Jump to content
simorph

Simes' ANH TK Build

Recommended Posts

Hi there,

 

I've been a Mando Merc since Celebration Europe and I'm delighted to say I'm starting my ANH TK build at last.

 

My dream is to build a kit that has that screen-used look that you see in the opening of ANH.

 

I'm awaiting a big brown box from RWA, with a kit in 2mm ABS and currently researching soft parts.

 

I figured I'd start from the ground up, so I'm looking at boots, and, because of my desire to get an ANH look, would like to start with black boots and paint them up.

 

Looking at this sceen-used prop ref:

 

img9.jpg

 

I'm thinking maybe these will work?

 

They seem to have the same structure, no seam down the front, vertical seam in the middle of the elastic, high at front and back, only difference is a synthetic sole that I sits slightly proud at the back of the boot (although the ones available at TKBOOTS seem to have a sole in this style too)

 

71iyyMfz4QL._UY575_.jpg

 

https://www.amazon.co.uk/Roamers-Unisex-Leather-Jodhpur-Equestrian/dp/B00PI2T4SE

 

If anyone has any better matching UK links, that'd be appreciated.  Thanks!

 

 

 

Share this post


Link to post
Share on other sites

Looks like a good start to me! Also, Head over to our new member section and introduce yourself!

Edited by Commander Gree

Share this post


Link to post
Share on other sites

Hi Simon and welcome to the FISD!  I love the eye for detail. Be sure to check out the CRL for the ANH stunt TK. 

 

If you are going for 501st approval, there are a few details that, although technically seen on screen, may not be approvable.  This might include "heavy" wear of items or on-set fixes such as gaffers tape and such.  Some minor wear and tear is allowed.

 

Good luck on your build!

 

  • Like 1

Share this post


Link to post
Share on other sites

FYI, I found this:  it is an application for Centurion (Level 3) approval .  The trooper is slightly weathered and approved. 

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Boots look fine, just double check they don't have an extra seam on the inside, there are a lot of boots out there that have a stepped seam join, although fine for basic approval it won't allow you to go higher if you aim for EIB or Centurion, can be quite rewarding achieving those levels of build accuracy.

 

 

  • Like 1

Share this post


Link to post
Share on other sites

They appear to...

roamers-u-252a-unisex-leather-gusset-jod

...but then again, so does the screen-used boot...

img7.jpg

And the ones in the CRL...

TK_anh_stunt_boots.jpeg

 

 

 

 

I may be missing something as the CRL  (https://databank.501st.com/databank/Costuming:TK_anh_stunt) as far as I can see only talks about having no seam on the front of the boot for level 2 certification.  Can you point me to the appropriate link as I'm clearly not seeing that?  Thanks

Edited by simorph

Share this post


Link to post
Share on other sites
13 minutes ago, simorph said:

They appear to...

roamers-u-252a-unisex-leather-gusset-jod

I may be missing something as the CRL  (https://databank.501st.com/databank/Costuming:TK_anh_stunt) as far as I can see only talks about having no seam on the front of the boot for level 2 certification.  Can you point me to the appropriate link as I'm clearly not seeing that?  Thanks

In that image the look fine, they are exactly the same as the outside, there are some cheaper boots out there that have a stepped join seam on the inside, they are easier to make that way and won't get higher level approval.

 

 

Share this post


Link to post
Share on other sites

They look great, going to buy a pair for myself - nice find:duim:

  • Like 1

Share this post


Link to post
Share on other sites

Hi Simes,

 

No harm in going the DIY route with your boots - I did the same. However, personally, it took me two orders of white boot dye to get mine white enough, plus the many hours of coat after coat. My boots were also from amazon and around £20-£25. The boot dye was around £10 per go. So, ended up about £45. For about £20 more, RS Propmasters do some beautiful boots that are worth checking out.

(Build link in my signature if you wanted to check it out).

 

Just a thought. :-)

 

Share this post


Link to post
Share on other sites

Thanks Dan - I hadn't thought of RS for boots + other accessories.  Thanks for that suggestion - it'll probably work out just the same price in the end.

Share this post


Link to post
Share on other sites

I have the same boots on order! Not because I'm a masochist but because I couldn't find them small enough in white. I have high hopes for the Angelus paint. (And I'm also looking at the extra authenticity as a nice benefit).

Sent from my SM-G950U using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

So boots arrived - great fit, have Angelus prep solution and white dye, rubber gloves with logos removed (checquered grip on fingertips), undersuit and balaclava from www.extremeracing.co.uk (good fit, no logos, once piece with two-way zip and which I've seen a number of folks' builds here)

 

Hopefully start prepping the boots (wearing them in right now with some shoe stretcher) while I await the big brown box from RWA.

U3nqc4R.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Very nice. If the boots are a little too tight you can stuff with wet newspaper, really jam it in there then leave until they dry, I've done this to a few pairs and gave me just the extra room needed.

 

Looking forward to the progress on your boots, good luck.

Share this post


Link to post
Share on other sites

Thanks.  Actually it turns out they're a little more roomy than I needed.  But to make sure there's no pinching I've spent about 3 days wearing them about the house with a bit of shoe stretching spray and they're wearing in nicely. I figure I'll stretch them into shape first, and once the leathers been through its paces, softened up and found its natural crease lines, then do the dyeing. ( I may get a couple of cushioned insoles because I know what it's like to troop for a day straight as a Mando.)

 

And great news, this afternoon, Ross from RWA dropped me a line - I have a Big Brown Box on its way this week!  Time to start watching those assembly videos!

 

Have a great week, guys!

Share this post


Link to post
Share on other sites

Great news, looking forward to seeing those BBB's soon.

  • Like 1

Share this post


Link to post
Share on other sites
Scratches head and fires up YouTube...
NTJDqZH.jpg&key=bbd1bee5600c8f60336d1cc53d810cf0dd8c276b1f781496f480ea94a3a4e80b

Whoop!!

Ross’ videos are superb. You’ll do fine with those. (Don’t forget to listen out for the snoring dog )
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×