Leaderboard

Having taken a short break to build my ESB helmet, troop, work on real life stuff... I'm back with some armor updates. Replacing the Ab-/Kidney Rivets Back in April, I got the following feedback after my EIB approval: This meant, I had to replace the rivets. I started prying the rivets off, only to irreparably damage said rivets. Therefore I had to buy new ones. Cue hours of internet searches, only finding wrong or overpriced options everywhere, until I asked an acquaintance if he knew where to find such rivets. He gave me different keywords and on my first attempt I found correct rivets. (Tovetis Zweispitznieten 8 x 9,5 8mm, if anyone's curious. 38cts/rivet). So here's what I did: I removed the existing strapping and rivets. I marked out a new cutline, cause I didn't like the old one. Cut to size. Marked up correct rivet placement. Filled in holes with ABS paste. Glued strapping back in. Then I added in the new rivets, first testing the whole process on a piece of scrap ABS, because I could do without repeating this entire process again, just because I didn't know how to set the rivets correctly. The new rivet placement was set precisely according to this: Afterwards I repeated the entire process on the abplate and then I painted the rivets white. I'll probably do some gentle colour corrections on the ABS paste in the future, due to the fact that my armor already yellowed a bit in comparison to the used paste. Adjusting the Chestplate Maybe it's just me slouching, maybe it's just something that I'd prefer to change for no other reason than the fact that I spotted it twice on some pictures, but I oftentimes got the feeling, that my chestplate was sitting a bit low, sometimes even catching on my an plate buttons (yikes). So to fix that I had to bring the chestplate higher up. Now, one way of doing that could have been a more rigid strapping at the bottom of the chestplate, such as the original strapping, but I moved away from that for a reason (less mobility and easier to pack). Therefore I had to pull it higher up by shortening the shoulder straps. Looks good, right? Had to heatform the shoulder bridges to conform to the new shape and loosen one of the elastic keeping my shoulder bell connected to the shoulderbridge strapping a bit, as the shoulderbells moved forward a centimetre, but overall I'm happy with the result, even if it was a lot of work that could have been avoided by having a better posture in armor Kidney-/Buttplate Strapping With me always sitting down in armor, it was probably inevitable that I'd get a crack in the return edge right to the screw, thanks to the original strapping in that part of my armor. Once it finally happened, I took out all the old strapping and replaced it with Glen's V-tabs instead. So functionally, I currently only have one plate of armor for both parts, and I got a pretty good gap between them thanks to it. Also, no risk of anything cracking -- worst comes to worst, the V-tabs will simply pop off and I'll have to reglue them. Boot Repairs Piece of advice: Photoshooting in the middle of the Netherlands in nature? Awesome. Wild growth? Dangerous for your boots. I must have gotten caught on a thorn or something with my boot during the shooting. Luckily, the local officers knew how to work with fabric of all kinds (shout out to ID-14445/Robin) and gave me the advice to simply go over it with some superglue. Worked really well, and with some additional help by a white outdoor marker, they look pretty spotless again. Other stuff I reworked my padding a bit, repaired some other things and am currently working on a trading card box. This weekend I'll have another troop, and I hope I can get a friend to check my thigh armor position and what I can fix without having to cut away (much), as that is the last to-do on my EIB Application Feedback List. Obviously, there's another few things that I might work on as well, but hopefully I'll continue on to my Centurion application within the next two months (no promises, I've got a few busy trooping weekends ahead, am still working on applications and will move again soon). Looking forward to any and all feedback!

Posting some more images of the model done by Deggial Nox. Also like he used my images as the references to compare the original vs his. I can see why he did the belt the way he did. If you notice on the in-game model, the thermal detonator is hanging off the squares on the belt, and his is able to mimic that (even though I do prefer the belt boxes to be its own usable thing), and like stated before the other rivet on the pauldron is missing. Some of the clone armor pieces also seem to be more angular and pointy, so its edges aren't as rounded as normal clone armor. Might just be copying the game model 1:1 or making it more stormtrooper like in appearance which I kinda like. Also liking all the models you're putting out @jaztermareal! Keep up the good work

left knee: https://www.thingiverse.com/thing:5410935

Took off the ears again to file and sand the edges just so it looks a little cleaner, then repainted the screws since the paint was rubbing off. Visor installed as well. I attached it to the screws sticking out from the ears and side of the helmet Nearly there! Just need frown mesh, either reattach the neck trim or get a new one since it’s a little ripped, then add padding.

