ukswrath

You're correct Germain, typo on my part. Corrected. I was dog tired when I posted this. Good catch

Looks like fun

Hey all, I was asked by a fellow garrison member to assembly his AM armor and decided to post the build process. Enjoy. Armor: AM 1.0 Helmet: MTK (Initial ATA build idea was scrapped and a MTK bucket was purchased already built. No helmet build will be illustrated sorry) Note: The original armor overlap connecting sections will be replaced with butt & strip found in current builds for Centurion level approval. The Chest and Back plates will be replaced for Centurion level approval. The Thermal Detonator was replaced for 501st basic approval and the thigh Ammo belt was replaced for aesthetics reasons. For the record, INNER COVER STRIPS illustrated in my build are NOT required NOR are they needed to assemble armor. In my opinion only they make the AM armor assembly much easier and give the interior a cleaner look, for those who care about such things. Tools: Pencil Exacto knives, large & small Scissors Steel straight ruler (metric) Dremel with sanding wheel or sand paper. Small carbide bit for helmet teeth or small file. 3M scotch brite pad (any color, gradient) Drill 5/32" & 1/8" drill bits Leather punch (5/32" tip) Rivet setting tool Hammer Screwdriver (blade) Spring clamps (set or 12 or more in various sizes) Earth magnets 1/2" x 1/8" (12.7mm x 3.1mm), 20 to 40 magnets Pop Rivet Gun Scrap 2" PVC pipe 2" washers with 1/2" hole Painters tape PPE (Personal Protective Equipment): I can't stress enough how important it is to wear PPE, especially when working with some of the tools listed above. Wear it! Safety glasses - Hardware store Cut resistant gloves - Hardware store 1/2 Respirator. Sanding releases small carcinogens into the air. Protect your lungs. - Hardware store or http://www.amazon.com/gp/product/B001NDN29O?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 Material: E6000 - two to three+ 2oz tubes, or two+ 3oz tubes Zap-A-Gap & Zip Kicker Nylon webbing - Black 1" wide (6' in length recommended) Elastic - White 2" wide (2' in length recommended) Elastic - Black 3/4" Paint: Gloss black: Humbrol # 21 Testors # 1747 Gray: Humbrol # 5 Testors # 1138 French Blue Humbrol # 14 Testors # 2715 1/8" x 1/4 Aluminum pop rivets. (waist belt) 1/8" Aluminum rivet washers (optional, waist belt) Snaps & Rivets: 1) Ab - "S" snaps (poppers) 15mm, (bag of 15 is the smallest)- http://www.ebay.com/...=STRK:MEBIDX:IT 2) Ab - "S" Snap die punch and set tool 15-17mm, (1x) - http://www.ebay.com/...=item5413a405e2 NOTE: For the "S" snaps and set tool kit you may need to contact the seller who is in the UK and have him set up a auction with US shipping. The original sales did not have a ship to US option at the time I purchased the items. 3) Thigh Ammo Belt - Double Cap Rivets (smallest bag available) - http://www.ebay.com/...=item35d9a33a26 or http://www.whitearmor.net/forum/topic/23970-fs-centurion-level-rivet-sets/or Hobby/Craft store. 4) Thigh Ammo Belt - Double Cap rivet tool (1x) - http://www.ebay.com/itm/DOUBLE-CAP-RIVETS-SETTER-8100-00-8056-00-Rivet-ANVIL-BASE-Tandy-Set-Tool-Kit-/301606252893?pt=LH_DefaultDomain_0&hash=item463922315d, or http://www.whitearmor.net/forum/topic/23970-fs-centurion-level-rivet-sets/, or Hobby/Craft store 5) Ab/Kidney - Split rivets (bag) - http://www.ebay.com/...=item3f34d5521b or http://www.whitearmor.net/forum/topic/23970-fs-centurion-level-rivet-sets/ 6) Ammo to cloth Belt - Pop Rivets (box) - 1/8" x 3/16", Amazon or any hardware store 7) Inner strapping - Line 24 snaps, nickle, 100ct (recommended), Tandy - https://www.tandyleather.com/en-usd/search/searchresults/1263-12.aspx. Fasnap - http://fasteners.fasnap.com/viewitems/snap-fasteners---screw-studs/standard-snap-fasteners? 