skyone Posted February 21, 2019 Author Report Share Posted February 21, 2019 (edited) just note i made an easy assembly board to make the work easier and better. Just succesfully completed its testing, the sound is loud and clear, no clipping or noise, thanks to PCB connections. With this board it will be easier to fit arduino and their components inside the PVC pipe, saves extra cables and work, no mistakes. Size WxLxH mm main unit: 91x29x21.8 drivers module: 41.5x29x18.70 bar leds module: 35.5x19.5x9.85 Edited March 12, 2019 by skyone 3 Quote Link to comment Share on other sites More sharing options...
inigohe Posted March 3, 2019 Report Share Posted March 3, 2019 Best regards from Spain... First of all great job yours... I have in my hardware teensy 2.00 ++ hardware, yes I know it´s not arduino but I can programe it using arduino code, the only thing it´s will change the pinout position. The trouble it´s when I compiled your .ino files...appears errors, seams to fault the libraries or some similar stuff to complete the compiling process. Here quoted I show you the compilling message .txt. Thx a lot for your kinddly attention. The first one pcb its mine. Quote Arduino:1.8.8 (Windows 7), TD: 1.45, Tarjeta:"Teensy++ 2.0, Serial, 16 MHz, US English" sketch_mar03b: In function 'void setup()': sketch_mar03b:234: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b: In function 'void loop()': sketch_mar03b:271: warning: comparison between signed and unsigned integer expressions if ((millis() - start_hold) >= HOLD_DELAY){ // for longer than x/1000 sec(s) ^ sketch_mar03b:276: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:285: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:318: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); // single and no cycle ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:351: warning: suggest parentheses around comparison in operand of '&' if (buttonPushCounter2 >= 17 & buttonPushCounter2 <= 20) { ^ sketch_mar03b:441: warning: suggest parentheses around comparison in operand of '&' if (buttonPushCounter3 >= 17 & buttonPushCounter3 <= 20) { ^ sketch_mar03b:699: warning: comparison between signed and unsigned integer expressions if(currentMillis - previousMillis > interval) { ^ sketch_mar03b:802: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:879: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:959: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1052: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1155: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1266: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1330: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1344: warning: comparison between signed and unsigned integer expressions if(currentMillis - previousMillis > interval) { ^ sketch_mar03b:1389: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1415: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1481: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1538: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b:1582: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b: In function 'void empty_classic_weapon()': sketch_mar03b:1648: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b: In function 'void ping_garand()': sketch_mar03b:1658: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b: In function 'void reload_ammo_classic()': sketch_mar03b:1668: error: call of overloaded 'write(int)' is ambiguous Serial.write(0x00); ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2:0, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:18:17: note: candidate: virtual size_t usb_serial_class::write(uint8_t) virtual size_t write(uint8_t c) { return write(&c, 1); } ^ In file included from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Stream.h:24:0, from c:\program files\arduino\hardware\teensy\avr\cores\usb_serial\usb_api.h:6, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/usb_api.h:2, from C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/WProgram.h:22, from C:\Users\MARIAN~1\AppData\Local\Temp\arduino_build_726041\pch\Arduino.h:1: C:\Program Files\Arduino\hardware\teensy\avr\cores\teensy/Print.h:48:9: note: candidate: size_t Print::write(const char*) size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } ^ sketch_mar03b: In function 'void statusCounter6()': sketch_mar03b:1678: warning: comparison between signed and unsigned integer expressions if(currentMillisAmmo - previousMillisAmmo > intervalAmmo) { ^ call of overloaded 'write(int)' is ambiguous Este informe podría contener más información con "Mostrar salida detallada durante la compilación" opción habilitada en Archivo -> Preferencias. Quote Link to comment Share on other sites More sharing options...
skyone Posted April 13, 2019 Author Report Share Posted April 13, 2019 (edited) edit Edited April 13, 2020 by skyone Quote Link to comment Share on other sites More sharing options...