Having just done the snaps on my AP set that I am building, there is definitely a learning curve to setting them. As many have recommended, I bought the Tandy snaps as you want quality ones to make sure they hold. I got the 100 pack and likely wasted 10 to 15 when I started with mistakes in setting them, there are lots of videos that show you how. From my experience, don’t hit the snap setting tool too hard as it will bend the snap post and offset the 2 pieces. Make sure you are on a solid surface. I used my garage or basement floor which is concrete. The circular motion with the setting tool is essential to get the snap post to flare out evenly. Just go slow with the hammering. justjoseph has a great resource in the all in one TK Index as Glen and Mario pointed out above.

Nice work. Don’t forget, you can always work on the return edge once the part is glued together. This way, you can try the piece on and see how much you need/want to remove. Also, when you size up the shins, be sure to wear your actual trooper boots - this is key. Many measure without wearing their boots, then find that they’ve not allowed enough room to fit the boots in. [emoji1303]

So quick update before I pack it up ready for the convention this coming weekend. I know it still has some things left I need to work on, but I fixed (or hope I did) most of what you guys suggested to me.

knee ammo boxes scaled and uploaded (1:1, 1:6, 1:12) https://www.thingiverse.com/thing:5410530 will scale and load the left knee after sleep

Going to have to replace the knee boxes now. lol. Looks more transitional with your parts and suggestions, Josh/Jazter. Epic. Also got that RotS chest gap thing going on with this mock up that I ripped from a mod by EldeBH. Edited down the Clone belt myself. As for the knee pad, IDK which way I'm going to go about it ATM. I want something that is "lore accurate" or "(prequel)movie accurate". I feel like the game interpretation is more or less nailed down and should get a CRL started up. So ideally a game CRL and a movie inspired look CRL. Quick mock up.

Degial seems to have missed the second fastener/button on the pauldron and there are too many stripes on the black section. Skylu's pauldron (from the Imperial Navy Commander Officer model) has no fastener/button but does have fewer stripes. Both have what I consider great interpretations of the backpack. EDIT: just noticed that Degial made the middle button on the belly square, when it should be round. otherwise it looks correct to my eyes. Don't feel bad about not having finished painting helmet let alone full armour, I have yet to make anything physical (recently became a dad so I can't have resin fumes from 3D printer in the room for time being and I do not have an FDM printer yet so for now all I can do is try to self learn CAD in the little spare I have and dream of making the 1:6 phase 3 clone figure I have wanted for so long. I won't even consider a costume until have that done.

Well, hopefully we can get close enough I know none of my stuff is gonna be perfect because I am limited by abilities as a learner but Luckily Boon (Skylu) and the good members here already got the most important and difficult part done: the helmet. I have just knocked together this left knee pad:

Also when in doubt check the gallery sections, lots of references there

Loving the details in this thread. You will find like many of the Stormtrooper game variants that some things are allowable due to not being able to source items exactly how is shown in reference/game images, but in this case making the files from scratch should definitely make this a screen accurate build and hopefully an easy run to a new CRL.

knocked together a new version of knee boxes in CAD:

looking over Degial Nox's model I think the belt boxes not quite right but overall I think it is pretty damn accurate. At first I thought his left knee pad was wrong as I think game devs intended it to be standard clone knee but in looking at reference pics I think the way it was by modeled Degial Nox is actually correct. He also got something else correct that I think I got wrong: the number of knee boxes (I thought it was 5 based on pics I used for reference, seems it was actually 6). no big deal as I should probably remake it anyway (my knee box model was remixed using existing 3d models before I learned to CAD, now I should be able to make a new one from scratch) Regarding gap between the chest and belt, Degial's seems to be correct to the game but I would love a ROTS style option