7a) Inner strapping (canon brackets) Not illustrated in this build. For informational purposes only - http://www.whitearmor.net/forum/topic/20859-accurate-anh-stormtrooper-strapping-brackets-v-20-now-available/ 8) Shoulder to Bicep - Dritz Sew in Snaps, Nickle, Size #10 -http://www.amazon.com/Dritz-Sew--Snaps-Size-10/dp/B000A8BMDQ/ref=sr_1_fkmr2_1?ie=UTF8&qid=1437571813&sr=8-1-fkmr2&keywords=Dritz+4+Sew-On+Snaps+-Size+10&pebp=1437571823499&perid=1H34HYH1DNAAPPP1R3H1 Other: Thigh Garter belt - Canvas Belt - http://www.whitearmor.net/forum/topic/19803-fs-white-canvas-belts/ Inner Drop Boxes - http://www.whitearmor.net/forum/topic/8638-for-sale-inner-drop-boxes/ OR contact Terrell at ATA. Holster - http://www.whitearmor.net/forum/topic/16744-leather-e-11-holsters-35/ Gloves and hand guards - http://www.whitearmor.net/forum/topic/16744-leather-e-11-holsters-35/ Neck Seal - http://www.whitearmor.net/forum/topic/13511-for-sale-anh-hero-neckseal/ Sections: 1. Forearms FINISHED 2. Biceps FINISHED 3. Calves/Shins (lower leg) FINISHED 4. Ab FINISHED 5. Posterior FINISHED 6. Strapping FINISHED 7. Thighs FINISHED 8. Chest and Shoulders FINISHED 9. Shoulder Bells FINISHED 10. Thermal Detonator FINISHED 11. Belt FINISHED 12. Back Plate FINISHED 13. Kidney FINISHED 14. Fitment Alterations FINISHED 15. Final Pictures FINISHED 16. EIB Submit FINISHED 17. Centurion Submit Let's begin. 1. Starting with the Forearms (before trimming) 1a. Prepare forearms for trimming. NOTE: Forearms were marked during fitment. Inner forearms - Locate fitment markings. Identify areas to be removed. 1b. Remove inner forearm excess plastic. 1c. Outer forearms - Identify return edge. From return edge measure out 8mm. Mark location and prepare to cut off excess plastic. 1d. After trimming 1e. In this section we will install cover strips on the inner and outer forearm sections on the side that faces towards the front of your body. NOTE: I've found with armor like AM that uses over lap seams, when converting to butt & strip, starting with the sides that face the front or your body give the armor a cleaner look. NOTE: Prior to assembly leading forearm return edges (near elbow) were minimized and trailing return edges (near wrist) were removed. Fine tuning those areas will continue once the forearm assembly is complete. Clean both inner and outer forearm sections and prepare for assembly. 1f. Making INNER cover strips - Using excess material cut from initial trimming (or spare cover strip material) cut cover strips to 15mm, the same width in which the outer cover strips will be cut. Ready to assemble. 1g. Applying the E6000 glue and cover strips - Apply glue to either the forearm sides or the cover strip. 1g. Using two clamps at the outer edges and earth magnets in between, secure the inner cover strip. NOTE: Regarding E6000 glue drying times. There's been much debate over drying times, in my opinion given the correct conditions 24 hours is plenty of time. Afterwards continue working with the area however, I would put any heavy stress on it. That I would wait 48 hours. 2. Biceps. In this section we will measure, trim and begin to assemble the biceps Before trimming 2a. Preparing areas to be trimmed. As with the forearms, measurements taken for the initial fitment were identified. Starting at the return edge measure out 8mm and mark cut line. Remove excess plastic. 2b. After trimming 2c. Preparing to install the inner cover strips. NOTE: Like with the forearms we will install cover strips on the inner and outer forearm sections on the side that faces towards the front of your body. Clean both inner and outer bicep sections and prepare for assembly. Cut cover strips to 15mm, the same width in which the outer cover strips will be cut. Ready to assemble. 2d. Assembly. Apply glue to the bicep halves or the cover strip themselves, 2e. Using two clamps at the outer edges and earth magnets in between, secure the inner cover strip.

