Harbinger

Looks like built in thigh garter slots too.

FYI, if you trim ~1.5mm off a split rivet you can set it inside a line 40 snap:

My parcel arrived today, everything accounted for, along with other bits I have been stockpiling for this build: Hope to start on the helmet soon!

Congrats!

A first wave/alpha 75 Anovos coin. I am fairly certain there isn’t an official Legion one, but one of the FB build groups may have made one.

Welcome aboard.

Welcome to FISD! (Didn’t know you could get degrees in prop building, very cool!)

Don’t know about that either but these days you never know. I only keep track of official ones.

Not official ones, as far as I know.

Well, it only took me two years to circle back to this build. I ordered a Hero helmet kit and grappling box kit from Troopermaster during the holidays, which will be here very soon. Until then, work resumes on the other stuff! Got Joseph’s all-new Hero hand guards, in matte white (which is a closer match to the film ones): I used plenty of E6000 to get them glued to rubber gloves (stunt gloves for reference):

Yep, mailbox is the same. Something to make note of.

Hello and welcome.

Congrats!

I don’t really know if we should split it into two versions per se but at a minimum call out that either color sight is acceptable. The TLJ F-11 had some differences anyway if I recall.

Several of the TFA updates carry over as freebies due to the way the templates are built, more reference now so may need to make some things that are currently shared separate. PS: Feel free to split off if needed: One topic JAFO and I discussed after TFA updates was the F-11 picture was incorrect, should have a black rear sight for regular and white rear sight for the scaled-up version. He sent me some photos but I need to get them off of FB and into here, will try and do so this next week.

Welcome!

Welcome!

They are all canon but the large majority of Legion TKs are ANH Stunt.

Lots of differences: - hand painted vs decals for helmet details - black vs. gray teeth - different hand plate armor - holster is on different side, loop vs. rivet attachment - blaster differences - less greeblies Sure I'm missing more off the top of my head. Your best bet is to read the CRLs as they will spell out exactly what you need for each version: https://databank.501st.com/databank/Costuming:FISD_CRL

Final paintjob will thank your extra effort

Welcome aboard Matt.

The paste is cosmetic - you will need additional ABS backing behind the entire patch or it would fail spectacularly. That said, smaller gaps will be less noticeable but in my experience anything thinner than a couple of mm makes it hard to get the paste in the gaps.

Hello and welcome aboard.

That's weird because they sent me several hundred kits. Just kidding, nothing here either.

Agree, it’s the one I keep in my wallet.