KY-Raptor[TK] Posted July 1, 2015 Report Share Posted July 1, 2015 Forgive me if this has been covered before, but does anyone have any experience with this vendor? Something popped up on my newsfeed yesterday and I went to check it out. Good looking items very reasonably priced. I was thinking about picking up a DLT heavy blaster for my TK. Thanks in advance for any insight you can offer. Darren Quote Link to comment Share on other sites More sharing options...
AnjelRedemption[TK] Posted July 1, 2015 Report Share Posted July 1, 2015 Looks interesting. I'm worried about teh 50% deposit. Also, I would like to see the finished product from someone who has bought one. 195 for a DTL is not bad. Very interesting indeed.... 1 Quote Link to comment Share on other sites More sharing options...
Fiddlers Green[501st] Posted July 1, 2015 Report Share Posted July 1, 2015 I pulled the trigger and ordered one lol. I've bought worse for $200, what could possibly go wrong? 1 Quote Link to comment Share on other sites More sharing options...
DroidHunter Posted July 1, 2015 Report Share Posted July 1, 2015 I can tell you that Chad and Joe are two great guys in our Garrison. This is a relatively new venture for them, but they seem to be doing some really nice work. I'll post up if I get the opportunity to take some first hand pictures. I was just chatting with them yesterday about a future project. Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted July 1, 2015 Report Share Posted July 1, 2015 Must be new on the market because I had never heard of them before. The pictures they post show the mould masters are scratch built from pvc pipes and other bits, but look decent. Will probably not hold up against castings from actual MG's, when comparing details. As usual, buyer beware. 1 Quote Link to comment Share on other sites More sharing options...
DroidHunter Posted July 2, 2015 Report Share Posted July 2, 2015 Must be new on the market because I had never heard of them before. The pictures they post show the mould masters are scratch built from pvc pipes and other bits, but look decent. Will probably not hold up against castings from actual MG's, when comparing details. As usual, buyer beware. They are new to doing this, having set up shop just a few months ago. I'll see if I can get them to post up here soon. Quote Link to comment Share on other sites More sharing options...
Fiddlers Green[501st] Posted July 2, 2015 Report Share Posted July 2, 2015 I just asked emailed Chad (@ Diamond State Props) and asked him if they were making a T21 also. His reply: "Hi Don! Thank you! We really appreciate the support of our small business. Thank you for your compliments! A lot of work went into this rifle. Now I can't wait to get it out to you. We have had interest in the T-21, but it's not on the docket quite yet. If someone does want to commission us to do it in the near future, I'll let you know. I'll keep you updated on your build." Quote Link to comment Share on other sites More sharing options...
KellwolfB6[501st] Posted July 8, 2015 Report Share Posted July 8, 2015 Some of the guys over on the IOC forums have bought stuff from them and seem pretty happy. I know they're doing a DH-17 prototype as well for one of the guys there. Quote Link to comment Share on other sites More sharing options...
UHCoog12[TK] Posted July 24, 2015 Report Share Posted July 24, 2015 (edited) Someone posted pictures of theirs that they purchased from Diamond State Props. I'm reposting here for reference as to what the final product will look like. The makers recommend that the blaster be painted with a metallic/silver coat before putting on the Black Matte and Sealing coat. According to the prop makers, the blaster can be broken down into smaller pieces for better transportation. However they warn against doing it often as the screws may eventually strip the PVC/Resin. I'm interested in purchasing as well and these pictures really help my decision process. Hope this helps! Edited July 24, 2015 by UHCoog12 1 Quote Link to comment Share on other sites More sharing options...
DSProps Posted October 22, 2015 Report Share Posted October 22, 2015 Hi guys! Chad here from Diamond State. (TB-61610) If you have any questions just hit me up anytime! Chad info@diamondstateprops.comhttp://diamondstateprops.com/ 1 Quote Link to comment Share on other sites More sharing options...
Tacblue[TK] Posted October 22, 2015 Report Share Posted October 22, 2015 I'm the guy from the IOC forum they did the DH-17 proto for. Couldn't be happier. Top notch blaster and great folks to deal with! Quote Link to comment Share on other sites More sharing options...
dapradiel[TK] Posted October 30, 2015 Report Share Posted October 30, 2015 What material are these DLT-19s made from? Can they handle being dropped? Quote Link to comment Share on other sites More sharing options...
