31st October. INFORMATION & AWARD PROGRAMS For a full list of FISD awards programs head here. *Now Available in Swedish* Want to spread the word about FISD?, you can with our FISD Tri-Fold Brochure. Originally these were done in a limited run by the member who created them, but nowadays, we have moved this to a print your own service making them accessible to all countries around the globe. Files are available to all full 501st members on request by contacting our DL Andrew @Sly11 , you can find more info here Currently Available languages: English - Spanish - German - Swedish Are you new to the FISD and wondering what the heck all those abbreviations and strange sounding terms mean? To help you @justjoseph63 has started a list of the most commonly used ones that will give you some insight. If you have ANY questions about a particular term that is not listed or suggestions for new ones please contact Joseph. You can find the list here. Pre Approval Forum allows future Troopers the opportunity to submit photos of their completed build to be reviewed by the Staff, Imperial Attaches and others in preparation for forwarding it to their GML for approval. Any and all advice/suggestions given will be specific, constructive, helpful and respectful. Please note that this program will NOT take the place of your local GML, as Detachments are not chartered for costume approval and can not override a GMLs decision, but is instead a peer review program designed to help you look your best and offer guidance and positive feedback. For more information on this program, please visit the link here. Don't forget to visit our 3D section when next surfing the FISD forums, there is plenty of useful information to potentially help you on your next TK adventure. You might be feeling may generous and share with our community a new TK related 3D file and maybe win yourself a 3D contributors award so check out the details below and be part of the in house 3D community. Here is a link to the FISD 3D Contributor program. Don't forget to create a troop log here on FISD and get awarded for your adventures The list of accomplished troopers keeps growing, so get on board and register your troops today Simply start (or update!) your troop log, keep the running total in the title, and post (at least!) a date and name for the official 501st event where you wore your TK! Once you've hit a milestone count, go over to the "Field Exercise Awards -- Post your milestones here" thread to request your profile be updated! Simple, right? Also if you would like your troop photos shared on our social media channels please add the following to the first post of your FISD troop log: I give permission for FISD to repost my photos on social media in an appropriate fashion. Award Recipients September - October TK-12775 "Sithping" Paul - - - - - - TK-89400 "revlimiter" Adam - - - - - - Are you an approved TK that spends more time on the boards than the average Trooper? Do you enjoy using your knowledge to help out future and existing Troopers? If so, we would like to invite you to join the Imperial Attaché program! Members of the I.A. team are chosen to help out not only those here on the boards, but on a local level as well. Our aim is to have at least one in each and every Garrison, Squad and Outpost in the entire legion to be the eyes and ears of the FISD on a local level. For a complete list of Imperial Attaches, go here. Some of the benefits: Access to exclusive Attaché merch., including patches, IA patch and IA Rocker You may also be in the running for an Imperial Attaché Award Imperial Attaché Award for those attaché's who have gone above and beyond [minimum 1 year of service]. You can find a list of prior recipients here. ATTACHÉ AMBASSADOR Attention all Attachés! Please take a moment to check out the recent Q3 update in our Attaché HQ! And, remember that we are always be on the lookout for new Attachés, especially for units currently without one (or two) as shown on THIS LIST. If you know of a trooper who you think would serve the post well, encourage them to apply for Attaché status HERE, and feel free to put me in contact with them! With Unquestioned Loyalty Caleb Mask TK-73692 "MaskedVengeance" Attache Ambassador The FISD Master Armorer program is an optional, detachment only incentive award to recognize individuals who have directly helped another 501st stormtrooper to achieve Expert Infantry status. Some people spend countless hours helping others, and want to reward their results as well as incentivizing new people to help as well. To register a “win” in the