stuartm343 Posted October 18, 2018 Report Posted October 18, 2018 (edited) Name: Stuart Mckay ID: 11071 FISD: Stuartm343 Garrison: UKG Armour: RWA Belt: RWA Holster RWA Boots: made Weapons: Procoprint3d Strapping Kit: RWA Under suit : under armour Gloves: Imperial war fighters Neckseal: Extreme Racing Electronics: TRamp Edited October 18, 2018 by stuartm343 added more pics
gmrhodes13[Staff] Posted October 18, 2018 Report Posted October 18, 2018 Nice work trooper, have you thought of using some tighter elastic in the sides of the ab/kidney to close the gaps. A couple of your cover strips appear a little long, shouldnt really be longer than the armor, they can catch when moving. You seem to be missing the black elastic which is attached to the bottom sides of the shoulder bells. You will need to provide a few images of your blaster, sides and D ring. Also close up of your TD screws, bit hard to make out if they are pan heads. Good luck
stuartm343 Posted October 20, 2018 Author Report Posted October 20, 2018 On 10/19/2018 at 12:56 AM, gmrhodes13 said: Nice work trooper, have you thought of using some tighter elastic in the sides of the ab/kidney to close the gaps. A couple of your cover strips appear a little long, shouldnt really be longer than the armor, they can catch when moving. You seem to be missing the black elastic which is attached to the bottom sides of the shoulder bells. You will need to provide a few images of your blaster, sides and D ring. Also close up of your TD screws, bit hard to make out if they are pan heads. Good luck Thank you, I may have to get a larger kidney plate if I go tighter I'm worried they will pop off during a troop, I will give it a go though..I'm out trooping today with it so I will see how it goes :) More pics: elastic inside bell, trimmed edges & blaster 1
gmrhodes13[Staff] Posted October 20, 2018 Report Posted October 20, 2018 9 hours ago, stuartm343 said: You will find the elastic is glued closer to the ends and almost at the bottom edge of the bells 1
CableGuy[TK] Posted October 20, 2018 Report Posted October 20, 2018 Hi Stuart,Looking good. If you want some tips on the shoulder bell elastic, here’s our armour maker himself;Also, your magazine appears to be inserted backwards in your e-11. Best of luck with clearance. Dan 1
gmrhodes13[Staff] Posted October 20, 2018 Report Posted October 20, 2018 9 hours ago, stuartm343 said: 1
stuartm343 Posted October 20, 2018 Author Report Posted October 20, 2018 Errr.. well spotted, note to self.. Less haste Sent from my G3311 using Tapatalk 1
justjoseph63[Staff] Posted October 21, 2018 Report Posted October 21, 2018 Nice job. Stuart! One of us will be with you shortly, brother, but in the meantime could you post up 2 pics for us? One of the exterior of the cod snap and a close-up of the ab-button plates. (At least you don't have to get suited up for these)! Thanks!! 1
stuartm343 Posted October 21, 2018 Author Report Posted October 21, 2018 (edited) 10 hours ago, justjoseph63 said: Nice job. Stuart! One of us will be with you shortly, brother, but in the meantime could you post up 2 pics for us? One of the exterior of the cod snap and a close-up of the ab-button plates. (At least you don't have to get suited up for these)! Thanks!! No problem Edited October 21, 2018 by stuartm343
CableGuy[TK] Posted October 25, 2018 Report Posted October 25, 2018 Hi Stuart, Nearly there. Could you please post clear photos of your sniper knee from left, right and front. We can't quite see the alignment from the images provided so far. Also, to complete the EIB photo check list (EIB Checklist), could we please have the following photos: Left side - arms down Right side - arms down Holster attachment (showing fixings to canvas belt) Neck seal Boots (all angles) Thigh ammo pack - left side, right side, internal fixings Many thanks in advance, Dan 1
stuartm343 Posted October 25, 2018 Author Report Posted October 25, 2018 I'm trooping this Sunday (first TK troop) so I will get some pics done in kit and post them 1
CableGuy[TK] Posted October 28, 2018 Report Posted October 28, 2018 I'm trooping this Sunday (first TK troop) so I will get some pics done in kit and post them Super - thanks, Stuart. :-)Have a great troop. 1
stuartm343 Posted November 11, 2018 Author Report Posted November 11, 2018 (edited) Sorry for the delay in getting these posted I've been trooping as the Emperor lately, 2nd troop today as TK so I managed to get the side shots The chest armour is protruding as I've got the TRamp unit under there Edited November 11, 2018 by stuartm343 added more pics
CableGuy[TK] Posted November 11, 2018 Report Posted November 11, 2018 Hi Stuart, Looking great. :-)Sadly, we are unable to process EIB or Centurion applications with any kind of decal, including the UKG shoulder bell decal. If we could kindly ask for arms down pictures without the decal, we’ll be good to go with your app. Thanks in advance,Dan 1
stuartm343 Posted November 11, 2018 Author Report Posted November 11, 2018 No problem, will get some up shortly :) 1
stuartm343 Posted November 11, 2018 Author Report Posted November 11, 2018 No problem, will get some up shortly Can it be covered or does it have to be removed? Sent from my G3311 using Tapatalk
CableGuy[TK] Posted November 12, 2018 Report Posted November 12, 2018 17 hours ago, stuartm343 said: Can it be covered or does it have to be removed? Sent from my G3311 using Tapatalk Hi Stuart, I'm afraid it would have to be (carefully) removed for EIB and Centurion applications. Thanks in advance. Dan 1
stuartm343 Posted July 24, 2019 Author Report Posted July 24, 2019 Hi Dan, Sorry this has taken soo long to complete I had an opportunity yesterday for a photoshoot so I jumped on it with my TK , Decal removed
stuartm343 Posted July 24, 2019 Author Report Posted July 24, 2019 (edited) Edited July 26, 2019 by stuartm343
TKSpartan[Staff] Posted July 24, 2019 Report Posted July 24, 2019 Nice Pictures! Good Luck Trooper!! 1
TheSwede[TK] Posted July 25, 2019 Report Posted July 25, 2019 Hi Stuart and welcome back. I would like you to update the first post with all the required photos and remove those that shouldn´t be reviewed, that would make this process alot smoother - thanks 1
stuartm343 Posted July 29, 2019 Author Report Posted July 29, 2019 On 7/25/2019 at 6:47 PM, TheSwede said: Hi Stuart and welcome back. I would like you to update the first post with all the required photos and remove those that shouldn´t be reviewed, that would make this process alot smoother - thanks Hi Daniel, Just to be clear you are wanting me to remove the photoshoot pics and leave the clearance pics (without the decal) as requested by Dan?
Recommended Posts