Ahh easy fix. Almost there

I would stick with your original pencil mark then trim as needed.

Correction..return edge allowed on the bicep side of the forearms, no return on the wrist side. This is from the CRL. If you don't mind me asking where did you get your info from? For level three certification (if applicable): No return edge on the inside of the front of the forearm is allowed.

Tracing and trimming will commence this weekend. I have a TK i'm building for someone at the moment that has priority but I'll squeeze the TFA in between glue curing. Just ordered 40 more magnets and picked up another clamp set so I can multitask lol

Zap-A-Gap, as much as I love the stuff it makes the hair on the back of my neck stand up every time I use it

Hey Sarah, well the first bit of advice I would like to give you is don't panic Take a deep breath, IN......., OUT...... now smile. See all better For the moment lets put the strapping system to the side, we won't need to consider that for a while. Let's talk plastic. Now before we get started let's go back and look at some TM builds. I've provided a couple links below. http://www.whitearmor.net/forum/topic/28263-ddays-tm-15mm-anh-stunt-build/ http://www.whitearmor.net/forum/topic/22362-my-project-from-a-tm-kit-to-a-tantive-iv-boarding-party-stormtrooper/ http://www.whitearmor.net/forum/topic/28302-my-2mm-tm-hero-helmet-build-82014/ You mentioned forearms, let's start there. Were here for questions, shoot.