NEW In Memoriam Detachment Leader Deployment Office Merchandise & Officer Just For Laughs Update Your Build Threads Around the Detachment Celebration 2022 INFORMATION & AWARD PROGRAMS Common FISD Acronyms and TK Glossary Pre Approval Forum 3D Section Field Exercise Award Imperial Attaché Program Fire Teams EIB & Centurion: What do these terms mean? Need Help Ask the Deployment Officers Advanced Tactics Awards Public Relations Staff List 2020 Follow FISD Hans Larsson (TI/IC-18181) joined the New England Garrison of the 501st Legion in April of 2016. A quiet man, Hans was always one to step up and help out fellow Troopers however he could. He opened his heart and home to those of us in the New England; allowing Troopers to spend the night after a long days troop, offering to carpool with Troopers to and from events, and perhaps most importantly, pitching in when the NEG crafted a special armor kit for a young man we learned of through Make-A-Wish. The Legion was a creative extension of Hans' desire to help those less fortunate: in his home state of New Hampshire, Hans was active with groups that sought to assist Veterans and the homeless, and volunteered with the New Hampshire Special Olympics. Hans gave back to others in a sweet, gentle way and truly represented the ideal that all Troopers should strive for. Our condolences go out to his family, friends. "Buckets Off" Greetings fellow members, Hope everyone that went to celebration Anaheim had a sensational time, got to make some new friendships and put some faces to fellow troopers you have conversed with on our platforms. We have another great addition for you this month with several announcements which I shall leave to the various staff departments, but one of them is a section I take care of. Our 3D awards forum. For full details please see that section further down, but it gives me great pleasure to announce two well deserved awards. TK14082 Trooper96 Bryan receives another silver award for his continued updates on two of his offerings, L2A1 blaster and the M38 scope. this is Bryans 3rd silver award, congratulations sir. TK51923 BigJasoni Jason receive his first Silver 3D award for his R1 TK belt boxes, a nice upgrade to any of the new gen TK armours, congratulations Jason. Thank you to both these members for their generosity and dedication to our membership and the Detachment. Reminders: Please don't forget to check out the Members Choice Merch Poll. HERE Not only can you have a vote on a selection of possible merch items, but if you have any great ideas, please post them in the thread. Updates: Don't forget to check the Deployment officers section of this edition. We are making a CRL wide addition to all our costumes. This update will take place over the next week and will only affect our higher levels of approval. That's it from me, please enjoy our June 2022 news Letter. With Unquestioned Loyalty Andrew Franke TK11469 "Sly11" Detachment Leader 3D printed Weapons/accessories approval for Expert Infantry/Centurion As most of you are aware, resin weapon kits Doopy Doo's are very difficult to come by, there are still other quality makers of resin and aluminum kits available, both pre-built or as kits in E-11s and other items. US - Fieldmarshal (blasterfactory) - mostly metal parts Canada - Quest Designs - resin kit UK - TroopaCoola (JMC) - metal and resin (cast from original parts) On the other hand 3D prints seem to be the wave of the future. I for one say HUZZAH! There are some truly fantastic files out there to use (many are FREE) to either print your own or have a friend (or online service) do so. Building a 3D printed weapon or accessory can actually be a lot of fun, and something to do when you need to take a break from your armor build. BUT, please be aware that whatever type of item you are building must meet our standards when applying for higher levels of approval. In order to maintain screen accuracy, any 3D printed item submitted for Expert Infantry/Centurion approval cannot have visible print lines present. This will apply to all costumes, and has been added to the CRLs for each as a Level 2 (EI) requirement. Wh-wh-WHAT? Is this a new thing? Nope. We have been insisting on this since the onset of 3D printing, but now it's official. Eliminating those print lines is actually fairly simple, and will make for an awesome looking end product that you will be proud to troop with. If you have questions, we have answers, so feel free to hit anyone of us in the D.O. department up and we will be more than happy to help! With Unquestioned Loyalty Joseph Pedigo TK-10963 "justjoseph63" Chief Deployment Officer With Unquestioned Loyalty Mario E RT TK-48117 "TKSpartan" Deployment Officer With Unquestioned Loyalty Jose Maria Sanchez TK-30173 "Chemi" Deployment Officer Currently there is a poll running for a members choice Merch item. Please vote in the poll, or if you have an item that you'd like