Shanester[TK] Posted April 12, 2017 Report Share Posted April 12, 2017 (edited) Basic Information Name: Shane Aubrey Legion ID: 71969 Garrison: Bast Alpha Garrison Mandatory Information Armor Maker: Anovos Helmet Maker: Anovos Blaster Type: Hyperfirm Optional Information Height: 5'7" Weight: 170lbs. Boots Maker: TK Boots Canvas Belt: ABS80 Hand Plates: Silicone (JustJoseph63) Electronics: AKER/ICOMM Neal Seal Type: Anovos - Zip Holster Maker: Anovos EIB Application Upgrades after EIB and suggested fixes: 1. Move shoulder bells inward a bit. Bells have been adjusted inward by 15MM. 2. Clean up frown paint. Done with mineral spirits and cotton swabs. 3. Change out Mictips. Replaced Mic tips with more accurate versions. 4. Reduce space between ab and kidney while wearing armor. Made adjustments. 5. Replace hard hand guards with flexible rubber version. Replaced with silicone HGs. 6. Reduce return edge and adjust placement of ab button plates. Adjustments made. 7. Change out screws at base/opening of helmet below "ears". Thank you for your time and consideration. Edited April 12, 2017 by Shanester 1 Quote Link to comment Share on other sites More sharing options...
pattrooper Posted April 12, 2017 Report Share Posted April 12, 2017 great work 1 Quote Link to comment Share on other sites More sharing options...
sharkbait[TK] Posted April 12, 2017 Report Share Posted April 12, 2017 Your hand-painting on your bucket is fantastic. 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted April 28, 2017 Report Share Posted April 28, 2017 Hey Shane thanks for your patience. Before we get started we need you to do something for us. The CRL states for Centurion there is to be no return edge on the forearms, wrist side. You'll need to remove this and post a new photo before we can proceed. Thank you Reference photo Quote Link to comment Share on other sites More sharing options...
troopermaster Posted April 28, 2017 Report Share Posted April 28, 2017 Right shoulder bridge is backwards Quote Link to comment Share on other sites More sharing options...
ABS80 Posted April 28, 2017 Report Share Posted April 28, 2017 (edited) the added grey painted frown tips is incorrect, should be a empty space which is a uncut tooth then add the grey tip. You can see what I mean here: http://www.whitearmor.net/forum/topic/35434-ap-new-kit-photos/ Edited April 28, 2017 by ABS80 Quote Link to comment Share on other sites More sharing options...
Shanester[TK] Posted May 1, 2017 Author Report Share Posted May 1, 2017 I had a busy weekend trooping. I will start on the adjustments tonight. I don't know how I managed to reverse that shoulder strap. Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted May 1, 2017 Report Share Posted May 1, 2017 I had a busy weekend trooping. I will start on the adjustments tonight. I don't know how I managed to reverse that shoulder strap. Great to finally see your Centurion submission, Shane! Hopefully you used E-6000 to attach that shoulder strap, which will make it much easier to fix, and fantastic job on that ABS belt placement! I'm not sure what sort of strapping system you are using on the thighs, but the left one seems to ride a bit low. The right shin/thigh alignment is absolutely perfect, but the left shin looks as if it wants to turn toward the middle. This is easily remedied by attaching a piece of 1x1x 12 inch foam to the inside of the front. (I had the same issue). All easy fixes, my friend, and I look forward to seeing you at Centurion level soon! Side note: Still waiting on that Attache bio, and nice hand guards! Quote Link to comment Share on other sites More sharing options...
Shanester[TK] Posted May 2, 2017 Author Report Share Posted May 2, 2017 Thanks Joseph! I assure you it is high on my list. I trimmed down the forearms and took pictures, I did a little work on the teeth as suggested. Pic attached for review. I took the backwards shoulder strap of (good ole E6000) and reglued it. Pic will be provided in 24 to 48 hours. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted May 2, 2017 Report Share Posted May 2, 2017 Looking good Shane Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted May 2, 2017 Report Share Posted May 2, 2017 Hey Shane welcome back and thank you for your Centurion application. CRL and Centurion Application Requirements: All required photos have been submitted.Thank your for making the suggested and required, very nice work Your armor now contains all necessary elements to qualify you for Centurion. Andrew and I would like to congratulate and welcome you . Excellent job on your build Other-Armor Fit/Assembly: Andrew and I recognize you put a lot of hard work into your build and we want you to know we notice it. As you know Centurion is the ultimate level. If we had any suggestions to improve the overall look of your armor this is where we would mentioned it. That being said we have a couple areas to mention first being the shoulders bells. It looks like you've removed a great deal of lower return edge yet your bells and maybe even tightened the upper strap buy they're still not collapsing around the biceps as they should. Not sure why this is. It's possible the bells might be too small for you. It might be a good idea to replace them with larger one if possible when you have time Secondly the ab to kidney alignment is still misaligned quite a bit. In this situation it might be best to use nylon webbing to connect the two sections if you're not done so already. That's it brother. Congratulations again, now head on out and make the Empire proud 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted May 2, 2017 Report Share Posted May 2, 2017 For the record we were going to talk about the shoulder bridge but since you're already working on it we removed the notation. When you're finished please post a new photo for others to see . Congrats again Shane Quote Link to comment Share on other sites More sharing options...
Shanester[TK] Posted May 2, 2017 Author Report Share Posted May 2, 2017 Until the glue cures and I remove the excess glue, here is a WIP. 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted May 2, 2017 Report Share Posted May 2, 2017 Excellent!, thanks Shane 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted May 2, 2017 Report Share Posted May 2, 2017 WAY TO GO, Shane! Congrats, brother, and welcome to level 3!! 1 Quote Link to comment Share on other sites More sharing options...
Captain_Wordo[TK] Posted May 3, 2017 Report Share Posted May 3, 2017 Congrats Shane and welcome to the centurion rank! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.