TKSpartan

Welcome to the FISD MEME LAND

Thank you Tiffany, I'll be with you shortly.

Yes ! welcome back brother ! Hope everything is well with you.

Hi Tiffany, I have started your review and will need you to do me a favor. Could you please add a couple of photos as follow? 1- Close photo of the Ab buttons plates . like bellow 2- Close Photo of the Left side Ab-Kidney rivets. Thank you.

Great ! Thank you.

looking good

Hi , Yes they are ok.

Before we can start your review , we need you to make a couple of fixes to your armor: 1- As per the CRL for L2: "Clips shall be attached with slotted type, flat or dome top style screws, and be black (two per clip). V head screws are not permitted." Your looks to be V head screws and you will need to change them. References 2- CRL L2: " Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). It looks like yours are " Chicago Screw " and will need to change to the Double or single cap ones. References

Hi Tiffany, Thank you for applying for EIB. Your submission has been added to the processing line and one of us will be with you as soon as possible.

Hi Ed, some photos would definitely help. Take a look to the following tutorial using Imgur as Photo host.

Welcome aboard !

Congratulations Trooper !! Enjoy

Found this video, take a look

Hi, As I know, you can change your display name on your own for three times. 1 - Go to your Profile ( right upper corner where your image displays) 2- Select Account Setting 3- Select Change (right side next to your display name) 4- Save. If you have any issue let us know.

Hi Thomas welcome to FISD. Glad to read you're ready to start your path to the shiny white world! Bellow a link to a very useful index that may serve you well. When ready, open your own build thread and ask all your questions, post photos and receive feedback. Good luck.

This is the last resource, as you said, the plastic could melt .

If you have some ABS pieces from scrap, I would strongly recommend to make some test first. Hot water (boiling), Heat gun , and see how the plastic behave in each test.

Hi Jan, this is a common issue . The RS shins don’t normally meet at the rear top ridge until the rear fixings are in place . You can try adding the velcro and see how they match. Plan b would be to give a hot water bath to the misaligned side to match the other one. A complete photo would be good.

Nice work.

Yes!!!

Nice work, Hope it works great ! I had to change the velcro for Magnets. The pressure when placed the chest piece made it pop up.

Awesome news ! You may want to check the gallery section or post here before (any drilling) attaching the rivets .

I agree what Glen suggested. ( a little battle damage is allowed ) and I'm afraid If you keep on sanding and applying abs paste the cure could be worse than the ill