to see leave it in the comment! This poll closes on 1st July 2022, so get your vote in. Once the item has been chosen, we will work on design work, so keep that in mind as well! Poll Link "FISD Memes" Thank you to Luca "Morgi" TK66744 for starting a FISD specific meme thread, hope to see more of these in the future not only by you but by others as well. You can find the thread here WE NEED YOU TO UPDATE YOUR BUILD THREADS As most would be aware we are diligently working through the forums updating watermarked images, missing images and broken links, this has taken over a year so far and has been a monumental task but there is still a lot of work ahead of us. Members build threads are one of the biggest areas of watermarked/missing images and we are asking you the membership to help and update your build threads yourselves as this is just too big a task for staff. Build threads requiring updates are being moved over to this area https://www.whitearmor.net/forum/forum/241-build-threads-requireing-maintenance/ Thank you in advance for your cooperation. New FISD Tri Fold Brochure We have just launched our newly revised Detachment Tri Fold brochure. It's been quite a long time since we actually had these available and since then many things have changed leading us to updating some of the text to include new costumes, and have more relevant information. Originally these were done in a limited run by the member who created them, but nowadays, we have moved this to a print your own service making them accessible to all countries around the globe. Files are available to all full 501st members on request, and are completed in a very high resolution to ensure quality in a finished product. The thread can be found here for more information and how to access the files. Star Wars Celebration Anaheim 2022 Photos Photo by: Steve Lam, TKID878 "TK878" Download higher res here Photo by: Joe Booth, ID 89241 Download higher res here INFORMATION & AWARD PROGRAMS For a full list of FISD awards head here Are you new to the FISD and wondering what the heck all those abbreviations and strange sounding terms mean? To help you @justjoseph63 has started a list of the most commonly used ones that will give you some insight. If you have ANY questions about a particular term that is not listed or suggestions for new ones please contact Joseph. You can find the list here Pre Approval Forum allows future Troopers the opportunity to submit photos of their completed build to be reviewed by the Staff, Imperial Attaches and others in preparation for forwarding it to their GML for approval. Any and all advice/suggestions given will be specific, constructive, helpful and respectful. Please note that this program will NOT take the place of your local GML, as Detachments are not chartered for costume approval and can not override a GMLs decision, but is instead a peer review program designed to help you look your best and offer guidance and positive feedback. For more information on this program, please visit the link here Congratulations to TK14082 Bryon "trooper96" for earning his third 3D contributors award for multiple files he has produce and shared. You can check out his outstanding work HERE & HERE Also Congratulations to TK51923 Jason "BigJasoni" for earning his first 3D contributors award for his R1 ammo boxes You can check out his outstanding work HERE Don't forget to visit our 3D section when next surfing the FISD forums, there is plenty of useful information to potentially help you on your next TK adventure. You might be feeling may generous and share with our community a new TK related 3D file and maybe win yourself a 3D contributors award so check out the details below and be part of the in house 3D community. Here is a link to the FISD 3D Contributor program. Don't forget to create a troop log here on FISD and get awarded for your adventures The list of accomplished troopers keeps growing, so get on board and register your troops today Simply start (or update!) your troop log, keep the running total in the title, and post (at least!) a date and name for the official 501st event where you wore your TK! Once you've hit a milestone count, go over to the "Field Exercise Awards -- Post your milestones here" thread to request your profile be updated! Simple, right? Award Recipients May - June TK15028 "David G" David - TK15711 "Quinquer" Lluis - Are you an approved TK that spends more time on the boards than the average Trooper? Do you enjoy using your knowledge to help out future and existing Troopers? If so, we would like to invite you to join the Imperial Attaché program! Members of the I.A. team are chosen to help out not only those here on the boards, but on a local level as well. Our aim is to have at least one in each and every Garrison, Squad and Outpost in the entire legion to be the eyes and ears of the FISD on a local level. For a complete list of Imperial Attaches, go