program, the assistance must have provided hands-on help trimming, building, and/or fitting of said armor for the person who was awarded Expert Infantry status. More information can be found here Want to setup a "Fire Team? the Fire Team program is completely optional, and is intended to help form a common identity and spirit of camaraderie among 501st Legion Stormtroopers in the same geographic area/garrison that troop together. Fire Teams are not officially recognized by the 501st Legion nor the FISD, although they will be able to access a Fire Team sub-forum on the detachment website. You can find more information here. For those interested here is the original discussion on the creation of Fire teams here With Unquestioned Loyalty Mark Ryner TK-4584 "captsafe66" Fire Team Relations So what exactly are and levels? These programs were designed for those who choose to take their armor above and beyond the minimum requirements for basic 501st Legion approval. It gives you the chance to show a level of dedication and pride that takes your armor closer to being as "screen accurate" as possible, without as much extra work as you may realize! You can find more information on the programs here. For those unaware it is possible to achieve extra awards at Expert Infantry for each additional version costume you have approved, additional awards are not issued with another Expert Infantry number (you are only issued 1 Expert Infantry number) but you will see a star above the award on your profile and the thread title will show [APPROVED] 2nd, [APPROVED] 3rd, [APPROVED] 4th and so on. Multiple EIB award recipients and info here NOTE If you are approved with a "2nd Version" of a particular costume that you are already approved with you do not receive an additional award, there is only 1 award issued for each costume version ie: only 1 x Hero, 1 x Stunt, 1 x HWT, 1 x ESB, 1 x TFA and so on. If you have a second/additional version costume approved you will see "2nd Version" and [APPROVED] added to the thread title, no additional profile stars (more info on profile awards here) For those of you who have a particular issue (or issues) before or after submitting for Expert Infantry / Centurion level approval, in order to get you an answer faster you can now privately contact the entire Deployment Officer team at one time! Questions about fitting, repairs, CRL standards/requirements or anything pertaining to reaching Levels 2 and 3 are not only welcomed, but encouraged. Keep in mind that no question is too small, and that your queries will only be seen by the D.O. Staff. We are here to help in any way we can, so please feel free to send us a message by clicking on this link: @Deployment Officer Team and we will get back to you A.S.A.P.! The 1500 unquestioned loyalty! This area lists all those who have gone above and beyond basic approval toward screen accuracy and obtained EIB or Centurion or both. FOR September - October the 1st Imperial Stormtrooper Detachment would like to congratulate the following. Expert Infantry Badge Award: Manvi "Manvi Viztoria" TK16970 EIB 1069 GREAT job on your approval, now on to Level 3! Request your free EIB certificate here. You can find a list of multiple award recipients here. Multiple EIB award info here Expert Infantry Honor Gallery here --------------------------------------------------------------- Centurion Badge Award: Manvi "Manvi Viztoria" TK16970 Centurion 526 Outstanding job on reaching Centurion, Trooper! Request your free Centurion certificate here. You can find a list of multiple award recipients here. If you see any of these Troopers around your Garrison or Squad, be sure to congratulate them! Another bumper issue, if you have any interesting articles or stories please reach out to me. For anyone interested in having a look through any of the older newsletters they can find be found here. With Unquestioned Loyalty Glen "Q" Rhodes TK-85421 "gmrhodes13" PRO, Newsletter Detachment Leader (DL): Andrew Franke (Sly11) TK-11469 Detachment Executive Officer (DXO): Joseph Pedigo justjoseph63 TK-10963 Chief Deployment Officer (DCA): Mario Reyes (TKSpartan) TK-48117 Deployment Officer (DCA): José Mª Sánchez (Chemi) TK-30173 Deployment Officer (DCA): Tony Jobe (ukswrath) TK-10116 Provost Marshall (DCoG): Steven Sheades (starsaber25) TK-10466 Provost Marshall (DCoG): Tim Waychoff (DarkCMF) TK-51878 Provost Marshall (DCoG): Chris Pearson (themaninthesuitcase) TK-10911 Special Unit Director-Valkyries (DCoG): Teresa Nuthall (Soulart) TK-41307 Provost Marshal SM Platforms (DCoG): Christoph (Danny) Lauber (Ripper_L) TK-55550 