Welcome to the Captain Enoch resource thread for CRL creation

[azoroes[TK]]

I just looked it up again and it really seems like you are right. 

 

Even if it's not visible in any scene I can't deny that fact. I think I'll have to start up the printer again to switch sides, seems like I acidentally switched the two sides while post processing, but with so much more going on on this costume I just messed it up by not looking at that. 

 

Besides that...anything other you guys can spot? You can see I'm in a bit of a tunnel view at that point...

 

Hang tight, printer is already running again! 

Edited November 18, 2024 by azoroes

[Nairy[Staff]]

2 hours ago, azoroes said:

I just looked it up again and it really seems like you are right. 

 

Even if it's not visible in any scene I can't deny that fact. I think I'll have to start up the printer again to switch sides, seems like I acidentally switched the two sides while post processing, but with so much more going on on this costume I just messed it up by not looking at that. 

 

Besides that...anything other you guys can spot? You can see I'm in a bit of a tunnel view at that point...

 

Hang tight, printer is already running again! 

I think you look fantastic, the details so far are amazing! The only thing I thought of was the positioning of the leather fabric details, if you could try and get the angles we see?

 

Bad image from he here, but something I thought of: to move out the starting point of the diamond-stiched pieces to create a larger gap as we see in the image, the same with the two pieces under it (move them out a little from each other, and have more of an angle that makes them go more straight down), and possibly a sharper V in the center piece

 

It lookes like it can help with the look as well if you had larger biceps, both a bit wider but mostly longer, since the gap between the biceps and forearms is a bit more than what we see on screen! (alternatively larger shoulder bells, in that case you should just be able to move the biceps down a bit)

 

 

That's the only thing I saw (although I of course agree with the R1 shins overlapping the other way around, I didn't think of it at first), and you should really be proud of what you have done so far!  

[gmrhodes13[Staff]]

A couple of screen references, it's barely open when he's standing still

 

 

[DANE]

The CRL says “ there is  single belt loop to the left of the rectangular section, level with the strap.”

I don’t see a belt loop….Unless it’s those 2 vertical looking lines? 

Edited November 29, 2024 by DANE

[themaninthesuitcase[Admin]]

17 hours ago, DANE said:

The CRL says “ there is  single belt loop to the left of the rectangular section, level with the strap.”

I don’t see a belt loop….Unless it’s those 2 vertical looking lines? 

I've been looking back at the reference, and I am not sure what that is referring to. Best I can see is maybe in some images you can see the holster and that's what I was seeing?

 

I'll remove it.

[Tanz]

Hi, am totally jumping in on a Enoch build and reading over this thread has been informative.

I plan printing up McFlyPrint's armor and after mentioning to him that his thigh armor needed  a tweet due to an edge he created, he happily made the adjustments and will be updating his main file if anyone has had an interest in getting his files.

Cool thing is that he's open to make any other modifications that will meet the eventual CRL requirements.

 

 

✌️

[Sly11[Admin]]

Nice!

You won't need to print the cod and butt plate, so save yourself some time and filament

[Tanz]

On 1/26/2025 at 3:37 AM, Sly11 said:

Nice!

You won't need to print the cod and butt plate, so save yourself some time and filament

I was wondering about that...Thanks 🫡

[gmrhodes13[Staff]]

17 minutes ago, Tanz said:

I was wondering about that...Thanks 🫡

Haven't you finished yet 

[azoroes[TK]]

Hey folks, 

 

I know it has been pretty silent, but I had to do some modifications (then pictures fully suited and more little mods)

 

But I finally got to a point where I am pretty pleased and have taken all your inspirations and thoughts into it, so here we go, hope all of you like it:

 

 

First one is cutout, quality for the CRL will be better, but I only gonna start with it as soon as I got the go to move on!

 

 

Edited February 16, 2025 by azoroes
Added the Cutout version of the pic

[Yiyo[501st]]

Hi team,

 

Do we really know what still missing to get this CRL out the door? I understand and backup the fact that we want things to be almost perfect, but we really could do with getting it published as people lose interest in the costume :(

Edited February 22, 2025 by Yiyo

[gmrhodes13[Staff]]

22 minutes ago, Yiyo said:

Hi team,

 

Do we really know what still missing to get this CRL out the door? I understand and backup the fact that we want things to be almost perfect, but we really could do with getting it published as people lose interest in the costume :(

Complete photos of all the costume and individual pieces as seen in all legion CRL''s as well as LMO oversight.

 

More info on CRL creation here https://databank.501st.com/databank/Costuming:CRLGuide

[Yiyo[501st]]

2 hours ago, gmrhodes13 said:

Complete photos of all the costume and individual pieces as seen in all legion CRL''s as well as LMO oversight.

