gmrhodes13

These are only suggestions as most items will be fine for basic approval but you may have to adjust for EIB and Centurion if you want to go apply for those levels. It really depends on your GML (garrison membership liaison) if he/she would require them to be adjusted before approval so I'd check with him/her first as it is ultimately their decision. Side ab/kidney rivets would need to be removed, then the holes filled with ABS past, sanded and polished, here's a how to thread for ABS paste https://www.whitearmor.net/forum/topic/42866-how-to-make-abs-paste/ Then check spacing with references and redrill holes. You wouldn't need a new belt, you could reposition new snaps/rivets and adjust. Have a look at Tony's build, it's full of great detail https://www.whitearmor.net/forum/topic/35086-ukswraths-anovos-tk-build-stunt/

Nice work, looking much better. Could you also measure your TD, the gap between the centre plate and end cap looks a little narrow, You could also move the screws on the TD clips a little closer to the ends

Nice work, most should be fine for basic (depending on your GML) a couple of things you could tweak. Shins are at different heights. Also forearms have different gaps at elbows/wrists Shouldn't be any excess paint on your gums, here's some examples. Also a bit wide on the ends Ab button paint could be reduced a little Ideally tube stripes are a pencil width from the cheek Could tighten up the paint on the vocoder Could also bring the belt up a little so its just under the first button Check the spacing on your side rivets Belt could come a little more to the centre You may need a little heat on your calf closure to help it lay a little flatter Great work and good luck with approval

Congratulations and welcome to the EI ranks trooper

There are a few bits which are standing out, rather than one of us doing all the work for you what I would advise is looking through some of the recent approved centurion applications, you'll notice quite a few things, research is the key and it's part of reaching the higher levels. FYI you need to apply for EIB first Also go through the CRL pretty much most info on what is required is there http://databank.501st.com/databank/Costuming:TK_anh_stunt Good luck

Looking forward to seeing everything painted

Many of us use an online photo host there are many, my preference is Imgur, once you sign up for a free account you can upload images and either select and copy the image and paste directly into your thread here or select the "direct link" and paste that in, depends what device you are using.

For what ever reason a few slip through the cracks each year and the automated system isn't foolproof, if you have had issues in the past I would definitely recommend contacting the DL Sarah @Alay and asking for a manual update

I'm not sure were they are based but I know off hand in some cases I've waited 3 to 4 weeks for shipping from other countries, plus any hold ups in customs. I've not always received tracking or details when armor has shipped from several makers. I've seen recent posts from them with kits shipping and some spare in hand so cross fingers it appears very soon.

Congratulations and welcome to EI trooper

Yes there are a lot of Hasbro E-11 builds many with the add on Doopy Doo's resin pieces which make them a little more accurate. I also cut off and replaced the front barrel so it was the right length and had the open holes I'll have to upload some new images https://www.whitearmor.net/forum/topic/20496-hasbro-e-11-conversion/ You can find quite a few build threads here https://www.whitearmor.net/forum/forum/127-anh-blastech-e11/