Rat

I didn't think much on the sniper plate as that particular issue is fairly common. Simple fix is to add a bit of material behind it to kick I forward a bit. Sent from my 5054N using Tapatalk

I couldn't remember where I had seen the solution to this issue. Thanks for filling that in. Sent from my 5054N using Tapatalk

For the hand guards do they have cloth backing? I got mine from Joseph and had no issues with em, but they have a layer of duck cloth imbedded in them. I just rough up the gloves a bit and no issue. Sent from my 5054N using Tapatalk

Hey Chris looking good. A couple of things I noticed is that your forearms seem a bit big, looks like you could do with trimming them a bit more for the circumference. You should have roughly a fingers width of gap but it appears you have a couple of inches. I also noticed that the left shoulder bell appears shallower than the right. The last thing that stands our is your left thigh looks a bit high and is catching beneath the butt plate. Other than those I can't see anything else that would need to be addressed. Good job on the build though. Sent from my 5054N using Tapatalk

And an added bonus action shot. Sent from my VK815 using Tapatalk

Boots, front side of wrists and adjustments to an-kidney on and off. If you need more let me know. Sent from my VK815 using Tapatalk

Ab buttons, left/right and front/back bridges and left and right drop boxes. Will get the wrists and boots shortly. Sent from my VK815 using Tapatalk

Here is this one just in case it is easier. https://www.whitearmor.net/forum/index.php?/topic/45567-TK-95970-ANH-Stunt-requesting-EIB-(Anovos)-[853] Sent from my 5054N using Tapatalk

And here is my EIB link. https://r.tapatalk.com/shareLink?url=https://www.whitearmor.net/forum/topic/45567-tk-95970-anh-stunt-requesting-eib-anovos-853/&share_tid=45567&share_fid=44557&share_type=t Sent from my 5054N using Tapatalk

Thanks Daniel I'm currently at work but here is the one for the mic tips and vocorder. The rest I can get once I'm home and I'll double check the left ab to kidney connections. Sent from my 5054N using Tapatalk

Finally submitted. Sent from my VK815 using Tapatalk

Mandatory Information Armor Maker = Anovos Helmet Maker = Anovos Blaster Type = THG props Optional Height = 5'10" Weight = 175 Boots Maker = TKBOOTS Canvas belt = Anovos Hand Plates Type = Silicon (justjoseph) Electronics = Fans, no vendor Neck Seal Type = Self made Holster Maker =Anovos EIB link = https://r.tapatalk.com/shareLink?url=https://www.whitearmor.net/forum/topic/45567-tk-95970-anh-stunt-requesting-eib-anovos-853/&share_tid=45567&share_fid=44557&share_type=t Alright I think that is all of them and now to wait just a bit longer. Sent from my VK815 using Tapatalk

Looking fabulous Lorelei. Your just stepping in and owning it. Sent from my VK815 using Tapatalk

What Daniel said. Normally a good gauge of spacing is a finger width or so. Sent from my VK815 using Tapatalk

Yeah I initially tried isopropyl and it did nothing so I ended up using mineral spirits. Sent from my 5054N using Tapatalk

Mineral spirits should be safe, but start with the isopropyl. Sent from my 5054N using Tapatalk

Easy basic and love the bells nice and tight. Sent from my VK815 using Tapatalk

Nice job. Sent from my 5054N using Tapatalk

I'll ditto Cranks response. Awesome work and cant wait to see that holster. Sent from my VK815 using Tapatalk

To be accurate everything should be done in a satin black minus the pistol grip and the fins on the barrel. You could do a hammered finish and then the satin. The pistol grip should be gloss black and the fins should be a matte/flat black. On the Sterling L2A3 the grip was plastic and this fins are a rubber. The inner barrel ejection port cylinder can be a brushed aluminium and the spring should be a steel color. Hope that makes sense and helps. Sent from my VK815 using Tapatalk

Looks awesome Lorelei. Sent from my 5054N using Tapatalk

Looking awesome Lorelei. Nice call on making the holster. Sent from my 5054N using Tapatalk

So far as undersuit anything that is black and form fitting is good. Nothing too specific needed other than no visible logos or markings. Boots any Chelsea boot that fits you will suffice. Some painting and treatment may be required. Sent from my VK815 using Tapatalk

Oh indeed, I just wanted to make a point on the shins and the stress they get put through. Sent from my VK815 using Tapatalk

Oh and as far as inner strips they help with stability and reinforcement. Though I would would highly suggest inner strips on the shins. They get a lot of stress from putting on and taking them off. Adding them will help prevent cracking. Sent from my VK815 using Tapatalk