here Some of the benefits: Access to exclusive Attaché merch., including patches, IA patch , IA Rocker For a complete list of Imperial Attaches, go here You may also be in the running for an Imperial Attaché Award Imperial Attaché Award for those attaché's who have gone above and beyond [minimum 1 year of service]. You can find a list of prior recipients here Want to setup a "Fire Team? the Fire Team program is completely optional, and is intended to help form a common identity and spirit of camaraderie among 501st Legion Stormtroopers in the same geographic area/garrison that troop together. Fire Teams are not officially recognized by the 501st Legion nor the FISD, although they will be able to access a Fire Team sub-forum on the detachment website. You can find more information here So what exactly are and levels? These programs were designed for those who choose to take their armor above and beyond the minimum requirements for basic 501st Legion approval. It gives you the chance to show a level of dedication and pride that takes your armor closer to being as "screen accurate" as possible, without as much extra work as you may realize! You can find more information on the programs here ASK THE D.O.s For those of you who have a particular issue (or issues) before or after submitting for Expert Infantry / Centurion level approval, in order to get you an answer faster you can now privately contact the entire Deployment Officer team at one time! Questions about fitting, repairs, CRL standards/requirements or anything pertaining to reaching Levels 2 and 3 are not only welcomed, but encouraged. Keep in mind that no question is too small, and that your queries will only be seen by the D.O. Staff. We are here to help in any way we can, so please feel free to send us a message by clicking on this link: @Deployment Officer Team and we will get back to you A.S.A.P.! This area lists all those who have gone above and beyond basic approval toward screen accuracy and obtained EIB or Centurion or both. FOR May - June the 1st Imperial Stormtrooper Detachment would like to congratulate the following. Expert Infantry Badge Award: No awards this month You can find a list of multiple award recipients here --------------------------------------------------------------- Centurion Badge Award: No awards this month You can find a list of multiple award recipients here If you see any of these Troopers around your Garrison or Squad, be sure to congratulate them! Newsletter Editor If anyone has any content for the newsletter please contact me via PM For anyone interested in having a look through any of the older newsletter they have now been moved to a new archive sub forum which you can find Here With Unquestioned Loyalty Glen "Q" Rhodes TK-85421 "gmrhodes13" PRO Newsletter Staff List 2022 -2023 Detachment Leader (DL): Andrew Franke (Sly11) TK11469 Executive Officer (DXO): Steven Sheades (starsaber25) TK-10466 Chief Deployment Officer (DCA): Joseph Pedigo (justjoseph63) TK-10963 Deployment Officer: (DCA): Mario E RT (TKSpartan) TK-48117 Deployment Officer: (DCA): Jose Maria Sanchez (Chemi) TK-30173 Provost Marshal (DCOG): Dan Branton (CableGuy) TK-42911 Provost Marshal (DCOG): Tim Waychoff (Dark CMF) Provost Marshal (DCOG): Chris Pearson (themaninthesuitcase) TK-10911 Merchandise and Branding (DMBO) James Silvius (jsilvius) TK- 12953 Personnel Officer (DPER): AC (Novatie) TK-5597 Fire Team Relations (DPRO): Mark Ryner (Captsafe66) TK-4584 Content Editor At Large (DPRO): Christoph (Danny) Lauber (Ripper_L) TK-55550 Content Editor Support (DPRO): Tony Jobe (ukswrath) TK-10116 Content Editor Awards (DPRO): This will be handled by the XO Newsletter Publisher (DPRO): Glen Rhodes (gmrhodes13) TK-85421 HOF Director (DPRO): Aaron (Bronx) Gibson (Pyrates) TK-99725 Attaché Ambassador (DPRO) Frank Peranteau (Frank75139) TK-75139 Social Media Relations (DPRO): Teresa Nuthall (Soulart) TK-41307 Social Media Relations (DPRO): Justin Reed (TheRascalKing) TK 61490 Systems Administrator (DWM): Eric Brager (Darth Aloha) TK-9674 Systems Administrator (DWM): Mathias (Locitus) TK-2959 Detachment Founder (DF): Paul (Daetrin) TK-8020 Trading Cards Content Support (IPM): Eric Ho (Hoda) TK 77520 Imperial Propaganda Machine (IPM): Brien Edick (Harbinger) TK 92802 Imperial Propaganda Machine (IPM): Jeff Salt (wingnut) TK 50297 Imperial Propaganda Machine (IPM): Richard Tibbitts (CallMeMrTibbles) TK 46116 Imperial Propaganda Machine (IPM): Adam Wolf (revlimiter) TK 89400 Imperial Propaganda Machine (IPM): Daniel Melin (TheSwede) TK 99665 Imperial Propaganda Machine (IPM): Jim Ferrell (Rat) TK-95970 Facebook: www.facebook.com/whitearmor Facebook Group: 1st Imperial Stormtrooper Detachment (FISD) Official Twitter: www.twitter.com/FISD501st or @FISD501st Instagram: www.instagram.com/fisd501st On behalf of the 1st Imperial Stormtrooper Detachment Command Staff and the Imperial Propaganda Department

