StrmTRPR85[TK] Posted September 4, 2018 Report Posted September 4, 2018 (edited) Helmet/Armor Maker= Walt's Trooper Factory Blaster= Hyperfirm E-11 Height= 5'11" Weight= 175lbs Boots= Imperal Boots Belt= Imperal Outfitters Neck seal= Geeky Pinks Phantastic Neck Seals Electronics Fans= self made Voice= ROM/FX Hovi Tips= Ukswrath EIB Submission: Edited September 4, 2018 by StrmTRPR85 adding Link to EIB Quote
ukswrath[Staff] Posted September 4, 2018 Report Posted September 4, 2018 Hey Jeff welcome. While you're waiting for one of the DOs please post a link to your EIB application thread at the top of the page. Thanks 1 Quote
StrmTRPR85[TK] Posted September 4, 2018 Author Report Posted September 4, 2018 14 minutes ago, ukswrath said: Hey Jeff welcome. While you're waiting for one of the DOs please post a link to your EIB application thread at the top of the page. Thanks Done and done! Thank you Tony! Quote
ukswrath[Staff] Posted September 4, 2018 Report Posted September 4, 2018 Perfect , someone will be with you shortly Quote
magni[TK] Posted September 4, 2018 Report Posted September 4, 2018 Looks great! I would just lose the big tab on the ends of shoulder bridges. Good Luck! Quote
StrmTRPR85[TK] Posted September 4, 2018 Author Report Posted September 4, 2018 4 minutes ago, magni said: Looks great! I would just lose the big tab on the ends of shoulder bridges. Good Luck! I thought about it but i was concerned my straps would look too short than for my frame Quote
magni[TK] Posted September 4, 2018 Report Posted September 4, 2018 3 minutes ago, StrmTRPR85 said: I thought about it but i was concerned my straps would look too short than for my frame Good reason 1 Quote
TK-40996[TK] Posted September 5, 2018 Report Posted September 5, 2018 Goodluck with your centurion app !!! 1 Quote
justjoseph63[Staff] Posted September 6, 2018 Report Posted September 6, 2018 Hi Jeff! Could you do me a quick favor and post up a pic showing the screws on the bottoms of the ears? It's probably the angle of the photo, but it looks as if that they are round or pan-head style instead of the flat V head as seen on the top ones. I looked at the ones in your EI app photo but the pic is a bit fuzzy. If they need to be changed, just let me know and I will mail you a set no charge. Quote
StrmTRPR85[TK] Posted September 6, 2018 Author Report Posted September 6, 2018 Hope that picture is more clear. I couldn't think of a better way to show they are the v-head without taking them out. Let me know if anything else is needed Joseph!! 1 Quote
justjoseph63[Staff] Posted September 12, 2018 Report Posted September 12, 2018 Perfect! Thanks, and I will be with you shortly, sir! 1 Quote
justjoseph63[Staff] Posted September 18, 2018 Report Posted September 18, 2018 OK, Jeff.. FANTASTIC job on taking care of the issues from your EI application! Just one last thing and we can get you level 3, brother... I noticed that your left drop box needs to be aligned with the edge of your ammo belt. Please post up a new pic of that so we can get that Centurion badge under your name! Reference image 1 Quote
StrmTRPR85[TK] Posted September 18, 2018 Author Report Posted September 18, 2018 3 hours ago, justjoseph63 said: OK, Jeff.. FANTASTIC job on taking care of the issues from your EI application! Just one last thing and we can get you level 3, brother... I noticed that your left drop box needs to be aligned with the edge of your ammo belt. Please post up a new pic of that so we can get that Centurion badge under your name! Reference image Easy fix! Added some extra glue to the elastic and box strap behind the box and behind the belt. Clamped and should have a new picture for you tonight Quote
justjoseph63[Staff] Posted September 18, 2018 Report Posted September 18, 2018 Sounds like a plan, sir. I know it seems like a small thing, but it's the details that matter when you get to the higher levels. This is actually one of the most common issues we see, and fortunately it's a very easy fix with good ol' E-6000. 1 Quote
StrmTRPR85[TK] Posted September 18, 2018 Author Report Posted September 18, 2018 Your right it is a small thing. But its a small thing that MATTERS! Plus I have a troop this weekend so I will be trying on my kit tonight anyways to make sure all is good. Easy to snap a pic. Hope you can approve me by Saturday so I can troop with that centurion sticker on my tote 1 Quote
justjoseph63[Staff] Posted September 18, 2018 Report Posted September 18, 2018 As long as you get the pic posted tonight, I will make sure you have that Centurion badge first thing tomorrow morning! BTW, I appreciate you waiting to put the Centurion decal on your bin... that definitely shows character! 2 Quote
StrmTRPR85[TK] Posted September 19, 2018 Author Report Posted September 19, 2018 5 hours ago, justjoseph63 said: BTW, I appreciate you waiting to put the Centurion decal on your bin... that definitely shows character! Thank you sir! It's just not the same if I didn't earn it. Speaking of which, here is one fixed drop box Quote