Good point Brandon

Congrats Yess welcome to the Centurion ranks sir

Wow wasting no time, great job Peter

Well the boxes have begun to arrive. So excited http://i5.photobucket.com/albums/y200/ukswrath1/ANOVOS/TFA/Brown%20Box.jpg Tools: Exacto knifes (large & small) Lexan Scissors http://www.amazon.com/Duratrax-Body-Scissors-Reamer-3-Piece/dp/B007KN0RQM/ref=sr_1_2?ie=UTF8&qid=1441204195&sr=8-2&keywords=lexan+scissors&pebp=1441204247995&perid=1E2086K8TZ8RZFFQEB6K Optional but highly recommended: Dremel (or equivalent) http://www.amazon.com/WEN-2307-Variable-100-Piece-Accessories/dp/B00A8DXKXS/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1441204317&sr=1-2&keywords=dremel&pebp=1441204320209&perid=07G870JQ8R30T9MKD32X Optional but highly recommended: Dremel plastic cutting wheel http://www.amazon.com/Gyros-46-20199-Cutter-Dremel-8-Inch/dp/B000U5ZZXC/ref=sr_1_4?ie=UTF8&qid=1441204290&sr=8-4&keywords=dremel+plastic+cutter+wheel Optional but highly recommended: Dremel small carbide cutting bit, large and small sanding drums - http://www.amazon.com/gp/product/B002OTIZ4I?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Drill with 7/32" & 3/8" drill bits Steel ruler (large & small) http://www.homedepot.com/p/Unbranded-Cut-Resistant-Large-Gloves-7008-06/205813582 Square http://www.homedepot.com/p/Unbranded-Cut-Resistant-Large-Gloves-7008-06/205813582 40+ magnets http://www.ebay.com/itm/281363537848?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT 10+ assorted clamps http://www.homedepot.com/p/OLYMPIA-Clamp-Kit-14-Piece-73-293-107/205742057 Pencil Sharpie Optional but highly recommended: Belt Sander 4" x 36" - http://www.amazon.com/gp/product/B00NAXSYT8?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 Optional but highly recommended: Hand Sander http://www.homedepot.com/p/BLACK-DECKER-Mouse-Detail-Sander-MS800B/100671602 Optional but highly recommended: Hand Sander additional 220 grit finishing sand paper http://www.homedepot.com/p/Diablo-3-7-8-in-x-5-1-2-in-220-Grit-CAT-Mouse-Detail-Sanding-Sheet-with-Hook-and-Lock-Backing-DCTCAT220H05G/202830877 Optional but highly recommended: Hand Sander additional sanding and polishing pads (kit) - http://www.homedepot.com/p/BLACK-DECKER-Mouse-Sanding-Polishing-Kit-74-580/204735220 200 & 250 grit sanding blocks http://www.homedepot.com/p/3M-Pro-Grade-Precision-4-1-2-in-x-2-1-2-in-x-1-in-220-Grit-X-Fine- Optional: Heat Gun - http://www.amazon.com/1500-Watt-Temperature-572%C2%B0F-1112%C2%B0F/dp/B0053U2B8G/ref=sr_1_2?s=hi&ie=UTF8&qid=1442428572&sr=1-2&keywords=heat+gun Spot putty spreader - http://www.amazon.com/gp/product/B0002JMORQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s01 Material: 3M Scotch Bright pad (light grey, fine grit) Wet & Dry sand paper for final and pre-paint prep - 3M 26400PGP-4 - https://www.homedepot.com/p/3M-Pro-Grade-Precision-9-in-x-11-in-400-Grit-X-Fine-Advanced-Sanding-Sheets-4-Pack-26400PGP-4/205415931 Sanding block - http://www.homedepot.com/p/3M-2-5-8-in-x-4-3-4-in-x-1-1-4-in-Sanding-Block-9292NA-6-CC/100142732 Painter's tape http://www.homedepot.com/p/3M-ScotchBlue-1-88-in-x-60-yds-Advanced-Multi-Surface-Painter-s-Tape-with-Edge-Lock-2093EL-48N/203085525 E6000 http://www.homedepot.com/p/E6000-2-oz-Clear-Adhesive-6-Pack-237032/205382750?cm_mmc=shopping-_-googleads-_-pla-_-205382750&ci_sku=205382750&ci_gpa=pla&ci_src=17588969&gclid=Cj0KEQjwvJqvBRCL77m2-uKczsIBEiQAkx8VjKypOZN0aqqOK82w4MXdTzgcl6h3dPgSAOWUFl5vGfEaAh6C8P8HAQ&gclsrc=aw.ds CA glue (zap a gap) http://www.ebay.com/itm/Zap-PT-01-Zap-A-Gap-Medium-CA-Glue-2-oz-ounces-NEW-Unopened-/400775409865?hash=item5d501370c9, Zip kicker http://www.ebay.com/itm/Pacer-Technology-Zap-PT15-Zap-Adhesives-Zip-Kicker-2-oz-/131592610768?hash=item1ea387e3d0 Plexus MA310 epoxy (old mfg Devcon Plastic welder II 14340), x3 - https://www.amazon.com/Plexus-Purpose-Strength-Adhesive-cartridge/dp/B06ZY7KMWD/ref=sr_1_1?dchild=1&keywords=Plexus+MA310&qid=1587473596&s=industrial&sr=1-1 Epoxy gun x1 - https://www.amazon.com/MixPac-DMA50-Dispensing-Adhesive-Cartridges/dp/B00KACZ8AU/ref=sr_1_2?keywords=MixPac+DMA50&qid=1562526455&s=industrial&sr=1-2 Extra epoxy mixing tips (12 pack) - https://www.amazon.com/3M-38191-Static-Cartridges-Nozzles/dp/B00596QVHG/ref=sr_1_1?dchild=1&keywords=Mixing+Nozzle%2C+38191&qid=1587473788&s=lawn-garden&sr=8-1 Strapping (suspension system) & Connection Material: 2" wide Velcro, 3M Industrial Strength, (black), Gasket to armor connection (armor side) - http://www.homedepot.com/p/VELCRO-brand-4-ft-x-2-in-Industrial-Strength-Tape-90595/202261932. 