Fire Team Relations(DCoG): Mark Ryner (captsafe66) TK-4584 Merchandise and Brand Officer (DMBO): James Silvius (jsilvius) TK-12953 Trading Card Specialist (DMBO): Eric Ho (Hoda) TK-77520 Personnel Officer (DPER): AC (NoVATie) TK-5597 Content Editor Support (DPRO): Adam Wolf (Revlimiter) TK-89400 Content Editor Support (DPRO): Jeff Salt (Wingnut65) TK-50297 Content Editor Support (DPRO): Jonatan Östling (Nairy) TK-23592 Content Editor Support (DPRO): Vicky Mandlmaier (Vicky_Velocipanda) TK-50893 Social Media Relations (DPRO): Luca Hahn (Morgi) TK-66744 Newsletter Publisher (DPRO): Glen Rhodes (gmrhodes13) TK-85421 Attache Ambassador (DPRO): Caleb Mask (MaskedVengeance) TK-73692 Systems Administrator (DWM): Eric Brager (Darth Aloha) TK-9674 Systems Administrator (DWM): Mathias (Locitus) TK-2959 Detachment Founder (DF): Paul Hoeffer (Daetrin) TK-8020 Facebook: www.facebook.com/whitearmor Facebook Group: 1st Imperial Stormtrooper Detachment (FISD) Official Twitter: www.twitter.com/FISD501st or @FISD501st Instagram: www.instagram.com/fisd501st Discord: https://discord.gg/FmQZ2qW8gx On behalf of the 1st Imperial Stormtrooper Detachment Command Staff and the Imperial Propaganda Department

Research Backplate Chest comparison Fabric/Belt/Kama SheevsEmporium Research Gloves are Maroon color, see Wookiepiedia high resolution image for source image showing dark maroon/burgundy gloves. Tough Gloves Mod similar to Boba /Din. The double stitch and shape of thumb, all leather appear a high probability. Small X type stitching detail across sash seams. Higher Tex Bonded Thread to be sampled, hand sewn detail only. Sash is sewn panels on diagonal. See Comments for proposed makeup/sample. Sash in Leatherette(leather) with opening on wearers right rear hip. Opening closes rear over front with minimal overhang. Suede (faux suede) Quilted diamond stitched Tassets Left and Right, Edged in lighter shade Velvet or lighter shade Suede. Kama is 6 Panels total with Privacy panels present front and rear. Image in Comments showing proposed design. In Leatherette (leather) material, same as Kama. Edged in Velvet or suede same as Tassets, samples to come soon. Belt is Layered leather in different Oz. makeup, covering stitching as needed, opening in front with End user applying small belt holes and attached to sash via Velcro center strip hidden by outer thin layer of leather decorative strip. Belt loops are attached via the front and via snaps in the rear allowing swivel motion as seen on screen. Entire Sash assembly is Snap attached to lower edge of Abdomen/Kidney armor. It is recommended to find armor that has this option to allow for sash placement. Enoch is believed to not wear a cod, nor a butt plate. Upper shirt is patternedsimilar to all R1 patterns with mesh under arm, assuming mesh is present. Ribbed just under 4mm throughout on Jersey knit. There is no Raglan pattern identified, (as suggested by CGI intro scene), standard Shirt pattern is used throughout references. Neckseal is Black horizontal Ribbed with closure via flap, left over right (screen capture available confirming rear closure method) no visible rear zipper is seen. Holster matches shape of blaster handle and attaches via 2 snaps over belt in between sash. Holster is larger up top and narrows towards the bottom. Pistol is unknown at this time aside from handle and scope partial views. Shoulder Straps Blaster

Looking forward to seeing the progress

Helmet Cog Orientation and Weathering

Standard - open scope rail Standard with flashlight - open scope rail Cast (resin/rubber) filled scope rail

Night Troopers Night Troopers were the stormtroopers who served aboard the Imperial I-class Star Destroyer Chimaera under the command of Captain of the Guard Enoch. The troopers comprised the forces of Grand Admiral Thrawn while they were stranded on the planet Peridea. Night Troopers' armor featured cracks filled with gold and grey accents and red strips of fabric. Helmet Jimmiroquai Fiberglass - Facebook: Link Here Email [email protected] 850 Armor Works Resin - Facebook: Link Here Website Link Here Email [email protected] Galactic Armory 3D Files - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Nico Henderson 3D Files - Facebook: Link Here Etsy Link Here Upgrade files: TKModder421 & OxProps Lens: Mr Paul's Shoretrooper Build NerdForgeDesigns 3D Files - Facebook: Link Here Etsy Link Here DO3D 3D Files - Facebook: Link Here Website Link Here PewPewCrafts 3D Files - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Cults Link Here OxProps 3D Files - Facebook: Link Here Etsy Link