RankAndFileTrooper Posted April 15, 2019 Report Share Posted April 15, 2019 Thanks skyone for the heads up! We in the lightsaber building community struggled a lot with fake DFPlayers in the past until we found out that the market is swamped with fakes. Quote Link to comment Share on other sites More sharing options...
joby619[TK] Posted May 22, 2019 Report Share Posted May 22, 2019 Does anyone know where I can get the sound files? I PM,d skyone last week but he hasn’t been on for awhile. Quote Link to comment Share on other sites More sharing options...
RankAndFileTrooper Posted May 23, 2019 Report Share Posted May 23, 2019 Look here: https://github.com/Protonerd/FX-BlasterOS/tree/master/Sounds/FXBlasterOS_SF1_E11 You might need to reshuffle the order of the files but this link contains a full blaster sound set. Check from time to time for updates, as later on I might release new ones. Quote Link to comment Share on other sites More sharing options...
joby619[TK] Posted May 29, 2019 Report Share Posted May 29, 2019 On 5/23/2019 at 12:47 PM, RankAndFileTrooper said: Look here: https://github.com/Protonerd/FX-BlasterOS/tree/master/Sounds/FXBlasterOS_SF1_E11 You might need to reshuffle the order of the files but this link contains a full blaster sound set. Check from time to time for updates, as later on I might release new ones. Thanks for the link to your open source blaster Andras. I’ve built one of those boards too with your help. I am hoping to find the sounds for this blaster project because this one has sounds like tie fighter, X-wing and many more that I can’t find elsewhere. Hopefully Skyone or something else has the sounds files for this blaster. Thanks again. Quote Link to comment Share on other sites More sharing options...
skyone Posted June 28, 2019 Author Report Share Posted June 28, 2019 (edited) On 5/22/2019 at 4:33 PM, joby619 said: Does anyone know where I can get the sound files? I PM,d skyone last week but he hasn’t been on for awhile. just send me a PM and i will send you the link with the zip file to download (sent you) IMPORTANT NOTE ABOUT THE PROJECT: i fixed the RESISTOR value between the MP3 Player (DF Player) and Arduino, it must be 1 KOHM instead of 10KOHM or the DF player (and clones) wont work fine or at all! Edited June 28, 2019 by skyone Quote Link to comment Share on other sites More sharing options...
misterl777 Posted October 14, 2019 Report Share Posted October 14, 2019 On 2/22/2019 at 12:07 AM, skyone said: just note i made an easy assembly board to make the work easier and better. Just succesfully completed its testing, the sound is loud and clear, no clipping or noise, thanks to PCB connections. With this board it will be easier to fit arduino and their components inside the PVC pipe, saves extra cables and work, no mistakes. Size WxLxH mm main unit: 91x29x21.8 drivers module: 41.5x29x18.70 bar leds module: 35.5x19.5x9.85 On 2/22/2019 at 12:07 AM, skyone said: just note i made an easy assembly board to make the work easier and better. Just succesfully completed its testing, the sound is loud and clear, no clipping or noise, thanks to PCB connections. With this board it will be easier to fit arduino and their components inside the PVC pipe, saves extra cables and work, no mistakes. Size WxLxH mm main unit: 91x29x21.8 drivers module: 41.5x29x18.70 bar leds module: 35.5x19.5x9.85 hi i am new to all of this where can i buy the green boards? Quote Link to comment Share on other sites More sharing options...
skyone Posted April 13, 2020 Author Report Share Posted April 13, 2020 (edited) updating this project a bit, i canceled the led drivers and moved to 3 transistors + 3 resistors 1/2w to control the 3watt RGB super bright leds i will post more updates with the scheme Edited April 13, 2020 by skyone 3 Quote Link to comment Share on other sites More sharing options...
darthcue[TK] Posted April 16, 2020 Report Share Posted April 16, 2020 Is your easy assemble board available for purchase? Sent from my LYA-L29 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
skyone Posted April 25, 2020 Author Report Share Posted April 25, 2020 On 4/16/2020 at 5:13 AM, darthcue said: Is your easy assemble board available for purchase? Sent from my LYA-L29 using Tapatalk i have to finish the E11/sterling model first, to make boards 100% compatible with spaces, speakers, led and buttons 1 Quote Link to comment Share on other sites More sharing options...