I just see it as an E-11 but because it's an old low poly game it's oversized. I chuck it as a game limitation/oversight/graphical issue for that period of game development. Considering how the Phase 3 is vastly Clone inspired as is, it leans in towards the Stormtrooper aspect more if you go with the E-11 and balances out more. "It's like poetry, it rhymes".

Looking good, one thing you may want to compare is your detonator spacings, not much of a gap between the control panel and end caps Reference

As for the eventual 1:6 figure (when I can finally 3D print again... some day) I am still thinking about what blaster I would use. If going by what looks good and is correct for the very early Empire, I think standard clone DC15S would look good or the ROTS DC15-X (the DC15 A/S hybrid from the 501st temple march during order 66) but obviously neither blaster was used by the Phase 3 clones in TFU so it would not be accurate. Inaccurate but cool. If going by game devs intention then ANH style E-11 is likely accurate to what they intended but doesn't match the in game look since the game model blasters were HUGE. That leads me to the 3rd and most game accurate option: An oversized E-11 (call it early Empire proto-E11) in which case I could probably just use the oversized E-11 blasters from my old 90's Kenner 12 inch figures since they were suitably massive. It would give them new life: instead of obsolete oversized "parts box" filler they would be TFU proto E-11's. What are the opinions of all ye?

Well I did mention this forum to him on Discord. Thank you guys for all the parts and resources. These bois are epic. Love sharing in the fandom here.

repurposed the shoulder straps that came with the kit. Going to attach to the shoulder bell with Velcro to start with, and left some webbing to put the snap through on the other end. Glued in some elastic for the strap around the bottom. left side reverts are ready to glue in place, once I’m happy with the seam and any paint I end up using on the off colored shims…

Welcome aboard Mark!

Have my helmet painted to Mr No Stripes CRL now. LOL I beefed up the vocoder as recommended by @CableGuy to give it more of the stunt look. How are the teeth and gums? Any corrections I need to make if I am going for centurion?

Hello Mark and welcome to FISD. Glad to read you have made your research and your goal is level 3 . Looking forward for your BBB Day and Build Thread. Remember we are here to help every step on the way. Ask all questions , post photos. Take a look to the index provided by Glen there you will see the 6th tittle Strapping Systems .

Hello and welcome aboard, great to see you have done some research, here is a great thread full of info and snap setting Looking forward to seeing your build progress.

Nice job on those tweaks, Luke. As Glen mentioned, feel free to have a chat with your fellow troopers if you want to make further upgrades etc. Have a great troop at the convention. [emoji16][emoji16][emoji16]

Looking better, still needs some tweaks here and there but I'm sure once you around other 501st members they can point out a few things, have a great time at your convention

1. What are general opinions of doing inner cover strips? I used to add them but really found they are only needed on pieces that take any strain, the shins as you are constantly opening and closing so I recommend adding them there on the inner front. 2. When people talk about adding some padding inside the armor pieces, are they talking about foam? Yes normal foam, I have them in my arms pieces and thighs, darn these skinny arm's and legs 3. If I end up getting the forearms glued, and the part by the wrist still isn't quite oval-shaped enough, is this something a hot water bath will help with or do I need to really make sure it's perfect before gluing it all? Personally I find it easier to use heat once all the cover strips are added. I use a heat gun BUT you need some practice, you can go too hot too quickly hence why many use a hot water bath.

Hello and welcome to the forum, hopefully you will eventually see your armor. As posted above most go with a 3D printed blaster. Although we don't support recasting but as Anovos is no longer a company, there is someone who did take a mold of the Anovos F-11D and is currently selling resin ones , he has a thread here for his E-11's so you may want to contact him via that thread or on one of the FOTK build groups on Facebook Imperial Supply Drop.

Hi Jeffrey, welcome aboard and hope you receive your armor soon. Take a look to this threads for F11-D Looking forward for your BBB day. Good luck

Sorry to hear you had to wait, but glad its all coming together for you. Im no expert on F-11 blasters but there might be some 3D printed ones out there.

