TKSpartan

Hi , great to see you had made the effort, for a personal goal and satisfaction , it's worth it, believe me . starting your review.

Congratulations Max!!

Congratulations Max !!! Well done ,welcome to Centurion ranks

Congratulations Grave!!!

Awesome Max!! glad you took the challenge , and had great support from Justin @TheRascalKing

Congratulations Trooper !! Welcome to Centurion ranks!!

Hi Alex, looking forward for your BBB day. we are here to help.

Welcome to FISD Trooper, we are here to help. Good luck

Hi Devin, great advances with your helmet ! The vocoder looks good as you can see in the references , and the ears small gaps are normal and the ears small gaps are normal If I can make some suggestions : The teeth paint can be improved a bit as per the crl for basic approval. just a couple of minutes with a pointed tool to remove the excess of paint. CRL: Frown is painted gray and does not leave the teeth area... If you are planning to go for higher levels (EIB and Centurion) you may want to move the tube strips a bit closer to the cheeks. CRL : Ideally, the tube stripes are positioned approximately a pencil width from the side of the cheek. keep on doing a great work.

That forearm looks good Steven, If I can make a suggestion, it would be to trim all the Shoulder bell's return edge, or at least the more you can to gain some more room and get it closer to the shoulder bridges. Some references here. You're doing a great work !

Hi Devin, congratulations for your BBB day, looking forward for your advances . Post tons of photos , ask questions and remember "measure twice or more, check the reference images, cut and glue just once". Good luck !

Hi Grave, thank for your Centurion application. One of us will be with you shortly. Added to process line

Hi Trooper Welcome to FISD !!

Thank you sir

Hi Justin, I'm currently working on your review and I'll need you to do me a favor. Could you please update your Helmet's inside photos with the correct blue mesh material installed on your the tube vents? I know you have already done the fix, but for future references we prefer the updated photos. Thank you !!

Hi Devin, welcome to FISD. looking forward for your BBB day photos.

Hi Chris, You should cut the same. I strongly suggest you to take a look to this post. It could be so useful in this stage of your build.

Hi Rob, welcome to FISD

Let me say, Wow just wow. really amazing helmet and great building thread. Congratulations!!

Good Luck !

Good luck Thomas, looking forward for your advances .

Welcome to FISD, looking forward for your photos.

Sounds good

Hi Steven, in my experience, I use only the outer cover strips with no problems at all. And if you are using E6000, a bit of glue on your magnets/clamps wouldn't stick them even with 24 hours drying time. you can easy take them off just pulling. This is what I usually do to glue the forearms cover strips, and when it dries, you feel like the wood pieces , or magnets when I use them, sre stuck, but just pull it them out and clean the excess of glue by rubbing with the thumb. One tip is to place painter's tape in the inner side , like it was an inner cover strip to keep the pieces together and to avoid the glue to spread inside.

Hi Ardeshir, Great to know, as expected , you're working on the L3 requirements. About your question, for the review we consider both, CRL and as much reference images as we can see. This TD seam was posted as a suggestion only according to the screen captures and reference images. Yours is, indeed, a great armor build and it's all about your preference to leave the TD as it, this won't be a L3 blocker in no way brother. keep on doing a great work Ardeshir and looking forward for your Centurion submission soon , keep it up !!