darthcue[TK] Posted April 25, 2020 Report Share Posted April 25, 2020 i have to finish the E11/sterling model first, to make boards 100% compatible with spaces, speakers, led and buttons I will wait for this... Sent from my LYA-L29 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hesikaya[TK] Posted August 12, 2020 Report Share Posted August 12, 2020 How is the progress coming? I have another blaster project and am looking forward to this nifty innovation. Quote Link to comment Share on other sites More sharing options...
deputyd0ng Posted September 1, 2020 Report Share Posted September 1, 2020 Is this board on oshpark? Quote Link to comment Share on other sites More sharing options...
skyone Posted October 1, 2020 Author Report Share Posted October 1, 2020 (edited) On 8/12/2020 at 9:33 AM, Hesikaya said: How is the progress coming? I have another blaster project and am looking forward to this nifty innovation. i just tested the new pcb board where i replaced the led drivers with 3 small transistors and it was working fine if there wasn't an error on the original scheme (i used a differente transistor schematic) so i have to reprint another stock Edited October 1, 2020 by skyone 3 Quote Link to comment Share on other sites More sharing options...
budu1[501st] Posted January 17, 2021 Report Share Posted January 17, 2021 Hey this is agreat E-11.. And what about for the people that can not made de 3d chasis... There is somewhere to buy this spectacular Blaster?? Regards, Thanks and good work.. Quote Link to comment Share on other sites More sharing options...
Syntaxerror[TK] Posted May 15, 2021 Report Share Posted May 15, 2021 Hi all, I have accidently purchased 3x 700mA Constant Current Regulated LED Driver, rather than 3x 350mA Constant Current Regulated LED Driver. Can this still be used or any modification needed? Quote Link to comment Share on other sites More sharing options...
cesark3[TK] Posted June 17, 2021 Report Share Posted June 17, 2021 wooooww excelente! Quote Link to comment Share on other sites More sharing options...
lordteddius Posted July 30, 2021 Report Share Posted July 30, 2021 Hello, I am a member of the spanish garrison and I am making my e-11 blaster with 3d printing, I am looking for the sounds of this project since I like that it has several such as tie etc. Can someone help me get them? Thank you very much in advance 1 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted July 30, 2021 Report Share Posted July 30, 2021 50 minutes ago, lordteddius said: Hello, I am a member of the spanish garrison and I am making my e-11 blaster with 3d printing, I am looking for the sounds of this project since I like that it has several such as tie etc. Can someone help me get them? Thank you very much in advance Standard Stormtrooper blaster sound effects links: Stun http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_09.mp3 Kill http://play.starwars.com/starwars_soundboard/asset/audio/BSR_blasters/blast_10.mp3 Quote Link to comment Share on other sites More sharing options...
Mivay Posted August 2, 2022 Report Share Posted August 2, 2022 @skyone i was wondering if i might get the zipfile of your sounds for my build ... thanks Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted August 2, 2022 Report Share Posted August 2, 2022 27 minutes ago, Mivay said: @skyone i was wondering if i might get the zipfile of your sounds for my build ... thanks You can find a lot of the sounds here: Also here: https://github.com/Protonerd/FX-BlasterOS/tree/master/Sounds Quote Link to comment Share on other sites More sharing options...
Commander Code[TK] Posted August 18, 2022 Report Share Posted August 18, 2022 Anyone have 3d print plans to account for the space to install one of these systems? So one can have it printed and be ready for install. Quote Link to comment Share on other sites More sharing options...
Hesikaya[TK] Posted August 26, 2022 Report Share Posted August 26, 2022 On 8/17/2022 at 7:08 PM, Commander Code said: Anyone have 3d print plans to account for the space to install one of these systems? So one can have it printed and be ready for install. I haven't seen any that specifically have the space designed to account for electronics but these parts are pretty small. There are some good files on Thingiverse which you can find in the thread I attached. I made enough room to stick electronics into a doopydoo kit but they seem nearly impossible to get nowadays. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.