Location Garrison/Squad Attaché Attaché contact Area served/Armor/Offices held ARGENTINA Garrison Argentina Needed ------ ------ Squad Rosario Needed ------ ------ Rio de la Plata Squad Needed ------ ------ Dark Side Warriors Squad Needed ------ ------ AUSTRALIA Desert Scorpion Garrison Glen (Q) @gmrhodes13 Perth, Western Australia ANH-S/ANH-H/ESB/HWT/TFA, TLJ/TLJ-E/TFU/TKC/DTH, D.S.G GML, GWL, GWM, GEC Expert Armorer ** ** ** Knightfall Garrison Rudi @tarok Melbourne ANH-S GXO, LMO ** ** ** Chris @Slouch Melbourne ANH-S, GEC ** ** Redback Garrison Andrew @Sly11 Brisbane ANH-S, Former FISD DL, XO, GCR, Armour/Blaster Builder ** ** ** ** Longfin Squad Needed ------ ------ Razorbacks Squad Needed ------ ------ Venom Squad Needed ------ ------ Southern Cross Garrison Matthew @Mworm1974 Sydney ANH-H, Armorer ** ** ** ** Hunter Hornet Squad Needed ------ ------ Black Tower Squad Needed ------ ------ Southern Dewback Garrison Needed ------ ------ Thylacine Outpost Troy @TK20187 Hobart, Tasmania ANH-S ** AUSTRIA Austrian Garrison Needed ------ ------ Upper Austria Squad Needed ------ ------ BELGIUM Belgian Garrison Flanders Dragon Squad Ilan @TK-40996 Arendonk ANH-S ** ** Tornacum Squad Needed ------ ------ FanWars Garrison Manu @berodrim Hannut ANH-S ** BRAZIL Brazilian Division Garrison Kuat Drive Yards Squad Needed ------ ------ Death Valley Squad Needed ------ ------ Death Star Garrison Needed ------ ------ Imperial Coastline Garrison Needed ------ ------ Novo Império Garrison Needed ------ ------ Centro-Norte Squad Needed ------ ------ Squad Nordeste Needed ------ ------ CANADA Atlantic Garrison Needed ------ ------ Badlands Garrison Aaron @Pyrates Alberta, Saskatchewan, Manitoba, B.C ANH-H/TFA, Blaster Construction & Armour Maintenance / Repair & Liberation of Candy, GML ** Renegade Squad Needed ------ ------ Crimson Aurora Squad Needed ------ ------ Canadian Garrison Brad @68Brick Hamilton or Toronto ANH-S ** ** ** ** Robert @Twosolitudes ANH-S ** ** Gerald @Doggydoc Kitchener, Southern Ontario ANH-S, DO ** ** ** Vindicator Squad Needed ------ ------ Capital City Garrison Mark @sylverbard Ottawa ANH-S, Anovos Expert (Alpha75) ** ** ** Forteresse Imperiale Garrison Needed ------ ------ Outer Rim Garrison Chris @R2Chris Vancouver, BC area ANH-S ** ** Ravinak Squad Needed ------ ------ CHINA Chinese Garrison Needed ------ ------ COLOMBIA Colombia Garrison Mario @IRoS Bogotá TKC, GML** ** Zabrak Squad Needed ------ ------ Pacific Thunder Squad Needed ------ ------ Mudhorn Squad Needed ------ ------ COSTA RICA Costa Rica Garrison Mario @TKSpartan San José/Liberia ANH-S Chief Deployment Officer ** ** ** ** CZECH REPUBLIC Czech Garrison Needed ------ ------ DENMARK Danish Garrison Needed ------ ------ ECUADOR Ecuador Garrison Needed ------ ------ Guayaquil Imperial Squad Needed ------ ------ 2112 Squad Needed ------ ------ FINLAND Finnish Garrison Tommi @TK-20507 ANH-S ** FRANCE French Garrison Jean Louis @JEAN LOUIS Coubron, Paris area RO ** GERMANY German Garrison Arma Candida Squad Needed ------ ------ Coastal Hammer Squad Christian @Novak Dimon Wilhelmshaven ANH-S, Armor/E-11 expert ** ** ** Luca @Morgi Kiel ANH-S/ESB, DPRO ** ** ** Torben @Tall_Trooper Göttingen ANH-S, FISD IPM ** ** Custodes Euroi Squad Christoph @Ripper_L Nuremberg ANH-S/ESB. Editor at Large, FISD