All Activity

I've removed this from the Over skirt section. Otherwise the rest is unchanged.

At this time all First Order armour kits require at least some filling of seams to be clearable. The holster can be found here, though a non-functional one is included in the DN kit. A full list of resources is here in the First Order section

Event: # 23 Event Name: Sunrise WALKS Location: Sunrise day camp, Wheatly Heights, N.Y. Date: 06/02/24

Thank you very much on updating the ranking. I did help the following members for basic clearances Jim @gijim - TK-28888 - MTK ANH Stunt Grave Wong @MrGrave - TK-36036 - MTK ANH Stunt Galton Ho @Galton - TK-28823 - TM ANH Stunt Tiffany Wong @rabbitiff - TK-92230 - MTK ANH Stunt I will try getting their endorsement.

Hi Sly, based on having to modify the armor heavily is there any alternative TFA armors that don't need lots of mods? I'm trying to avoid having to do lots of mods. Is the Denuo Novo armor currently sold the website TFA or TLJ? Where can I get a holster for my SE-44C? I saw a link on the list in vendors. However, it was from years ago so I wasn't sure if the holsters are still for sale. Thanks

Hi Skylar The Gaskets are fine for both basic approval and our next level up Expert Infantry. They are PVC not rubber, which is the requirement for our level 3 Centurion. As it stands, the DN ready to wear armour is not out of the box 501st approvable. It has several pieces that are separate which need to be joined using ABS paste needs scrap ABS that is the same white as your armour (no need for painting but does need sanding and polishing) or Bondo then the armour painted. There are side seams not allowed, and there are the joins across the top of the shoulder areas also not allowed as per the CRL, which is what you should be following to gain 501st approval. Looks like you have most of the parts needed and are on your way. Just make sure you ordered the TFA armour to match the TFA helmet you have. Some of the parts are different between them and the TLJ FO TK https://databank.501st.com/databank/Costuming:TK_-_First_Order

Hi everyone, I'm still in the process of getting everything together. I want to make sure I'm on track to at least met some requirements for approval. If I'm doing something wrong please let me know. Here's what I got so far: Helmet: Denuo Novo TFA Premier with ukswrath audio kit and fans Armor: Denuo Novo Ready to Wear (Preordered shipping hopefully soon) Undersuit: https://www.etsy.com/listing/857740699/first-order-stormtrooper-costume-armor Boots: ImperialBoots Gloves: EndorFingers Blaster: F11-D (WIP going for Centurion) Neck Seal: Denuo Novo Pauldron: Denuo Novo Pouches: Denuo Novo Some of the soft pieces are coming with the Denuo Novo ready to wear like the pouches. I'm not sure if those are approvable or not. As for the other questions.The things I have currently, does any of it meet standards? What do I need to ditch, buy, modify? I'm also looking to get a few more things such as: Shoulder Bell - Ukswrath (Etsy) Rubber Arm/Legs Gaskets - https://www.etsy.com/listing/1586440291/first-order-stormtrooper-shoulder-elbow SE-44C Holster - ???? (Where) Am I missing anything else essential? Are the rubber gaskets listed above 501st approvable? Where can I find a holster in 2024? Thanks everyone! I'm a noob to all of this.

Bit more done

Finished my new Enoch helmet last night And here are both in comparison, new left, old right

