NoZoupForYou[TK] Posted August 28, 2018 Author Report Share Posted August 28, 2018 Oh I wouldn't recommend it. The stick I used I cut into an angle and it was some work on some parts.Sent from my VK815 using TapatalkAh... I see. Won’t scratch the ABS then I supposeSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 28, 2018 Report Share Posted August 28, 2018 Yes and you can get all the way down into the corner.Sent from my VK815 using Tapatalk Quote Link to comment Share on other sites More sharing options...
CableGuy[Admin] Posted August 28, 2018 Report Share Posted August 28, 2018 Also, be careful of breathing in too much E6000. Well ventilated room etc. Just in case. :-) 1 Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 28, 2018 Report Share Posted August 28, 2018 Also, be careful of breathing in too much E6000. Well ventilated room etc. Just in case. :-)Listen to Dan you must, open a window you should.Sent from my VK815 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 29, 2018 Author Report Share Posted August 29, 2018 Listen to Dan you must, open a window you should.Sent from my VK815 using TapatalkI’ve been working in the garage with a medium respirator. Not risking it.I just bought some 1” nylon webbing to install Tandy line 24s on the armor. For the elastic should I ditch whatever anovos supplies and buy off amazon?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 29, 2018 Report Share Posted August 29, 2018 Depends I used some of it. Mostly it is just okay.Sent from my VK815 using Tapatalk Quote Link to comment Share on other sites More sharing options...
StrmTRPR85[TK] Posted August 29, 2018 Report Share Posted August 29, 2018 14 hours ago, CableGuy said: Also, be careful of breathing in too much E6000. Well ventilated room etc. Just in case. :-) I love the smell of E6000 in the morning Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 29, 2018 Report Share Posted August 29, 2018 9 minutes ago, StrmTRPR85 said: I love the smell of E6000 in the morning Hahahahaha! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 29, 2018 Report Share Posted August 29, 2018 22 minutes ago, StrmTRPR85 said: I love the smell of E6000 in the morning RIGHT!? It's a darn shame t's harmful lol Quote Link to comment Share on other sites More sharing options...
wook1138[TK] Posted August 29, 2018 Report Share Posted August 29, 2018 You are making great progress. Nice work! Be sure to check out the snap setting tutorial in the "how to" section. And get a snap setter that has the sliding sleeve part that helps keep the snap in place. It'll save you some grief. 1 Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 29, 2018 Author Report Share Posted August 29, 2018 Wow... closing these things was harder than I thought it would be!Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
TheSwede[TK] Posted August 30, 2018 Report Share Posted August 30, 2018 Looking good Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 30, 2018 Author Report Share Posted August 30, 2018 I’m starting to plan the front armor connections. For the kidney to abdomen, I know there will be a gap and I’ll need a little extra room. I’ve watched videos were people just use nylon. Should I use elastic toprovide a little give? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted August 30, 2018 Report Share Posted August 30, 2018 I prefer elastic, good for bending, especially useful when giving younglings high fives. I also incorperated adjusters on them, handy for when the elastic stretches over time. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 30, 2018 Report Share Posted August 30, 2018 21 minutes ago, NoZoupForYou said: I’m starting to plan the front armor connections. For the kidney to abdomen, I know there will be a gap and I’ll need a little extra room. I’ve watched videos were people just use nylon. Should I use elastic to provide a little give? Sent from my iPhone using Tapatalk Great question, canon armor was assembled mostly with elastic for obvious reasons, mobility. For nice tight fitting armor either use nylon or tight elastic. Something to keep in mind any excessive gaps in these areas may be mentioned at the higher levels of approval., so nice and snug is recommended. That said, this is your armor and as Glen mentioned flexibility is key when trooping. I personally use both, most torso connections I use nylon (except for the shoulders), and lower arms are elastic. This allows for a nice tight fitting armor where it needs to be and flexible in those areas. 2 Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 30, 2018 Author Report Share Posted August 30, 2018 Great question, canon armor was assembled mostly with elastic for obvious reasons, mobility. For nice tight fitting armor either use nylon or tight elastic. Something to keep in mind any excessive gaps in these areas may be mentioned at the higher levels of approval., so nice and snug is recommended. That said, this is your armor and as Glen mentioned flexibility is key when trooping. I personally use both, most torso connections I use nylon (except for the shoulders), and lower arms are elastic. This allows for a nice tight fitting armor where it needs to be and flexible in those areas. Thanks!I plan on building to achieve basic, but am making sure to add the items necessary for higher levels. The plan is to get this thing done by Halloween for the neighborhood kids at a level that should gain basic.I understand there must be minimal to no gaps between the abdomen and kidney, so after basic, I’ll start adding shims and fine tuning things necessary for the higher levels. It looks like chest to abdomen might be ok with straight nylon.Abdomen to kidney will definitely be elastic.