1-1/2: wide (sew in, black) Velcro, Country Brook Design, Gasket to armor connection (gasket side) - http://www.amazon.com/Country-Brook-Design%C2%AE-Inches-Velcro%C2%AE/dp/B003KWUSV6/ref=sr_1_2?s=arts-crafts&ie=UTF8&qid=1449608909&sr=1-2&keywords=1-1%2F2%22+velcro 2" wide Velcro, 3M Industrial Strength (white), Armor to armor connection (Chest to yoke) - http://www.homedepot.com/p/VELCRO-brand-15-ft-x-2-in-Industrial-Strength-Tape-90198/202261920?MERCH=REC-_-PIPHorizontal1_rr-_-202261919-_-202261920-_-N 1" Nylon Webbing (black) - Assorted strapping (suspension) connections - http://www.amazon.com/gp/product/B001QL2C26?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 2" Nylon Webbing (black) - Assorted strapping (suspension) connections - http://www.amazon.com/gp/product/B003K1HK9A?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 1-1/2" Elastic (black) Yoke to Shoulder Bell connection - http://www.amazon.com/gp/product/B015OPFF3C?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00 5/8" (15mm) Elastic (black) - Left to right shoulder gasket connection - http://www.amazon.com/gp/product/B00NQ4O83W?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s03 5/8" (16mm) Nylon Ribbon (black) - Shoulder gasket connection anchor - http://www.amazon.com/gp/product/B00RQQLE60?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00 1/2" Rigilene Boning (black), Mesh suspension (strapping) - http://www.amazon.com/gp/product/B00GBIRQJS?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s03 2" Buckle (black), Strapping (suspension) Waist belt connection) - http://www.amazon.com/gp/product/B006MKS00O?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00 1' Buckle (black), Assorted strapping (suspension) connections - http://www.amazon.com/gp/product/B00IDBJH9I?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s01 5/8" (15mm) Buckle (black) - Left to right shoulder gasket gonnection - http://www.amazon.com/gp/product/B009X0KMV0?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s03 #24 Line Snaps, Yoke to Shoulder Bell - Tandy 12mm Double Cap Rivets (gun metal black), Shoulder gasket connection anchor - http://www.amazon.com/gp/product/B009X0KMV0?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s03 12mm Double Cap Rivets (nickle), Suspension Mesh to Ab - http://www.ebay.com/itm/121710367884?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT 1" Buckle, swivel / slide release, black, strapping (suspension), chest to back - http://www.ebay.com/itm/151146077829?_trksid=p2057872.m2749.l2649&var=450215821998&ssPageName=STRK%3AMEBIDX%3AIT 10x Chicago screws (Standard waist belt assembly) 1/4" 1/8" x 1/4" Pop rivet, Ab to lower suspension mesh boning - 2 spools Heavy duty nylon thread - 1 square yard mesh fabric - armor suspension (strapping) - American plastics - 6" x 6" 1.5mm+ cover strip material - armor suspension (strapping) connection point - ATA or other Accuracy Update Material/Hardware: Rubber Isolation/Vibration Pad - material behind Center Waist Belt Boxes - http://www.amazon.com/gp/product/B00IT650T8?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00 1/4" x 2" Neoprene - center layer of Waist Belt & Shoulder Plate (suspension system) - http://www.ebay.com/itm/170613703683?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Mesh - chest pill holes - http://www.whitearmor.net/forum/topic/34176-fs-ukswraths-fo-chest-pill-box-fabric-mesh/ Gaffers tape - material behind Pill Holes - http://www.amazon.com/gp/product/B00GZE3UJ8?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 1/4 x 20 x 2" nylon bolts - Ab box mounting - 1/4 x 20 nylon nut - Ab box mounting - Chicago screws (belt with 1/4" neoprene section and 1" tall center box rubber mounts) - Center belt boxes 3/4", Right side boxes 1/2", end of belt near buckle 3/8" Pre Paint & Paint: PPG DFL1 Spot Putty - You local auto body supply store 3M Spot putty - https://www.amazon.com/3M-05095-Acryl-White-Putty-Tube/dp/B003P6I5KS/ref=sr_1_5?ie=UTF8&qid=1467760849&sr=8-5&keywords=Spot+Putty Poly-Flex flexible polyester glazing putty - http://www.amazon.com/gp/product/B000P6US6A?