UPDATE: WIP Second draft with changes to written descriptions. Still a few items out of place requiring repositioning, but this is why we do updates. Please feel free to offer suggestions. CRL Header info Under the leadership of Moff Gideon, a new class of elite soldier has been formed from remnant Imperial troops still loyal to the cause. Highly trained in the use of multiple advanced lethal Mandalorian weaponry and clad with Beskar armor, makes them a formidable adversary. Helmet The lens is smoky gray or black in color. The lens must be sufficiently dark enough to obscure the costumer's eyes. Two black aerators are present on each mandible end, which are dark grey color. Four recessed tube stripes are present on each side of the mandibles. A diamond shape black greeblie is present in the recessed mouth section between aerators. The nose section is black and separates the cheek plates. The nose section has a series of stripes and a single one that links the recess presents on each cheek. The upper cheek is white and has a recess line running across the nose. The lower cheek is recessed and has two sections that forms a V-shape. The upper portion is black, and the lower portion is dark grey. The brow is black, protrudes from the dome and extend to the ear caps. The top of the helmet is dome shaped and white color. A medium grey rectangular section runs along on each side of the dome and separate the front and the rear sections. A medium grey ear cap protrudes from the main rectangular section and contain a gloss white clip greeblie. The rear section is medium grey, starts below the dome shape and has a protruding band that joins the two middle rectangular sections. There is a trapezoidal shape that protrudes and ends at the lower corner end of the middle rectangular section. A white strap is attached to the rear section of the helmet. It has teeth and a flat section. Temple section on each side is black and protrudes from the dome. There is a white collar around the bottom of the helmet that hides the wearer’s head. 3D printed armor can not contain visible print lines and must be sanded smooth for a realistic finish. OPTIONAL Level two certification (if applicable): Protruding ear section is visibly a separate piece. Clip greeblies and strap are visibly separate pieces. Aerators and diamond greeblie are visibly separate pieces. The collar has vent with oblong holes on the rear section. Balaclava A black balaclava must be fitted to the wearer, and extend from the base of the neck to conceal the entire neck chin and ears. No hair or skin should be visible around these areas. Flight Suit Flight suit is a medium gray, may have a tint of brown and is made of cotton/cotton-blend, plain-weave material. Alternatively, it can be made of a stretch fabric for the lower pants. Top stitching is same color as material. One or two-piece in construction, but joining of top and bottom must not be visible when all costume components are attached. Flight suit top shows no closure method when worn. A panel must cover the front zipper if present. Flight suit top as a mandarin style collar. Flight Suit has double sleeves: long sleeves with short sleeves layered on top. Short sleeves have horizontal quilted ribs. Long sleeves have horizontal quilted ribs visible between the short sleeves and the gauntlets. Flight Suit does not have any visible pockets, zippers or logos when all costume components are attached. OPTIONAL Level two certification (if applicable): Flight suit is one-piece construction. Chest Plate The chest armor is white and comprises of 4 distinct sections. The lower section. The upper section. The left and right winglets. The lower section extends down to overlap the abdomen armor and is attached to the upper section. It also extends to the rear under the arm pit, joining to the back section with a minimal vertical seam on each side. There is a recessed medium grey section in the center of the lower section matching the medium grey color of the rest of the armor. A white raised rectangular shape with bevels is present in the middle of the grey recess. A dark red oblong shape is present on the left side of the lower section A raised rectangular shape containing the ranking of the commando is present on the left side of the lower section and has the following characteristics. A raised white contour A medium grey ranking rectangle that matches the medium grey color of the armor, inside the white raised contour. On the grey ranking rectangle, is present from top to bottom: A white rectangle 4 squares evenly spaced horizontally on a single row with these colors from left to right: black, dark red, light grey, dark grey. 2 rectangles each having two circular shapes on them. The left rectangle has 2 large white circular shapes, the right rectangle has two smaller black circular shapes. Under the ranking box is a red rectangle. The upper section is a single piece with no visible seam and extend from the lower section to the back section. There is V-shape in the front center of the upper section, on which is attached a raised v-shape white box. On each side of the upper section are attached two raised shapes that gives the appearance of jetpack straps. Over the wearer’s right jetpack strap is a rounded shape box. There is a medium grey grid at the front of the box that closely match the color of the rest of the medium grey of the armor. The left and right winglets are white and symmetrical. They are attached on each side of the upper section at the shoulder area. 3D printed armor can not contain visible print lines and must be sanded smooth for a realistic finish. OPTIONAL Level two certification (if applicable): The 4 sections (lower section, upper section and 2 winglets) and shoulder box are visibly separate parts The ranking box components have thickness and are visibly separate parts. The raised box over the right shoulder is visibly a separate part and has two semi-circular recessed line on the outer side and a recessed on the inner side The raised box grid has exactly 5 vertical rectangular grey shapes and is visibly a separate part OPTIONAL Level three certification (if applicable): The red light is functional under the ranking box. Bacplate The back is white and attaches to the upper portion of the chest armor with minimal joint. It also attaches to the lower section of the chest armor under the arm pit forming a minimal vertical joint. The back armor also attaches the jetpack to the armor with a removable mechanism. The backplate extends down approximately to the height of the jetpack reactors tips. 3D printed armor can not contain visible print lines and must be sanded smooth for a realistic finish. OPTIONAL Level two certification (if applicable): The jetpack has 3 attachment points that are visibly separate parts and are metallic finish. The two upper attachment points are circular T-shaped and anchored to the backplate with a circular plate. The lower attachment point to the jetpack is cylindrical with a taper at the tip and is anchored to the backplate with a rectangular plate. Jetpack All grey parts on the jetpack should be medium grey color matching the medium grey of the rest of the armor. The jetpack is removable via 3 anchoring points attached to the back plate. The jetpack has a recess to wrap around the back plate concealing anchoring points when viewed from the side. The Jet pack consists of a main body and two side reactors white in color. The main body is thicker than the side reactors. The main body comprises the following features from top to bottom A black intake with grills matching the outer shape of the main body. Inside the grill is a visible red shape A rectangular grey shape with chamfered top and bottom edges centered on the main body and extending up to the start of the grills. A cavity in which a grey and white plate is placed. Both the and white portions of the plates have two rectangular shapes present. A white exhaust vent grill at the bottom The side reactors are symmetrical and have the following features from top to bottom: An angled top. A large box with tapered top and 4 recessed cavities. 5 vertical cylinders attached atop of the large box. A small rectangular grey shape directly underneath the large box with two recesses, creating 3 sections. 2 small trapezoidal grey stabilizing fins located on the outside of each reactor. Black directional thrusters, recessed into the bottom of the side reactors. 3D printed armor can not contain visible print lines and must be sanded smooth for a realistic finish. OPTIONAL Level two certification (if applicable): All grey and black components are visibly separate parts. The bottom grill is visibly a separate part OPTIONAL Level three certification (if applicable): The top grill has a functional red lighting Bicep Piece Left/Right LEFT The left Bicep piece is white and fixed to the suit without any visible means of attachment. The piece is rectangular and has the following features from top to bottom. A large recessed rectangular shape with dark red color. A raised white square at the lower right of the inside of the red colored rectangle. A raised medium grey box matching the same color as the rest of the armor medium grey. A recessed line. The box has a rectangular recess at the back. Right The right Bicep piece is white and fixed to the suit without any visible means of attachment. The piece is rectangular and has the following features from top to bottom. A large recessed rectangular shape with dark red color. A raised white square at the upper left of the inside of the red colored rectangle. A raised medium grey box matching the same color as the rest of the armor medium grey. A recessed line. The box has a rectangular recess at the back running horizontally. 3D printed armor can not contain visible print lines and must be sanded smooth for a realistic finish. OPTIONAL Level two certification (if applicable): WIP