Tacblue[TK] Posted October 31, 2015 Report Share Posted October 31, 2015 My DH-17 is primarily pvc, with what seems like a resin cast singlepoint scope. I had them put a metal tube inside the main body to add some heft. Seems VERY sturdy to me. I imagine the DLT-19 is more or less the same materials. By their own admittance, they specialize in pvc work. Pretty sure impact would not be an issue. Quote Link to comment Share on other sites More sharing options...
dapradiel[TK] Posted October 31, 2015 Report Share Posted October 31, 2015 How does it compare to Hyperfirm? Quote Link to comment Share on other sites More sharing options...
Darth Havoc[TK] Posted November 1, 2015 Report Share Posted November 1, 2015 (edited) I'll echo droid hunter on these guys. They are good people and are making some good blasters I saw the do-19 first hand and it is amazing They also did a ion blaster and a Kalus blaster They just finished a ESB E-11 for me I'll pick it up and post pics here As are as hyper firm, I believe they are rubber and un-breakable Edited November 4, 2015 by Darth Havoc Quote Link to comment Share on other sites More sharing options...
Tacblue[TK] Posted November 3, 2015 Report Share Posted November 3, 2015 I have a Hyperfirm RotJ E-11 also, and I think overall the DS DH-17 is sturdier. My Hyperfirm started falling apart awhile back and I've had to epoxy it back together multiple times. Quote Link to comment Share on other sites More sharing options...
TC5800[TK] Posted November 4, 2015 Report Share Posted November 4, 2015 I ordered a DC15s and an F-11D. I couldn't be more impressed with the sculpt and casting. Very little clean up and super crisp. Only complaint I could see is the trigger for the F11 is easily snapped off. I just cut mine out anyway. Quote Link to comment Share on other sites More sharing options...
Griffin-X[TK] Posted November 4, 2015 Report Share Posted November 4, 2015 (edited) Chad is a great guy and they provide good customer service. I am going on 14+ weeks awaiting a DH-17 blaster. Edited November 4, 2015 by Griffin-X Quote Link to comment Share on other sites More sharing options...
DSProps Posted November 4, 2015 Report Share Posted November 4, 2015 Hi Jim, I'm sorry! It's almost done.. we're working really hard and as fast we can I promise! I'm also painting it for you for no charge. We are starting to catch up so shorter wait times are coming. Thanks everyone for your support. 1 Quote Link to comment Share on other sites More sharing options...
Tacblue[TK] Posted November 4, 2015 Report Share Posted November 4, 2015 Hahaha, it's tough being successful! Good to hear! Quote Link to comment Share on other sites More sharing options...
Griffin-X[TK] Posted November 5, 2015 Report Share Posted November 5, 2015 Hi Jim, I'm sorry! It's almost done.. we're working really hard and as fast we can I promise! I'm also painting it for you for no charge. We are starting to catch up so shorter wait times are coming. Thanks everyone for your support. Thanks Chad. I look forward to owning this one. Quote Link to comment Share on other sites More sharing options...
DSProps Posted December 3, 2015 Report Share Posted December 3, 2015 Hi everyone, due to overwhelming demand, the upcoming Star Wars movie, and the holidays, we are temporarily postponing any more new individual orders until further notice. We need to concentrate on our current loyal customers and fulfill their orders first. Starting the first week of March 2016, we will be converting from individual sales to doing runs. Our first run will be (20) DLT-19s and they will ship out the week of March 13. Orders for this run will be open later this week or early next week via our website:http://diamondstateprops.com/ Quote Link to comment Share on other sites More sharing options...
StormBuster Posted January 25, 2016 Report Share Posted January 25, 2016 Hey, I just want to say how AWESOME my ANH E-11 is! I give these guys 2 BIG thumbs up. Their customer service is impeccable and I received mine a lot sooner than expected which was a plus! Thanks Again for an great product. Quote Link to comment Share on other sites More sharing options...
TK bondservnt[501st] Posted January 26, 2016 Report Share Posted January 26, 2016 Must be new on the market because I had never heard of them before. The pictures they post show the mould masters are scratch built from pvc pipes and other bits, but look decent. Will probably not hold up against castings from actual MG's, when comparing details. As usual, buyer beware. After close examination these are very well made products, yet lack some details I'd like to see included. Perhaps with some education the models can go into V.2... Good luck! Quote Link to comment Share on other sites More sharing options...
Griffin-X[TK] Posted January 26, 2016 Report Share Posted January 26, 2016 I own a DH-17 made by DSP and Chad. He's a good man and makes some decent blasters. Great communication and customer service, too. I'm sure he's open to some blaster tips and feedback Vern. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.