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 30, 2018 Report Share Posted August 30, 2018 5 hours ago, NoZoupForYou said: I plan on building to achieve basic, but am making sure to add the items necessary for higher levels. The plan is to get this thing done by Halloween for the neighborhood kids at a level that should gain basic. I understand there must be minimal to no gaps between the abdomen and kidney, so after basic, I’ll start adding shims and fine tuning things necessary for the higher levels. It looks like chest to abdomen might be ok with straight nylon. Abdomen to kidney will definitely be elastic. I'll probably get slapped for saying this but build it to Centurion standards and if you're not finished by Halloween just use white gaffers to tape to hold together whatever's not completed. I mean you're in your neighborhood, no one will know or care how imperfect you may look . You're a Stormtrooper that's awesome enough lol . After Halloween's over continue building it the correct way. Just a thought 3 Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 30, 2018 Author Report Share Posted August 30, 2018 I'll probably get slapped for saying this but build it to Centurion standards and if you're not finished by Halloween just use white gaffers to tape to hold together whatever's not completed. I mean you're in your neighborhood, no one will know or care how imperfect you may look . You're a Stormtrooper that's awesome enough lol . After Halloween's over continue building it the correct way. Just a thought Haha! I might do that.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
NoZoupForYou[TK] Posted August 31, 2018 Author Report Share Posted August 31, 2018 I have a problem right now, and it is somewhat of a decision point for it....To me, when I think of Stormtroopers I always think of Sandtroopers. That’s how I first remember them from a New Hope. Move along, and Look Sir, Droids just stands out.Part of me really wants to go that route, but I can’t decide. I know I’ll need to get the knee plate, I know to omit things like the chest plate buttons. It looks like on the helmet I just hand paint grey into the tears and trapezoids. I know I leave off the shoulder connectors and remove the mesh from the helmet frown. Conversion on an Anovos kit seems easy enough.The weathering looks easy as well. I just can’t decide if this is the route to go.I need an Obi Wan to provide me with some spiritual guidance. Are there any pros and cons?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 31, 2018 Report Share Posted August 31, 2018 So going Sandy does leave bits off of the kit, but it also means getting a back pack, pouches, pouldron and depending on how far you want to go you may also need a DLT-19.Sent from my VK815 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 31, 2018 Report Share Posted August 31, 2018 Sandy is much more involved and costly but least you get to get dirty, bang into junk and not care, become one of a few and if you go SWAT you'll join the elite class of less than 60 members in the entire world. 1 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted August 31, 2018 Report Share Posted August 31, 2018 35 minutes ago, Rat said: So going Sandy does leave bits off of the kit, but it also means getting a back pack, pouches, pouldron and depending on how far you want to go you may also need a DLT-19 Actually with the allowable Sandrooper combinations you don’t necessarily need a backpack or DLT-19 for approval or in fact even for some of the higher levels. A pouldron and pouch/es yes. 2 Quote Link to comment Share on other sites More sharing options...
Rat[TK] Posted August 31, 2018 Report Share Posted August 31, 2018 Actually with the allowable Sandrooper combinations you don’t necessarily need a backpack or DLT-19 for approval or in fact even for some of the higher levels. A pouldron and pouch/es yes. Thanks for the clarification Glen.Sent from my VK815 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
TheSwede[TK] Posted August 31, 2018 Report Share Posted August 31, 2018 (edited) 2 hours ago, gmrhodes13 said: Actually with the allowable Sandrooper combinations you don’t necessarily need a backpack or DLT-19 for approval or in fact even for some of the higher levels. A pouldron and pouch/es yes. For basic no pack is needed but for L2 Police officer you MUST have a pack even if your SWAT-Trooper L3 does not Edited August 31, 2018 by TheSwede Speeeeeeellllling 1 Quote Link to comment Share on other sites More sharing options...
TheSwede[TK] Posted August 31, 2018 Report Share Posted August 31, 2018 3 hours ago, NoZoupForYou said: I need an Obi Wan to provide me with some spiritual guidance. Are there any pros and cons? Go with what you like the most, like Tony said the TD (Sandtrooper) has more extras like a Field Pack, it´s optional for basic but for L2 is a requriment and in my opinion the Field Pack is what makes it a Sandtrooper If you are having a hard time deciding then go Stormtrooper first and Sandtrooper next 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.