Troop 133: 6/1/2024 - Hockinson Fun Days parade - Hockinson, WA (300th troop overall)

Ok here's take two. 1. Cleaned up the gum lines so that the grey doesn't touch outside. While I was at it I straitened up the lines 2. Installed larger mic tip mesh 3. I curled the TD at a more level angle but found the clips rode way to high. So I took them off, cut them down about 3'4" and bent them back into shape. Much better now 4. Found a better blaster with RS props. I miss the rubber but this one looks a lot more accurate and feels great to hold Lastly, here's my new changes all suited up: And my new action shot

Update for relaunch Total 16 points, 2 more EIB and you make Master! It sounds like you may have had a part in some basic clearances as well if those can be confirmed you would be able to earn some extra points there also. Jim @gijim - TK-28888 - MTK ANH Stunt - EIB - 2 points Grave Wong @MrGrave - TK-36036 - MTK ANH Stunt - EIB - 2 points Billy Au-Yeung @baysk - TK-71814 - Anovos ANH Stunt - EIB - 2 points Henry NG @Henry Ng - TK-12762 - Anovos ANH Stung - EIB - 2 points Peter Lee @TK28228 - TK-28228 - RS ANH Stunt - EIB - 2 points Galton Ho @Galton - TK-28823 - TM ANH Stunt - EIB - 2 points Tiffany Wong @rabbitiff - TK-92230 - MTK ANH Stunt - EIB - 2 points Gary Ng @TK66124 - TK-66124 - RS ANH Stunt - EIB - 2 points

Update for Relaunch Hi Justin, I have gone through and I will take your word for the extra singles on the 3 confirmed, as bar 1 which is classified they only have one TK so would be their first and so would indeed count. There are three unconfirmed assists on your list, for these to count we will require confirmation. I make your confirmed total 13 points, 16 if the rest are confirmed. Thanks, Chris. Confirmed: Jessie H. @JHowe102 - TK-10272 - Anovos ANH-S TK - EIB #805 - 2pts Max P. @Ninety-Nine - TK-42199 - AM ANH-S TK - Basic Approval, EIB #923 - 3pts Dwight S. @Dsposato0 - TK-62345 - Anovos ANH-S TK - Basic Approval, EIB #1038 - 3pts Michael G. @Gh0stxxiv - TK-11914 - Anovos ANH-S TK - Basic Approval, EIB #1048 - 3pts Scott S. @TattooedStormtrooper - TK-82077 - RS ANH-S TK - EIB #1049 - 2pts Unconfirmed Michael W. @Crow2xs - TK-40473 - Anovos ANH-S TK - Basic Approval Yahir G. @OFFICER_LASKY- TK-10896 - Anovos ANH-S TK - Basic Approval Zachary D. @stormztrooper1 - TK-98752 - MTK ANH-S TK - Basic Approval

Thank you First piece is printed, it feels good and it fits well. Hard to say with just one piece

Welcome Emil, we are looking forward to your progress and an exciting build.

Event: #199 Event Name: Nassau County Games for the Physically Challenged Location: Mitchell Field - Uniondale, NY Date: 5/31/24

Hi Emil! Glad you made it here after all my nagging! So excited for your build!!!

Hello and welcome to the forum, I think you will find the Galactic armory files have been by most so far looking at the other build threads

Greetings from Sweden! First of all i want to apologize for my bad english! I just started Captain Enoch project and i need some help, Im gonna print all of it. I have 2 sets of files, one if from Galactic armory and the other one is from mcflyprint3d. which one is better? I have read somewhere that galactic armory has problems with the correct scale? Thank you!

Amazing read thank you. Any idea why the Bapty version isn't allowed for Centurion if they were used on screen?

Depends on the area, I used E6000 on areas that would need some give, like the shins and forearms and JB weld for a more solid join yoke, abdomen, biceps etc. JB weld can be sanded too which is handing if you've applied too much or used to fill gaps before ABS slurry (or filler paint for some)

I find elastic is great for hard to get areas, gives you some slack when twisting your hand into that position. Some use it as an extra connector but can just be cosmetic, called the "Han" snap, some references

Hello and welcome aboard, there's a big difference in sizes of armor so take that in consideration when researching