themaninthesuitcase

That looks like a filler panel behind where the back plate would normally fit.

The email newsletter is based on being opted in. If you go to your account settings you can check your settings there:

We can only see interest we know about. If they haven't approached us then we can't know they want us to finish off the CRL. If there are indeed 3 builders it would really help for them to come over to the forum and show us where they are with their builds. I will try and find some time in the next week or so to review and align the CRLs.

Yes. There's not really active interest in this CRL so it's been parked whilst we work on Enoch. This alignment is on a to-do list for this term, and any active interest would nudge this up the priority list.

Hi @azoroes some how missed your post. I've requested the staff/DO to do a quick agreement test and pending that we can progress with a full set of images whilst we wait for the LMO to come back online after the elections.

Welcome to the FISD! Make sure you check out or Level 2 EIB program https://www.whitearmor.net/forum/forum/95-expert-infantry-program/

Welcome to the FISD! Make sure you check out the level 2 (and 3) programs once you get your basic clearance.

Congratulations!

I see the issue with the forearm now. The image on the CRL is actually correct, there are 3 stripes it's just not very obvious as it's 2 different arms in the image. https://databank.501st.com/databank/File:TK_incinerator_forearms.jpeg It can't be the same arm as if they where rotated the same then the cover strip trim angles don't match. So it's both cover strips and one in the middle opposite the "bump". This is not correct however: It should be: Special unit details in red shall be present in the form of three vertical stripes, running the length of the forearm. One in the front and one in the back (cover strip area), and one between the cover strips on the smooth side of the forearm. For the bicep something like: Special unit details in red shall be present in the form of two vertical stripes, running the length of the bicep. One in the front and one in the back (cover strip area). There is a red band around the top of the inner side of the bicep. That's an easy enough fix for us. We will need a new image for the bicep though. Once the LMOs are ratified for the new term we can get this one updated.

Welcome aboard trooper!

Hi, not sure what you are asking? At the moment there are no plans to change the CRL for this costume. Are you saying the CRL doesn't match the reference and we need to make changes? I can't see any issue with the forearm, it's just rotated different as it's a 3D model. But does look like the bicep should have some more red applied on the "inner" side. We can update the CRL but would need a new image to do so. I can contact the LMO once they are in office for the term.

Most here are the opposite, happy to play with plastic but my patch hoodie has been sat with out patches for about 4 months now!

Worth mentioning that image you have here is the modern Rogue One/Anthology suit. This was manufactured using casting techniques and generally is replicated using 3D printing. Most of the generally available armour will be the older Original Trilogy style, more specifically A New Hope or Empire Strikes back. These are vacuum forumed parts, with a latex hand plate. Without knowing the need this may or may not matter for your build.

From a cursory glance it looks broadly ROTJ based like many of the games are. Helmet possibly ANH, proportions are a shade off on that and a few other bits. Plus there’s a few odd ball bits and pieces here and there. If this is something you’d seriously like to take forward then we can speak to LMO about getting it going.

FISD flash logo coaster File-Name: FISD.3mf Last Update: 02/2025 Description: A simple coaster featuring the FISD Beret Flash logo as it's the simplest to print well. This is a 2 colour design, so you will either want a multi colour capable printer, or you're going to have to do it by hand. The black is only 2 layers thick, so it's only 3 changes which isn't unreasonable. Print face down to get the best look, a textured plate will give a nice finish. I also backed the example print with adhesive EVA foam. File is from Orca slicer, but it's just a 3mf so should work in all slicers that support it. Terms of Use: Nobody is allowed to sell these. There is no permission to recast and resell this design. You can print it for yourself, for your friends, garrison or squad mates, but you have to give it away. No money involved 👍 Image: Printed with a 0.4mm nozzle, a 0.2 will probably be able to manage the trigger and other details better but not tested. Maybe try "detect thin walls" if that is an option. FISD.3mf

Just took a Quick Look and there are no CRL entries for these atm so will need to go via LMO. That said weapons/accessories text is usually pretty minimal and these aren't too dissimilar to the FO ones, which could be used as a start point.

I like the trick with the elastic to webbing join. Not seen that before, clever.

Wow! Love a comprehensive build thread. Looks like you’ve been making some great progress. Cape looks great too. Love the bags I’ll need to make something a bit like them for my First Order build. Will also have to look into that sanding box. The amount of sanding dust over my work space says I need to!

Congratulations Trooper!

2026? So when some one new gets in?

Looks fantastic, good luck

Thank you every one. Another year of service.

If you look at the shape of the shins, as shown by the red lines, close you can see that it follows the natural leg shape too. It's just far more subtle.

The shins on Anovos was a fun exercise in working out. As stated you cant trust the markings. The way I found it easiest was to look at the line at the bottom if you look at the image in Glens post you can see the sides have a bias at the bottom when in the right place so that the "bigger" side is on the inside.

I've sent you a message with details of what the issue is and how we can look at resolving it.