TheSwede

Nice! (yep, this time I´m sure)

Looks great

looking good

Just having some fun

But....it doesn`t look as good so I would avoid that unless absolutely necessary

Center the cover strip over the seem and you are good to go And so there`s no confusion, the cover strip ends above the raised edges (see RS suit for reference) so the gaps at the bottom thighs will still be visible and my advice is to glue some scrap abs on the inside and abs-paste from the outside and sand it smooth in order to make your suit look its best

Looking good - all of it

No, if you need a bigger than the Canon width of 20 that`s ok - for all levels of approval....I would however try and avoid going bigger than 25 though. Here`s how I did: I trimmed the rough edges of the thighs and using tape overlaped the front so the raised edges were 20mm, then butted up the the back (also rough trimmed, only removing the flashing) and taped that up, sliding the thighs on (with undersuit), checked the fit and needed to go bigger so ended up with a 22mm coverstrip (front and back, I wanted the strips to match), also trimed as much that I could from the upper return edge, more from the inner part than the outer to maintain the illusion of thickness. I maxed out on my thighs so the back has a gap at the top so to strenghten the joint I used a small inner strip at the top. The Anovos suit has pre-cut (at least my shadow did) strips so that makes things more challenging, idealy the strip hides the raised edge but there`s room to "cheat" a little meaning it`s fine even though if a few mm is showing - keep going Fredrik, you`ll get there in the end RS suit for reference

TD tube is perfect

I am an Imperial Stormtrooper and I would not hesitate to sacrifice myself in order to save my brother (play Imperial march for effect)

Tell her there can`t be victory without sacrifice (not sure that would help though)

Congratulations and welcome to the Legion Trooper

It looks good and like Tony said you don`t really need to fix anything unless it bugs you, and...as you say it will pain you to alter the canon strapping I say leave it as it is, you have the mobility needed and as I said earlier, you can alwas change it at a later date after some "test-runs"

WOO! Happy second BBB-day

Send them pics in Trooper

Mobility and TK-armor doesn’t go well together so by the sounds if it you got it as good as it gets...you could always trim some more at the neck for more comfort but as you say standing strait is fine I would leave it for now, can always come back and trim more after a troop or two....walking and putting on/removing the helmet on your own is a good reference point to have

Happy B-day

Imperial warfighters (FB) has a great rubber blaster for Centurion level and at a great price

It’s all coming together

Would it be possible to include a half/half helmet? And I´m in favor of option B:slightly round - overall good work

Wait wait...."nice" doesn`t cut it! They are awesome!

Yeah! very very nice

Happy BBB-day Doing a Sandtrooper I´m sure the guys over at MEPD would be thrilled to have you post a build there as well, you are most welcome here though

Wow awesome - well done

Trooperbay.com or eBay