Leaderboard

Hi everyone! I got a start on some strapping done. Using the template, I created twenty strips of strapping to glue inside the armour (as a start). As many have suggested, I used a soldering iron to do this—and HIGHLY recommend it! Not only did it make the task really easy, but it was also really satisfying. Simply poke the iron through the holes in the template and then run it along the edges to stop them from fraying. Then I hammered male Tandy snaps into the straps. I bought 40 pairs of male/female snaps, but since I'm doubling up on snaps, that'll only be enough for 20 connections. I'm expecting I'll need to order some more snaps. And lastly, I got the first few straps glued into place on the chestplate, backplate and shoulder bells. I forgot to take a picture of the chestplate, but it's essentially the same as that of the backplate. More updates to come! Thanks for your ongoing input. :-)

Been working on a side project, a 3D printable E-11 Grip. Here are the results. Alan

Omg omg omg! BBB is on the move. In Dallas! Having a glass of champagne with the husband to celebrate 15 yr anniversary and just spilled it all over myself in excitement

I give permission for FISD to repost my photos on social media in an appropriate fashion. Location: Seattle WA Event; Symphony Date: 10-27-2018 Garrison: Titan All set with my AM2.0 TK so first troop was to the Seattle Symphony Planets which they played some Star Wars. The Symphony Players did costumes even. TubaPlayer actually played as Kylo Ren. Impressive. Did a walk out during the concert and had a spotlight on us. Was pretty hard to see with a light in your face, but went really well. Then did pictures with folks as it was letting out. Really quick troop but was a good test run after I did some of the EIB modifications. We even got mentioned in the local Classical Radio station the next morning. I guess we made a impression on one of the announcers who was there that night. [emoji4]

FISD @ Celebration Chicago 2019 - Patch Contest ATTENTION TROOPERS!!! Feeling creative? Want to see your artwork and creativity immortalized and worn (and traded!) by hundreds at the biggest Star Wars event in the world? We are holding a contest to come up with an original FISD inspired patch design for Star Wars Celebration Chicago this April. The finished product will have it's own sales thread here and will be available for order as soon as possible! Contest Rules The competition is open today, January 5th, through midnight (PST) January 31st, at which time a poll will be opened so that everyone can vote on the design they like best. This contest is open to all members! (If you can see this post, you can enter.) There is no limit to the number of designs you can enter, and the shape can be round, chevron, etc. You are welcome (and encouraged) to reference our official logos and colors at the bottom of this post to incorporate into your design. Designs must have the full detachment name, 501st Legion name, date of the event (April 11-15, 2019), and LFL copyright if room is available. All entries become the property of the FISD / 501st Legion. FISD Image/Color Reference: The winner will be announced in the February Newsletter. In addition, the winner will receive TWO (2) free patches of their design and some other cool swag (TBD) but most importantly, serious bragging rights!

Name: Eric Ripley Height: 6'0” Weight: 160 lbs FISD Forum Name: Scimitar Legion ID#: 17529 Garrison: Georgia 501st Member Page: 501st Member Page - TK-17529 EIB Application: EIB Approval Thread - #875 Armor: AP Helmet: AP Blaster: HyperFirm E-11 Boots: Imperial Boots Canvas Belt: AP Hand Plates: Rubber (AP) Electronics: Ukswrath (Hovi-tip Speakers, Hearing Assist, & Fans) Neck Seal: Darman's Props Holster: AP Build Thread: Scimitar's ANH Stunt Build - AP -------------------------------------------------------------------- The visual improvement that was suggested in my EIB approval was to correct the ab return edge to match the kidney return edge. I made sure to do that but haven't had a chance to wear my kit since then, so here's pictures on my mannequin: Something I noticed after I posted my EIB application was that I had forgotten to bend my shoulder bridges down in the back to contour better with the back plate, so here's updated photos for reference: -------------------------------------------------------------------- Now, onto the checklist! Front: Back: Left: Right: Ab Detail - Buttons: Hand Plates (Flexible): Shoulder Bridge Back: Shoulder Bridge Front: Back/Chest Connection: Thigh Pack Attachment (from right & left): Knee Plate: Drop Box Back: Cod & Butt Plate Attachment: Cod Split Rivet Inside Snap: Interior Strapping: Arm Strapping: Kidney Plate Notches: Wrist Side of Forearms: Helmet Front: Helmet Right/Left: Back: Hovi Mic Tip Detail: Lens Color (Backlit): S-Trim: Blaster Right: Blaster Left: Blaster D-Ring: Neck Seal: Thermal Detonator - Back: Holster Attachment (Front): Holster Attachment (Back): Thank you in advance!! Please let me know if anything else is needed!

We exist solely to infuriate you. *bows* What can I say - I wasn't willing to sacrifice the entire mount by drawing in false sanding lines in more artistic places. Alternate (also true) excuse: I'm really really bad at applying makeup.

Don't trim anymore unless you have your boots. Need to test fit these with your boots!

Up early again this morning, doing some work on the shin guards and pre-assembled with some painter's tape. I'm going to use the belt sander for trimming up return edges on this go around. Now onto shoulder bells.....

Glad to hear I wasn’t the only one! More paint errands today resulted in proper black and white, and a French blue in Model Masters brand. When I have my kit I plan to paint a little test circle and compare against colors of those with the “real” color. And then I had a productive afternoon! I LOOOOOOVE the snap press. I knocked out this big pile (cutting, burning, snapping) in about 2 hours. I only messed up 1 snap, and it was the one my 4 yr old “helped” with. And in in the meantime my BBB still shows as “label printed” for 6 days

Ok thank you. Just wanted to make sure I wasnt missing any photos or anything. Thank you all for your time and all the info and updates for my armor. I have been hard at work. Sent from my SM-N950U using Tapatalk

I am absolutely blown away by this submission. Fabulous work on your armor, and beautiful pictures.

Great work Matt, has come out awesome, if you don't mind some feedback, one thing I would suggest you adjust is your chest box, it does appear a little high and close to the helmet, if you compare with the images below the centre of the chest box appears to align with the bottom of the shoulder bells giving more room between the helmet and the chest box. Once again great work, looking forward to seeing this as a CRL. Added

You: This is not the build thread your looking for New FISD members: Your right it’s not your ab buttons are upside down. Come on guys let’s check out that Bud Spakler guy he seems to know everything, but I hear he’s a low brow TK stunt that uses binders, a com mic, and chatter when he troops. Sent from my iPhone using Tapatalk

Sorry for the delay, being on nights causes me to sleep most of the day but.... Speak for yourself, Matt! Sent from my iPhone using Tapatalk

I also would like to get this into the Philippines.... Sent from my iPhone using Tapatalk

Pretty nice interview with FISD former DL, former LMO and current LMW, Eric Brager aka @Darth Aloha https://www.dailydot.com/parsec/stormtrooper-costume-uniform-design-politics/

Location: Seattle WA Event: Woodland Park Zoo Lights Date: 01-03-2019 Garrison: Titan Had really bad rain all day and everyone was worried that it'd be a washout. The rain letup just in time however! Of course, rain isn't much concern to a TK. Some of the other costumes might have had more problems. Guarding the Photo Memories. Might have some sensitive data in them. An Ewok showed up and really wanted to get it's pictures. Had to put it back into the Zoo. It's a petting Zoo. Boss showed up. Saber looks really good at night. Rode off in circles when it was all done. Some creaking, but nothing broke when I got mounted. Was a little worried I'd crack something, but it was all good!

Great pictures Craig! Psst!.........your handguards are on wrong hands

28: Mav's Game (12/08/18)