 

More info on CRL creation here https://databank.501st.com/databank/Costuming:CRLGuide

 

@azoroes Alex, you "only" need submitting all photos and so on, I have modelled 2 CRLS, if you need any support, let me know! Detachment staff are ready mate!

[themaninthesuitcase[Admin]]

Hi @azoroes some how missed your post.  I've requested the staff/DO to do a quick agreement test and pending that we can progress with a full set of images whilst we wait for the LMO to come back online after the elections.

[azoroes[TK]]

Alright, did all the pictures so far, here are the pictures in cutout version, hope the team can figure everything out (matching everything together so it fits the requirements of the crl as it's mostly seperate pictures)

 

Full shot:

Picture by TK-14469

 

Helmet:

 

Neckseal:

I reccomend  using the ones from the R1TK, haven't managed to get a nicer shot

 

Undersuit:

 

(yep, thats an ugly one but it fits the purpose)

 

Shoulder straps:

 

Shoulder Armor

 

Upper Arm Armor

 

Forearm Armor

 

Hand Plates

 

 

Gloves

 

 

 

Chest Armor /  Back Armor

 

Abdomen Armor

 

Over Skirt

 

Belt  / Holster

 

Thigh Armor

 

Lower Leg Armor

 

Boots

 

Captain Enoch SE-14 Blaster

 

Edited October 5, 2025 by azoroes
Added Pictures of Gloves, Handplates, Undersuit and Shoulder Straps

[gmrhodes13[Staff]]

This is an interesting detail, comparing with the Hot Toys, both appear to only have the one slot, not a plate or raised area.

 

In this image there does appear to be something on the other side (in green) but it is not the same angle as it is on the right, could be a gouge/groove.

 

 

Hot Toys are usually pretty spot on with their details, nothing on the left side though.

 

 

Looking for more rear images if anyone has any

[Yiyo[501st]]

Great catch!

 

Is this enough to stop basic approval though? Depending on the wearer, I think this will be covered by the Kama or the back panel.

 

It’s obviously not my decision but I honestly hope this won’t be a showstopper at this point as we will never reach perfection. 

[themaninthesuitcase[Admin]]

15 hours ago, gmrhodes13 said:

In this image there does appear to be something on the other side (in green) but it is not the same angle as it is on the right, could be a gouge/groove.

That looks like a filler panel behind where the back plate would normally fit.

[azoroes[TK]]

Looking threw my research resources I can neither deny or confirm what the panel actually is. 

 

From a logical perspective I would think they used an R1 TK and just dismissed the tonister, but we won't know for sure until we can get more pictures of that costume. 

 

So saying I would go with Yiyo's opinion as we all did the best to get a really good CRL so far and if we get more of Enoch (in which form is unsure so far) updating the CRL should be the way. Also speaking out of experience this part is nearly never visible as the belt mostly covers it while wearing.

 

But for now on I think we are as good as anyhow possible.

Edited February 26, 2025 by azoroes

[gmrhodes13[Staff]]

ROTK abdomens are a little different at the back, as you can see from this image, they have an elastic section with a zip, which is covered with there detonator plate

 

Well most of it is covered 

 

As we have seen with the chest, abdomen and shoulders Enoch has specific pieces just made for it.

 

[azoroes[TK]]

I remember, kind of like the tank trooper, dealed with a r1tk a long time ago, but wasn't 100% sure 

 

But still, we're talking about a piece that's nearly invisible and too bad to see to be sure what's right, so at the moment I would suggest moving on 

I'll upload the last picture today evening, then we should have everything together we can get to have a final CRL 

[themaninthesuitcase[Admin]]

Based on this:

 

I've added to level 3 that the shoulder bell > shoulder strap strap should be dark burgundy similar to the under suit.

Good spot by @gmrhodes13

[azoroes[TK]]

Alright, just updated the remaining single pictures.

 

Sadly it will take a bit longer for the full body shots as I need at least one person that can suit me up correctly and also a good photographer to capture everything in perfection.

 

Hope I can manage to get it done before celebration but it's a tight timeframe at the moment.

 

Never the less I already painted the straps with fabric color to the best possible result:

 

[azoroes[TK]]

So I spontaniously got to a con and did some new pics with all your suggestions in mind!

 

As far as I can tell there's nothing left to do! (Yes, I already said this one or two times before )

 

 

I don't really know why it looks blurry in some places, I can also get the high resolution pictures to everyone via mail.

 

To everyone attending celebration: hope to see all of you soon!

Edited March 30, 2025 by azoroes

[themaninthesuitcase[Admin]]

Thanks. I'll try find some time to go through them all and match them up to the CRL needs.

Just for awareness there are some issues with the CRL system, which is being resolved, but not sure on lead times for some of this with the LMO.