Diplomat ** ** ** ** Echo Nova Squad Needed ------ ------ White Shadows Squad Tino @T-Jay Cologne/Dusseldorf ANH-S, E-11 Expert ** ** ** ** Freddy @Freduster Düsseldorf ANH-S, Armor Expert & E-11 Expert ** ** ** HONG KONG Hong Kong Garrison Needed ------ ------ HUNGARY Hungarian Garrison Chimaera Squad Needed ------ ------ Pannon Squad Needed ------ ------ ICELAND Icelandic Garrison Needed ------ ------ INDONESIA Garuda Garrison Indonesia Wibowo @swibowoj Jakarta ANH-S, former GWL/GCO ** ** ** ** Adi @Bazz Jakarta City ANH-S/TFA ** ** ** IRELAND Ireland Garrison Needed ----- ------ ITALY Italica Garrison SubZero Squad Needed ------ ------ 77th Alpi Squad Davide @lorddavids Genova ANH-S, Armor Expert ** ** 3T Squad Needed ------ ------ Sqvad Praetoriana Needed ------ ------ Trinacria Squad Needed ------ ------ JAPAN Japanese Garrison Brian @Bulldog44 Tokyo ANH-S/TFA, Former GXO, Blaster Expert ** ** ** ** Asa @SgtGarand Okinawa ANH-S ** ** Robert @husky68 Tokyo ANH-S ** Arthur @giskard8 Tokyo ANH-H/ANH-S/ESB/TKC/TKS, Former Hong Kong XO, GCR, DCoG ** ** ** ** MALAYSIA Malaysia Garrison Needed ------ ------ MEXICO Bravo Garrison Needed ------ ------ Mayan Garrison Needed ------ ------ Mexican Garrison Imperial City Squad Needed ------ ------ Crimson Squad Needed ------ ------ Baja Squad Needed ------ ------ Wampatrol Squad Needed ------ ------ Rancor Hunters Garrison Needed ------ ------ Inquisitor's Squad Needed ------ ------ Centauros Squad Needed ------ ------ Skull Garrison Bantha Riders Squad Needed ------ ------ Green Bellies Squad Needed ------ ------ NETHERLANDS Dutch Garrison Daphne @AthenaIII Middelburg TKC ** ** ** NEW ZEALAND Outpost 42 New Zealand Garrison Georgia @Georgia Haywood Auckland ANH-S, GWL ** NORTHERN IRELAND Causeway Garrison Needed ------ ------ NORWAY Norwegian Garrison Even @Bobafett75 Oslo ANH-S ** PERU Garrison Peru Needed ------ ------- PHILIPPINES Philippine Garrison Dennis @NINJAM0VE Manila ANH-S/ANH-H/ESB/TKS, GML Expert Builder, Blaster Builder, Paint/weathering works ** ** ** Cebu Scarif Garrison Needed ------ ------ POLAND Polish Garrison Pomeranian Squad Needed ------ ------ Polonia Minor Squad Needed ------ ------ Greater Poland Squad Needed ------ ------ SINGAPORE Singapore Garrison Needed ------ ------ SPAIN Spanish Garrison Balear Squad Carolina @tigresa Mallorca ROTJ, Expert Assemble, Repair, Squad Leader ** ** Canarias Squad Jason @TK27022 Canary Islands ESB ** ** Castilla y León Squad Chemi @Chemi Valladolid ANH-S, GML, Deployment Officer ** ** ** ** Escuadrón Sur Needed ------ ------ Galicia Squad Needed ------ ------ Imperial Capital Squad Needed ------ ------ North Wall Squad Needed ------ ------ Squad Cierzo Needed ------ ------ Tercio De Levante Needed ------ ------ SWEDEN Swedish Garrison Trinity Squad Jonatan @Nairy Stockholm ANH-S/ANH-H, Former DPRO, Current Attaché Ambassador, GML/GXO ** ** ** SWITZERLAND Swiss Garrison Needed ------ ------ TAIWAN Taiwan Garrison Needed ------ ------ Takau Squad Needed ------ ------ THAILAND Thailand Garrison Needed ------ ------ UNITED KINGDOM UK Garrison Chris @themaninthesuitcase London (St. Albans) ANH-S, DXO ** ** ** ** Marc @Troopacoola Manchester ANH-S, Armourer ** ** Imperial Welsh Squad Needed ------ ------ Imperial Scottish Garrison Paul @Sithping Glasgow ANH-S ** **