gmrhodes13[Staff] Posted February 3, 2020 Report Share Posted February 3, 2020 Nice work, coming along great Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 4, 2020 Author Report Share Posted February 4, 2020 Small Update: Ordered 2 tubes of E6000, they should be arriving on Thursday! Also Ordering my dads kit tomorrow night, along with all the other pieces we need, very exciting! In the meantime, I cut my frown pieces out for my helmet: 4 Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 6, 2020 Author Report Share Posted February 6, 2020 hello all. We've been waiting for the e6000 as we have run out of glue! One question though, which of the 4 bumps on the ear of the helmet do you paint black? and is it on both sides? Thanks! Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 6, 2020 Report Share Posted February 6, 2020 (edited) 59 minutes ago, chiefbonan said: which of the 4 bumps on the ear of the helmet do you paint black? and is it on both sides? Thanks! Hi, As per the CRL Ear bars shall have only one bump painted in black (rank stripes). It doesn't indicate which one is painted, The common painted is the last one from the front. Cheers Edited February 6, 2020 by TKSpartan Add text 1 Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 8, 2020 Author Report Share Posted February 8, 2020 Hello, just doing some torso fitting. It is all going great, but we are finding that some of the snaps are weak and come apart with little effort. Is there any way to fix this? Quote Link to comment Share on other sites More sharing options...
husky68[TK] Posted February 8, 2020 Report Share Posted February 8, 2020 Snap quality can vary, I have great ones and good ones. In a pinch you can add some glue but that is a temporary quick fix.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 8, 2020 Report Share Posted February 8, 2020 8 hours ago, chiefbonan said: some of the snaps are weak and come apart with little effort. Is there any way to fix this? Hi, can you post some photos of where exactly are you having problems? Cheers Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted February 9, 2020 Report Share Posted February 9, 2020 14 hours ago, chiefbonan said: Hello, just doing some torso fitting. It is all going great, but we are finding that some of the snaps are weak and come apart with little effort. Is there any way to fix this? Hi Thomas If you want good quality snaps that wont fail easily, you can get them from most leather supply stores. Not sure if you have Mac-lace in Vic but you could try Leffler leather in Melbourne. Generally they are of a better quality and a little more heavy duty so wont fail easily. The snaps from Spotlight and general haberdashery stores are not always the best. https://www.leffler.com.au/ Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 9, 2020 Report Share Posted February 9, 2020 14 hours ago, chiefbonan said: Hello, just doing some torso fitting. It is all going great, but we are finding that some of the snaps are weak and come apart with little effort. Is there any way to fix this? As some have already said it can be the type/quality of snap, also the post may not be being bent enough, you could try the following Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 11, 2020 Author Report Share Posted February 11, 2020 Hello all, have been super busy, I haven't died! Update post coming soon. Is it possible to trim the bottom of the shoulder bells off so you can see more of the bicep? Thanks! 1 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 11, 2020 Report Share Posted February 11, 2020 1 hour ago, chiefbonan said: Hello all, have been super busy, I haven't died! Update post coming soon. Is it possible to trim the bottom of the shoulder bells off so you can see more of the bicep? Thanks! Hi, great new that you haven't died. . I think yes, it's possible to trim the shoulder bells, but try to be sure that it's really needed to do. Put on all your armor a take fotos and check. You compare with reference photos of original movies scenes and pics. Also you can post them here. Cheers Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 11, 2020 Author Report Share Posted February 11, 2020 Hey everyone! Me and Dad have been hard at work! We have made alot of progress. Got some tubes of the legendary E-6000: Got some rubber gloves: So we found the butt plate stuck out over the kidney plate, so we put some tabs on the inside: And we started to build the arms, here is the right one: And finally we finished the shoulder strapping: So that is wat we've been up to. Dad is getting more and more excited to get his armour soon. We still haven't moved onto the legs, but we will once the arms are done! 1 Quote Link to comment Share on other sites More sharing options...