Here Armor Jimmiroquai Fiberglass - Facebook: Link Here Email [email protected] 850 Armor Works ABS - Facebook: Link Here Website Link Here Email [email protected] DO3D - Facebook: Link Here Website Link Here PewPewCrafts 3D Files - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Cults Link Here 3D Files Helmet Nico Henderson Helmet 3D print files https://www.facebook.com/nico.heath Etsy Nicolai DesertFareCosplay https://www.etsy.com/au/listing/784808040/rogue-one-stormtroopersolo-mimban Nico designs extremely accurate helmets, his Shoretrooper helmet is considered the most accurate available and now he has designed a ROTK helmet that is extremely accurate and all the greebles are separate so you can print and paint them before attaching them. You will need to message him on FB. I have his ROTK helmet files and find them to be outstanding. Suggested print orientations https://www.whitearmor.net/forum/topic/53519-recommended-printing-positions-for-nicos-tk-helmet/ Updated files TKModder421 https://www.whitearmor.net/forum/topic/53406-modifying-the-nico-helmet/ OxProps https://www.thingiverse.com/thing:4227844 Lenses Green Rogue One TK lenses to fit the Nico Henderson helmet Mr Paul's Shoretrooper Build https://www.facebook.com/totalgrunt Armor akira-yuming Armor 3D print files https://www.cgtrader.com/3d-print-models/art/other/star-wars-rogue-one-tk-first-imperial-stormtrooper-armor ( Build thread Jason @BigJasoni build thread https://www.whitearmor.net/forum/topic/49826-the-bigjasonis-rotk-3d-print-build-thread/ Updated 3D files Jason @BigJasoni updated kidney plate https://www.whitearmor.net/forum/topic/52974-rogue-one-new-generation-eib-centurion-kidney-plate/ Jason @BigJasoni updated belt boxes https://drive.google.com/drive/folders/19k-95YPTsiBJzHGIumsGLYQjQlx_S0p4 Jeff @11b30b4 updated ab greebles https://www.thingiverse.com/thing:3973969 Jeff @11b30b4 updated handplates https://www.thingiverse.com/thing:3910278 Shoulder Strap 3D files printed in TPU https://www.whitearmor.net/forum/topic/57810-rogue-one-tk-shoulder-straps/ Soft goods Dark Side Closet - Facebook: Link Here Geeky Pink’s Gaskets - Facebook: Link Here Keep Smiling (Formerly Imperial Boots) - Website Link Here Sheev's Emporium - Facebook: Link Here Gloves Keep Smiling (Formerly Imperial Boots) - Website Link Here Endor Finders - Website Link Here Boots Keep Trooping (Formerly Imperial Boots) - Website Link Here Crow Props - Website: Link Here E-11 S&T Full Metal Airsoft - Website Link Here War Machine - Website Link Here Bulldog Props - Facebook: Link Here Shear Tech - Facebook: Link Here E-11 - 3D Files OxProps - Facebook: Link Here Etsy Link Here trooper96 - ROGUE ONE E-11 HEAVY DUTY S&T STERLING L2A1 AND ROGUE ONE E-11 RECEIVER TUBE PARTS KIT ROGUE ONE E-11 CONVERSION KIT FOR STERLING SMG ELEMENT AIRSOFT M300A MINI SCOUT FLASHLIGHT E-11 References Link Here Facebook Build Group Night Trooper Build Enoch and Night Trooper Build Costume References Link Here

Enoch Enoch was a Night Trooper that served as the Captain of the Guard for Grand Admiral Thrawn's forces on Peridea. Enoch 3D files Helmets Galactic Armory - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Cults Link Here mcflyprint3D - Facebook: Link Here Etsy Link Here Instagram Link Here PewPewCrafts - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Cults Link Here Big Fred's Customs - Facebook: Link Here Patreon Link Here Etsy Link Here DO3D - Facebook: Link Here Website Link Here Vek3D & Walsh3D - Website Link Here Enoch 3D files Armor Galactic Armory - Facebook: Link Here Patreon Link Here Website Link Here mcflyprint3D - Facebook: Link Here Etsy Link Here , Instagram Link Here PewPewCrafts - Facebook: Link Here Patreon Link Here Website Link Here Etsy Link Here Cults Link Here DO3D - Facebook: Link Here Website Link Here Shoulder Strap 3D files printed in TPU https://www.whitearmor.net/forum/topic/57810-rogue-one-tk-shoulder-straps/ Soft goods Sheev's Emporium - Facebook: Link Here Gloves Keep Trooping (Formerly Imperial Boots) - Website Link Here Endor Finders - Website Link Here Boots Keep Trooping (Formerly Imperial Boots) - Website Link Here Crow Props - Website: Link Here Blaster Imperial Arms - Facebook: Link Here, Website Link Here, Instagram Link Here NOTE: Production Time - As each blaster is custom-made to order, please allow for an extended production time, which may vary depending on the specific item. Big Fred's Customs - Facebook: Link Here Patreon Link Here Etsy Link Here Facebook Build Group Enoch and Night Trooper Build Night Trooper Build Costume References Link Here