gmrhodes13

Congratulations trooper and welcome to Expert Infantry and the EI Honor Gallery

Yes all of the photos are required

Link not correct, try this one https://www.501st.com/members/displaymemberdetails.php?userID=34714

Looks fine, just take care not to make pieces too small, I have really thin arms and legs and if I trimmed to fit they would look too small and weird compared to the rest of the armor, I have small pieces of foam in some areas. Some references

You should be ok with the belt and would be mentioned for L3, unfortunately it's a little wide and also has the velcro stitching showing, be pretty much impossible to have the angled corners meet the fabric belt as it's almost the same width as the plastic belt Just watch your spacing of armor pieces and make sure you have the same gaps both sides of arms and legs. Good luck and hope to see your EIB application soon

Congratulations and welcome to the ranks trooper. You can request higher TK access here

Congratulation trooper welcome to Expert Infantry and the EI Honor Gallery

Small drill bits and files is what I used. A couple of references of screen teeth

Not quite, the ends are on the wrong way to the main body, you had the body the correct way to start with, was just the ends which needed swapping Actually while you are there you may just want to check for any print lines, I noticed the endcap has quite a few, I'm sure the DO's will comment on it L2: 3D printed blasters can not contain visible print lines and must be sanded smooth for a more realistic appearance.

You can even have the white elastic a little further back so more shoulder strap is covered, this is good for when you stretch, may pop out just having the elastic on the one tab.

Nice to see you back with another version TK Todd. You may want to double check that scope assembly

Looing forward to seeing the photos

I found I had to add squirrel/blower fans in the lower corners (next to mic tips) which gave me a little more room as my Hero is very small in comparison to my Stunt.

Unfortunately some helmets are a little smaller than others, the opening you have seems quite a lot for the helmet, if you take off any more material you may find your face is easier to see by younglings. Could you get the helmet on ok before the incorporated fans?

AM "Daves Darkside" would be for the larger trooper, have a read here

You need to add a link to your membership profile, have a read of the first post

Great to hear, always easier when you have knowledgably troopers by your side to help with any tweaks or updates, troopers helping troopers

Nice work on the painting, vocoder looks fine to me, see if a dab of polish can just remove the small amount of excess remaining (lower corner)