TheSwede[TK] Posted February 11, 2020 Report Share Posted February 11, 2020 Nice work Just a little heads up that if the tabs are seen between the parts they need to be black. Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 11, 2020 Author Report Share Posted February 11, 2020 13 minutes ago, TheSwede said: Nice work Just a little heads up that if the tabs are seen between the parts they need to be black. Oh yeah they are black on the other side, should've shown that, thanks for the heads up though 2 Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 11, 2020 Report Share Posted February 11, 2020 Great advance Thomas, keep it up Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 17, 2020 Author Report Share Posted February 17, 2020 Got me a pair of boots today!, what is the best way to paint them? Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 17, 2020 Report Share Posted February 17, 2020 That will depend on if they are leather or a man-made material. Thomas. If they are leather, you will need to remove the finish with acetone (the stronger stuff, not like that found in nail polish remover) and lightly sanded so that the paint/dye will adhere. There are several companies that make these products, so it may take a bit of searching. If they are plastic, the finish will still have to be removed, but NOT with acetone, as it could melt them. This link may help. Whichever type you have, it is VERY important to let the dye dry completely between coats. 1 Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 21, 2020 Author Report Share Posted February 21, 2020 Hello all. is this gap alright for the back of the calves? is the overlap too much? 2 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 21, 2020 Report Share Posted February 21, 2020 Looks great, Thomas! Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 21, 2020 Report Share Posted February 21, 2020 On 2/17/2020 at 3:41 PM, chiefbonan said: Got me a pair of boots today!, what is the best way to paint them? Hopefully the neck is high enough, sometimes the lower neck boots will pull out from under the shins, either adding velco or elastic and snaps to hold them in place could help. Also notice the elastic on the sides is a lot lower on your pair, although a GML possibly wouldn't notice that, could be picked up at higher levels though. 1 Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 22, 2020 Author Report Share Posted February 22, 2020 20 hours ago, gmrhodes13 said: Hopefully the neck is high enough, sometimes the lower neck boots will pull out from under the shins, either adding velco or elastic and snaps to hold them in place could help. Also notice the elastic on the sides is a lot lower on your pair, although a GML possibly wouldn't notice that, could be picked up at higher levels though. Damn that doesn't sound good with the elastic, hopefully it shouldn't be an issue Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 23, 2020 Author Report Share Posted February 23, 2020 (edited) Hello all. My dad some testing for the hand guards. The laytex ones you can get online are a bit 'not cheap', so my dad was looking for alternatives. The CRL states that the Cert 3 hand guards need to be 'laytex or laytex like'. My dad stated that EVA Foam is a type of laytex, so should be approveable, but I do not think I agree. Here are pictures of a VERY ROUGH draft EVA Foam handplate, next to the Solid ABS ones for reference. Do you think this is acceptable? ALSO PSA, my dad wanted all of you to know his armour has been sent by the armour dealer! Only a matter of 1-2 weeks before it gets here and we start this process all over again! But now we have more knowledge AND my dad isn't as skinny, sizeing should be a lot easier and faster! Edited February 23, 2020 by chiefbonan Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 23, 2020 Report Share Posted February 23, 2020 Nice work on the shape but they are a little rough looking on the top, not sure it that's paint though? For basic approval your GML (garrison membership liaison) would be deciding so I would check with him/her. For L3 it is required that you bend them to show they are latex (or latex like) so yo may want to try that, ultimately you would need one of our Deployment Officers to chime in, I'll tag them now @justjoseph63 @shashachu Quote Link to comment Share on other sites More sharing options...
chiefbonan Posted February 23, 2020 Author Report Share Posted February 23, 2020 28 minutes ago, gmrhodes13 said: Nice work on the shape but they are a little rough looking on the top, not sure it that's paint though? For basic approval your GML (garrison membership liaison) would be deciding so I would check with him/her. For L3 it is required that you bend them to show they are latex (or latex like) so yo may want to try that, ultimately you would need one of our Deployment Officers to chime in, I'll tag them now @justjoseph63 @shashachu Hello, Yes it is dark EVA Foam coated with white paint, it would probably not bend too much unless it was thinner. Again it was a really rough version since we are going to be ordering parts off of Trooperbay soon, so we were deciding if we needed to include the hand guards or not Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 23, 2020 Report Share Posted February 23, 2020 Those actually turned out pretty well, but you may want to re-think the shape/design a bit to be more screen accurate. They definitely should be thinner, though, to conform with the shape of the top of your hand. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.