tarok

Good luck with your build. Lots of great resources right here which the folks have shared above. Seems like your armour might have been stored for a while - it’s getting that Anovos yellowing in spots. Nothing a peroxide treatment won’t solve [emoji846] If you’re intending to later apply for Level 3 Centurion your helmet may not pass due to the seperate vocoder - just a FYI and if you’re so inclined [emoji846] I struggle with the mortise-pestle snap tools, so I bought a Prym Vario Tool which has the capability for a fitting for snaps. https://www.amazon.com/Prym-Vario-Pliers-79-5-Purple/dp/B000P1ASDI/ref=mp_s_a_1_2?crid=1GR8GCK0IP6FU&dib=eyJ2IjoiMSJ9.b9-8SWYw19u3qPkwBq7Pr5HLk6_8rfCKKdIKXMkdN5qD3Opp35EDrHzcvgUlLxygmJsAEMHNCybOAsmM8nU70iC51MVZAP-xBnZiiKBuQezMTcrHA43e9r_mtFdO6GJEFbdqSPHy1fEXzuKEd14p_-yXtK-1oQ5xYdoO3v0eNIGBYcU2QPMpcAVQYtJHuQzG0aDuwEKYtHDKnRlNesjGKw.yOcmpAg6exBE5z4DMsS0jPT1h9_gqrDodot5Wm-lmpI&dib_tag=se&keywords=prym+vario+pliers&qid=1713053831&sprefix=prym+vario+%2Caps%2C694&sr=8-2 Prym include the fitting with their snaps. I used the camping snaps, but they’re very similar to the heavy duty anorak snaps. https://www.amazon.com/Prym-390332-Non-sew-Fasteners-Goldfarbig/dp/B00E4IWQVU/ref=mp_s_a_1_33?crid=T5S60F481KDR&dib=eyJ2IjoiMSJ9.J6X4bTwRAc2hG33RB7xecoS1u8liB1uTj5E8_2W_lFd7pO8AQi8QBNmSAeEjQhhefxgjPxgKuLIyC6Ah4qULbTzu_SYJmZNjnmL_ldFl8O96eaPvwnbROwTUi9mg8nJV9JHtBTlxFfd_uI0ZfEPCKNzYIDn0LImeaqsfGCuLt3jczY4m1J7qFNmZ7SzRFwwLjqzlDVjKVsPSR9zT190SOA.BJXJD6sXtQyb3LrOLPsd8Xf-GxjmixuHV5SFJcDvBzU&dib_tag=se&keywords=prym%2Bsnaps&qid=1713054157&sprefix=prym%2Bsnaps%2Caps%2C678&sr=8-33&th=1&psc=1 Sent from my iPhone using Tapatalk

Donated

It’s really a personal preference. I’m a fan of light to medium weathering. Your crate (which looks great btw) will also naturally weather over time as you drag it in and out your car, to events, etc. Sent from my iPhone using Tapatalk

If you head over to OddViking’s YouTube channel, he’s got a series covering these builds. He answers most of your questions there - and more [emoji4]

I think the belt sander was the only thing I bought specifically for my TK build. Reflecting though, I’d have bought a decent knife sooner. I used a couple of cheap knives initially before finding the perfect Stanley BigMax knife for me. The other thing is people talk about not enough clamps, but you can never have enough rare earth magnets either. Apart from that the only things one can’t buy: time and patience. Sent from my iPhone using Tapatalk

Congrats! Awesome build, and a fantastic addition to FISDs CRLs [emoji4] Sent from my iPhone using Tapatalk

G’day Ian I’ve just replied to your post over in Knightfall, but good to see you here! Looks like you’ve already been given a good few starting links. Most of your parts will come from OS, however your under suit and building supplies can be sourced locally. Btw, I’m the FISD attaché to Knightfall, so please do reach out if I can be of help too [emoji4] Sent from my iPhone using Tapatalk

Perhaps a controversial topic, but I’d love to see more garrisons spending time auditing their members for costume quality and, dare I say it, ownership too… Sent from my iPhone using Tapatalk

They can have their moment, in my state TKs get more high fives and cuddles than the NotVaders, and that’s all that matters [emoji4] Sent from my iPhone using Tapatalk

I use compression gear from Aldi and Kmart. Works just fine [emoji4] Sent from my iPhone using Tapatalk

Nice to see you back at this build Dylan! Sent from my iPhone using Tapatalk

Very sad news to wake up to. RIP Dan. Condolences to the family. Buckets off. Rudi Sent from my iPhone using Tapatalk

2023/04/23 SupaNova Melbourne 2023, Melbourne VIC

Good to have you still with us, mate! Sent from my iPhone using Tapatalk

I don’t wear my current glasses with my TK helmet, however my previous pair had a “sports frame”. They were a narrower frame, with the arms quite close/tight. I could wear those quite comfortably under a TK bucket, as well as a fencing mask. Sent from my iPhone using Tapatalk

Happy holidays to all, whichever and however you celebrate, to you all and yours [emoji4] This is truly a unique, and inclusive space. Well done to all for making it so! Sent from my iPhone using Tapatalk

Phenomenal! Well done! Do you have a build thread somewhere? Would love to hear/read what your build process was. Sent from my iPhone using Tapatalk

I use a Stanley BigMax mobile tool box. A bit of Tetris and it fits a full TK plus helmet. Most importantly it fits in the boot of my car (a VW Golf) [emoji4] https://www.stanleytools.com.au/products/detail/PRODUCTS/STORAGE/Tool+boxes/FatMax%C2%AE+ProMobile+JobChest%E2%84%A2 I believe many, if not most, of our US brethren use Husky cases. Sent from my iPhone using Tapatalk

G’day Matt I intro’ed myself over on KFG, but great to see you here. Defo in the best place for all the right info and guidance. I’m the FISD Attaché to KFG so feel free to reach out for any local advice. Cheers Rudi Sent from my iPhone using Tapatalk

G’day from Melbs Always great to see more Aussies here Sent from my iPhone using Tapatalk

Haha, I “upgraded” my printer which lead to other issues… such as it not working [emoji23] And then I got distracted by another costume build [emoji2361] I should be back to this one in a couple of months though. Sent from my iPhone using Tapatalk

Looks great, mate! Enjoy Nova this weekend! Sent from my iPhone using Tapatalk

Hi Matt Welcome from Melbourne! You’re in good hands with the RBG [emoji4] Sent from my iPhone using Tapatalk

ALDI’s compression wear range is pretty good too for the price. It’s logo free too, and cheap enough that you can buy a few sets. Sent from my iPhone using Tapatalk

Fantastic! Thanks Joseph. I could make some comment about the inside yellowing first, but this is a family show [emoji23] lol I’m amazed how quickly my Anovos armour is yellowing (not to mention stress cracks). It’s not exposed to UV much and stored in the crate when not in use, yet I’m still seeing minor discolouration. Sent from my iPhone using Tapatalk