Haribon72[TK] Posted October 26, 2015 Author Report Share Posted October 26, 2015 (edited) We are going to start the ammo pack on the outside thigh first. This will serve as our holder so that we can get a clean install on the other side (inside thigh). I'm using a wooden awl to start the rivet into the thigh. Then I use a rivet punch to finish it in. Edited October 26, 2015 by Haribon72 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 26, 2015 Author Report Share Posted October 26, 2015 Done. When one side of the ammo pack is fasten, wrap the ammo pack around the thigh and install the other side (inside thigh). This makes the installation easier. Here are pics of the "almost finished look". 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 26, 2015 Author Report Share Posted October 26, 2015 (edited) The Inside Box to the Ammo Pack Here's the method and use of the inside box. Notice there's a gap between the ammo pack and the thigh. Heat it up and throw any monster clamp you have into the area. The clamp will work into the soften area and push thigh armor towards the ammo pack (and inside box). Let it cool down for ten minutes and drill a small pilot hole for a machine screw to hold the ammo pack. Your ammo pack will not go anywhere. I don't recommend using a rivet. The two existing rivets will hold the pack together. Okay... at this point I don't have anymore pictures from our past sessions. We are about 85% done with Bingo's TK. Hopefully, we can cross the finish line before Halloween night. Edited October 27, 2015 by Haribon72 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted October 26, 2015 Report Share Posted October 26, 2015 That has the be the sturdiest ammo pack I seen so far. That sucka isn't going anywhere lol 3 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 27, 2015 Author Report Share Posted October 27, 2015 That has the be the sturdiest ammo pack I seen so far. That sucka isn't going anywhere lol Thank you Tony! I will call this the ammo pack " Pill Box " method! 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 27, 2015 Author Report Share Posted October 27, 2015 (edited) ESB Helmet Discussion. Should I buy ESB decals? Can I use the ANH decals that came with the kit? Should I color match and paint the details? All great questions. We did some reading (on the internet) and watched a few scenes from Empire Strikes Back. We're going to use the ANH decals that came with the NE kit. Here are the findings. Special thanks to our friends at http://www.starwarshelmets.com/ Note: Please disregard the current black frown. Bingo will be updating it. Edited October 27, 2015 by Haribon72 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 27, 2015 Author Report Share Posted October 27, 2015 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 27, 2015 Author Report Share Posted October 27, 2015 (edited) We also watched the YouTube video for this discovery. Again, special thank you to StarWarsHelmets.com I have an idea for the blue stripes for the cheeks. We'll continue again later in the week. Edited October 27, 2015 by Haribon72 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted October 27, 2015 Report Share Posted October 27, 2015 I comment you guys for going screen accurate, is there a reason for it other than just wanting to be screen accurate? 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted October 27, 2015 Author Report Share Posted October 27, 2015 (edited) Good question Tony! We noticed that there wasn't many ESB builds going for EIB and Centurion. Bingo wanted to get his build to the high ranks. This is our first time working on ESB and seemed like a common goal for Bingo and I. The ESB helmet is growing on me because of the black frown.Maybe next year I'll build an ESB costume for me. Edited October 28, 2015 by Haribon72 2 Quote Link to comment Share on other sites More sharing options...
The5thHorseman[TK] Posted October 27, 2015 Report Share Posted October 27, 2015 I would really go with proper decals if I were to do an ESB helmet as the grey is different from ANH. It is a much more blueish/colder grey. You can PM FISD member Verne for them. He's selling a very good set of ESB decals. http://www.whitearmor.net/forum/user/8340-verne/ 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted November 4, 2015 Report Share Posted November 4, 2015 Looking good Walter. Hey you going to troop with us this weekend, KY and few others will be there? 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 4, 2015 Author Report Share Posted November 4, 2015 Hi Tony! I will be in South bay for another troop that same day. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted November 4, 2015 Report Share Posted November 4, 2015 Hi Tony! I will be in South bay for another troop that same day. No prob, have fun 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 ESB Decal Hack Here's a hack worth checking out. Re-purpose the "Sandtrooper" decals that came with the NE kit. Use the black edges of the throw away portion of the decal. Re-read the CRL and it says . . . Traps/tears and tube stripes shall be decals (with the correct ESB details), no hand-painting or decals that replicate hand painted. Traps/tears may be either ANH grey or a slightly bluer shade of ANH grey. Mark the decal with a pencil to guide our stripe placements. Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 ESB Blue Stripes Hack I had some large white tape from an old industrial label maker. We carefully placed the blue stripes on top of the white tape and then installed it onto the helmet. Looks legit to me. You can also use a large white bumper sticker ( from the Dollar Store ). Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 Here's the hack . . . Cut a piece of blue tape to a pencil's width and length. Install it where the curve begins on the helmet. White label tape or white bumper sticker Place blue stripes onto the white tape. Cut out your new ESB decal with an Exacto knife and place it onto the helmet (centering, double check for accuracy, etc...etc.. ) Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 (edited) 1. Don't peel off the top wax paper yet! 2. Use your nail to rub the blue stripes onto the helmet (with the wax paper on top). 3. Then slowly peel back the wax paper. 4. Enjoy your new hack! Edited November 9, 2015 by Haribon72 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 Continue on with the back black stripes for the helmet. Take your time slicing the black stripes and removing the unwanted slices. Re-Purpose and Recycle! Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 9, 2015 Author Report Share Posted November 9, 2015 To be continued . . . Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted November 10, 2015 Report Share Posted November 10, 2015 haha awesome! 1 Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 10, 2015 Author Report Share Posted November 10, 2015 Thanks Tony! Quote Link to comment Share on other sites More sharing options...
Superbee[TK] Posted November 10, 2015 Report Share Posted November 10, 2015 I was under the impression that ESB has 13 blue stripes not 16 ? Quote Link to comment Share on other sites More sharing options...
Haribon72[TK] Posted November 10, 2015 Author Report Share Posted November 10, 2015 Hello Micheal....CRL states . . . <br><br> "Tube stripes are medium blue, should be 13 per side, but can be 9 and 16 per side with the curve bends extending backwards." Quote Link to comment Share on other sites More sharing options...
Superbee[TK] Posted November 10, 2015 Report Share Posted November 10, 2015 Thanks Walter for the clarification, I'm at that point now where I'm trying to finish up the helmet and this really helps me clarify what is correct and what is incorrect just trying to shoot for the stars . thank you <br> P.s . By the way your team build is looking awesome ! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.