Leaderboard

Forming the clips for the forearms Yes, a Smuckers jelly jar works great The one in the background has not been formed yet so you can see the comparison…

Looking good Ben!

Hello and welcome to FISD.

Thank you brothers, we try as much as possible. Geroyam Slava!

Ok finally getting around to posting more on my progress. I cut more abs the shape of the yoke arms hoping to reinforce it.

I'm sure Shane won't mind me adding these Anovos resources below, since his build is of the same maker, but hopefully these can be helpful to you, Mike. ukswrath (Tony) - ANOVOS (Print PDF by harris.adp) Harbinger (Brien) - ANOVOS kman (Kalani) - ANOVOS Uxorious (Fredrik) - ANOVOS Rat (Jim) - ANOVOS

I fitted and glued the back end and main body of the DLT-19. This is ready for sanding and filler. Also cut and fit a wood dowel to strengthen the barrel. Glued and epoxied the first section of the barrel. Then I set the dowel in E6000. Going to let it dry and cure for 24 hrs. Top pick is a test fit.

I like to use "poor mans fibreglass" for repairs. It's quick and very solid. I try to tack the fabric in place first with a few dots, then once happy flood it afterwards. Don't be tempted to use accelerator though, it can yellow the armour.

Bluetooth transmitter turned up today. Works perfectly. Far better than having wires to deal with when putting my helmet on. Here's the link to the transmitter and receiver cable for my in ears monitors. KZ APTX HD Lossless Transmission CSR8675 Bluetooth Module 5.0 Wireless Upgrade Cable Detachable Cord (B PIN) https://www.amazon.<abbr title="Commanding Officer">co</abbr>.uk/dp/B07RP8PM8P/ref=cm_sw_r_apan_glt_fabc_5FAHG5EZMADBEXQKYDED TROND Bluetooth V5.0 Transmitter Receiver, 2-in-1 Wireless 3.5mm Audio Adapter, AptX Low Latency, Smart Codec Indicator, 2 Devices Simultaneously, for TV, Home Sound System https://www.amazon.<abbr title="Commanding Officer">co</abbr>.uk/dp/B01K8ANDCI/ref=cm_sw_r_apan_glt_fabc_5S1Q87KFJE79YT1MBX70?_encoding=UTF8&psc=1