TK 71627[TK] Posted September 19, 2018 Report Posted September 19, 2018 As long as you get the pic posted tonight, I will make sure you have that Centurion badge first thing tomorrow morning! BTW, I appreciate you waiting to put the Centurion decal on your bin... that definitely shows character! Someone is gonna be a CENTURION in the AM !!! Sent from my iPhone using Tapatalk Quote
justjoseph63[Staff] Posted September 19, 2018 Report Posted September 19, 2018 Welcome back, Jeff, and thank you for your patience and for your Centurion application. CRL and Centurion Application Requirements: All required submission photos are present. Thank you for making the suggested updates to the teeth, ab gap, hand guards, shoulder bells and that pesky drop box . Beautiful job on your build Trooper . We are pleased to announce your armor displays all the necessary requirements as set out in the CRL. On behalf of the D.O. Staff, congratulations and welcome to Centurion! Other-Armor Fit/Assembly: Just a few items here, sir. When suiting up, always double check the evenness of your thighs. If a mirror isn't available, you can always ask a fellow Trooper if the tops are level. A small detail, but one that adds up to a much more polished look. You really should raise the brow on your bucket, brother. It looks more Hero than Stunt... Reference images Your vocoder could use some extra paint to extend the 2nd and 6th bumps. This would be a lot closer to screen accuracy. Reference images Nothing more to add, brother, except to get that Centurion decal on your bin! Excellent job Quote
TK 71627[TK] Posted September 19, 2018 Report Posted September 19, 2018 Welcome back, Jeff, and thank you for your patience and for your Centurion application. CRL and Centurion Application Requirements: All required submission photos are present. Thank you for making the suggested updates to the teeth, ab gap, hand guards, shoulder bells and that pesky drop box . Beautiful job on your build Trooper . We are pleased to announce your armor displays all the necessary requirements as set out in the CRL. On behalf of the D.O. Staff, congratulations and welcome to Centurion! Other-Armor Fit/Assembly: Just a few items here, sir. When suiting up, always double check the evenness of your thighs. If a mirror isn't available, you can always ask a fellow Trooper if the tops are level. A small detail, but one that adds up to a much more polished look. You really should raise the brow on your bucket, brother. It looks more Hero than Stunt... Reference images Your vocoder could use some extra paint to extend the 2nd and 6th bumps. This would be a lot closer to screen accuracy. Reference images Nothing more to add, brother, except to get that Centurion decal on your bin! Excellent job Allow me to be the FIRST to congratulate you Jeff....we practically started at the same time ( a month apart ) ... congrats BROTHER.... i will be submitting VERY SOON as well !!! Sent from my iPhone using Tapatalk Quote
StrmTRPR85[TK] Posted September 19, 2018 Author Report Posted September 19, 2018 3 hours ago, justjoseph63 said: Welcome back, Jeff, and thank you for your patience and for your Centurion application. CRL and Centurion Application Requirements: All required submission photos are present. Thank you for making the suggested updates to the teeth, ab gap, hand guards, shoulder bells and that pesky drop box . Beautiful job on your build Trooper . We are pleased to announce your armor displays all the necessary requirements as set out in the CRL. On behalf of the D.O. Staff, congratulations and welcome to Centurion! Other-Armor Fit/Assembly: Just a few items here, sir. When suiting up, always double check the evenness of your thighs. If a mirror isn't available, you can always ask a fellow Trooper if the tops are level. A small detail, but one that adds up to a much more polished look. You really should raise the brow on your bucket, brother. It looks more Hero than Stunt... Reference images Your vocoder could use some extra paint to extend the 2nd and 6th bumps. This would be a lot closer to screen accuracy. Reference images Nothing more to add, brother, except to get that Centurion decal on your bin! Excellent job Thank you Joseph! I'll definitely touch up the paint a smidgen. I've been meaning to get a small portable mirror to stash in my tote for such occasion as double checking fitment. The brow I may move it up a tad It's been a great build for the past year! Starting this all in January and finally completing my goal now. I'm proud I get to represent the FISD as an attache and now at the highest approval level! Quote
gmrhodes13[Staff] Posted September 19, 2018 Report Posted September 19, 2018 Congratulations trooper 1 Quote
StrmTRPR85[TK] Posted September 20, 2018 Author Report Posted September 20, 2018 5 hours ago, magni said: Congratulations Jeff! 4 hours ago, gmrhodes13 said: Congratulations trooper Thank you! Quote
giskard8[Staff] Posted September 20, 2018 Report Posted September 20, 2018 Congratulations Jeff 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.