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 ANOVOS recommended (rattle can) - RUST-OLEUM 249090 Gloss White - http://www.homedepot...49090/202071066 Primer - Rust-Oleum 249145 Professionally Painted - Paint, Clear and Hardener - http://www.whitearmor.net/forum/topic/31877-ukswraths-tfa-build-thread-tk-10116/?p=447887 Extras: F-11D - (DIY) http://www.whitearmor.net/forum/topic/41203-f-11d-resin-kits/. F-11D complete - https://www.etsy.com/listing/245791161/f-11d-blaster-11-scale?ref=shop_home_active_4 Boots & Gloves - Imperial - http://www.imperialboots.com/# Under suit, Gloves & Neckseal - https://www.stormtrooperundersuit.com/star-wars-first-order-stormtrooper-apparel-site.html Gaskets - Imperial gaskets - http://www.whitearmor.net/forum/topic/31019-imperial-gaskets-more-upgrades/ Gaskets - Jimmi - Chest pill hole fabric - http://www.whitearmor.net/forum/topic/34176-fs-ukswraths-fo-chest-pill-box-fabric-%20mesh/ Hard Hat Liner - Home depot - http://www.homedepot.com/p/3M-White-Hard-Hat-with-Pin-Lock-Adjustment-CHH-P-W12/202195392 Steel Holster kit - Available through The New Order Facebook page -https://www.facebook.com/groups/FirstOrderStormtoopers/ Pauldron - http://www.whitearmor.net/forum/topic/35470-fotk-vinyl-pauldron/ Cooling - http://www.whitearmor.net/forum/topic/35994-ukswraths-cooling-fan-kits/ Audio system - http://www.whitearmor.net/forum/topic/32951-interest-check-ukswraths-tfa-helmet-audio/ SHA system (hearing aid) - http://www.whitearmor.net/forum/topic/32487-ukswraths-stormtrooper-hearing-assist-system/ PPE Cut resistant gloves http://www.homedepot.com/p/Unbranded-Cut-Resistant-Large-Gloves-7008-06/205813582 Latex gloves http://www.homedepot.com/p/KLEENGUARD-Disposable-Blue-Nitrile-Gloves-X-Large-90-Count-57374/202798509 Safety Glasses Important SAFETY information, PLEASE READ!! So many chemicals that are used to assembly armor are toxic. Products like adhesives, fillers, paint, sanding byproducts, these are all toxic to your health and may cause cancer or organ damage over long periods of exposure. I can't stress enough how important it is when using these products to do so in a well ventilated area and/or wear a proper respirator. NOTE: When sanding a well ventilated area in NOT good enough, USE A RESPIRATOR suited for the job. TFA CRL - http://www.501st.com/databank/TK_-_First_Order Build Chapters Ab Boxes Ab Boxes: final assembly Belt Belt pt 2 Belt Accuracy (part 1) Belt Assembly Accuracy (part 2) Belt Assembly Accuracy (part 3) Biceps Biceps Accuracy (Part 1) Biceps Accuracy (Part 2) Chest Plate Indent Mod Chest Plate Accuracy Mod Chest Plate Accuracy Mod pt 2 Chest Plate Accuracy gap fill 1 Chest Plate Center and Pill Boxes Chest Plate Accuracy gap fill 2 Chest to Yoke attachment Forearms Forearm cont Gaskets Gaskets: thigh to shin Greeblies (clips) Hand Plates Holster Knee Caps Paint Code Paint prep: gap fill and sanding Paint Prep cont Shins Shin Accuracy Shin Closure Shoulder Bells Shoulder Bell Accuracy Shoulder Bell Accuracy pt 2 Shoulder Bell Accuracy: gmrhodes alt Spats Spats pt 2 Strapping: ab to cod Strapping: ab to posterior Thermal Det Thermal Det decals Thermal Det mounting Thighs Torso Torso: suspension system Torso: suspension system details Torso: suspension system details pt 2 Torso: suspension system details pt 3 Torso: suspension system details part 4 Yoke (shoulder + back) Yoke Re-enforcement 501st submission pictures Special thanks to Chris (Jancelot) for his organizational skillz

Very nice Markus, this should be an easy pass

Russell where's your EIB submit? Let's do this

Nice job Taylor. Mark is correct regarding the ear thickness, thinner would be a bit more canon however, it shouldn't effect EIB or Centurion

Roger is correct

Very nice Tim, very nice I'm assuming these are the pics to shot up to our GML also correct? Beautiful

No problem at all, Centurion here you come. Congrats trooper, well done sir.

Alright Tommy, knew you could do it brother, welcome to the ranks trooper

Yup, looks like a 'D" ring to me

Nice!

SWEET! Congrats Rid Welcome to the ranks trooper

Almost there Tommy

ah hahaha Awesome I want it!