Jump to content
LTM

F-11D (The Imperial Factory, 5th Horseman files) and with BlastFx

Recommended Posts

After building the fantastic SE44C from Imperial Factory with 5th Horseman files, had to get the F-11D version. 

 

As I want to use the BlastFx, I will deviate and include the screen on the counter. Figure I can overlay with a blank later, but it is too cool not to include it (I have one on my E-11). 

 

Here are the parts after cleaning (you dont need to sand anything!).

 

 

V4mAqyE.jpg

 

  • Like 4

Share this post


Link to post
Share on other sites

First coat of primer. Will have to assemble in order to fit the electronics, then disassemble for painting. 

1dVB91f.jpg?1

  • Like 1

Share this post


Link to post
Share on other sites

Awesome! I'm very excited to see this. I was about to order the same thing but wasn't sure about going with the screen on the counter or not.

 

Share this post


Link to post
Share on other sites

Assembled the main components so I can figure out where to place everything. Only a few pieces glued, the rest are screwed together.

s9RNxhC.jpg

I like how the barrel can be removed for easy access

xkwfIxF.jpg

Need to make the trigger functional, will have to make my own spring

8yFlJRw.jpg

Will place the screen and wiring in the scope, possibly will need to cut it at the bracket

ovt1XZT.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Look at the thickness of the walls, this blaster feels as if it was real.

3ujbXfi.jpg

Will have to route wires through the mounting block

OhiGISb.jpg

  • Like 2

Share this post


Link to post
Share on other sites

Lookout great, Lou! Someday when I'm done with my TK, HWT, and T-21 builds I'd like to do one of these 5th Horsemen blasters. That and some Mando stuff. Goodness my to-do list is long. Looking forward to seeing your final product!

  • Like 1

Share this post


Link to post
Share on other sites

Started with the scope. Switch will be on the top, so had to cut the scope in the middle. 

3TQBgx0.jpg

 

Switch in the scope

G4wpzNd.jpg?1

 

Need to drop the lens into the housing

puve0BE.jpg?1

 

Complete

iUoAuOn.jpg?1

  • Like 1

Share this post


Link to post
Share on other sites

Wanted to drill out the holes so I had an option to see red light (very small amount), not cannon but cool and can turn on/off as needed.

r7sX8db.jpg

Whoops!

aKJDgu5.jpg

Replaced with brass tubing

uY5bavF.jpg

Gutted!

QhTwBO4.jpg

Pew Pew button

HnduYz4.jpg

Now with more pew-pew

NHgHNsa.jpg

  • Like 3

Share this post


Link to post
Share on other sites

Finally getting some time to work on this, but now at the painting phase and white seems to take forever to cure. Wasn't too happy with the chrome I used on the other blaster, so this time base coat of black. 

 

jc6SRra.jpg

 

  • Like 2

Share this post


Link to post
Share on other sites

Anyone know if the front site is chrome or black?

Share this post


Link to post
Share on other sites
27 minutes ago, LTM said:

Anyone know if the front site is chrome or black?


Both!  ;) 
50047514533_e27b9309a5_o.jpg

  • Like 1

Share this post


Link to post
Share on other sites
On 6/26/2020 at 3:49 PM, Cricket said:


Both!  ;) 
50047514533_e27b9309a5_o.jpg

Thanks Christine! Any link to the reference, could use that to confirm the rest of the build (looks like 3d printing).

Share this post


Link to post
Share on other sites

Still plugging away between work and home projects.

 

Got the speaker to sit in the breech and point forward

qIuRaQ8.jpg

 

Order came in, now I can extend the wires. Started the painting process, everything has one coat but the white takes forever to cure. Once I finish the final wiring, I will break it down and put on a finish coat.

TztCRpE.jpg

  • Like 2

Share this post


Link to post
Share on other sites
22 minutes ago, LTM said:

Thanks Christine! Any link to the reference, could use that to confirm the rest of the build (looks like 3d printing).


Sure! That came from @The5thHorseman F-11D 3D print build PDF.  He is a stickler for accuracy.
 

Trust Germain, you must!  

 

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...