Jump to content

FBJ's ANH Hero Build [TM]


Recommended Posts

 

I am sitting here at fbj towers with a coffee and a selection of custard creams and am the master of all I survey; my recently semi finished TM armour spread all over the room. I glued the last right kidney elastic in this morning and decided my first plan of natural weathering will do the trick on this fine set of 1.5mm gloss abs plastic. So I have given it a quick clean over with some wet wipes and a little rub with a micro fibre cloth to remove any pencil marks and other general grubbiness and now I am done.

 

I still have plenty to do, I need to build my hero helmet, I have latex hand plates to paint and glue to gloves, I have to replace the thermal detonator clips with my alu strips included in the Big Brown Box. I have an RS Props stunt lid that needs attention, I need to rivet my holster on for clearance Clarence and I need to have a shave.

 

I also need the use of a cameraman or woman to take lots of pics so that I can show you fine people what I have built, any takers? I m free today or tomorrow?

 

In the meantime I can confirm that the one size fits nobody accurate armour assembly fits this eager stormtrooper and I cannot wait to get some pics done..

  • Like 3
Link to comment
Share on other sites

 

And the leather holster is now permanently riveted to the belt. Hopefully get some pics uploaded later today :-)

Edited by firebladejedi
  • Like 1
Link to comment
Share on other sites

 

 

 

Just a few pictures of my RS Props ANH stunt helmet. Not much to say about this as I bought it as is, I guess it was built and decorated by the guys at RS. If I did one thing to this it would be repaint the vocoder as I do not like the matt black paint.

 

d38d79b4-7197-49be-8952-b077e3b275fd.jpg

ce5e2f77-291b-4829-b37e-49bad4b5c102.jpg

cb5ee531-5aa1-41ee-9176-faba9cc28844.jpg

9e32eb3a-611c-4292-babf-284d467a9720.jpg

2f674d6b-1818-464d-aca3-877257f6695c.jpg

c4e70fc7-aeb1-4f2e-9984-5def4e591e25.jpg

photo%205%2029.jpg

d38d79b4-7197-49be-8952-b077e3b275fd.jpg

1de0acfd-55e7-443b-9adb-c717b31b216e.jpg

 

As you can come to expect from any self respecting peas, the helmet is finished in keeping with the original costume pieces. All hand painted details and the interior in complemented with star shaped foam liner and elastic chin strap and flimsy green acetate lens. Until my TM hero helmet is made this will do very nicely indeed.

  • Like 1
Link to comment
Share on other sites

Guys at RS have done a fine job with this helmet. And I love how the brow sits. Only low brows right above the eyes for stunt helmets is getting really boring lately.

Edited by The5thHorseman
Link to comment
Share on other sites

Thanks Paul, it means a lot. I still have plenty to do and may need to do some tweaks now that I have finally suited up..

 

What's that? You don't believe its fbj inside the armour there. Ok here we are lids off pictures.. sorry about the poor quality pictures in advance

 

 

DSCF7466%205.jpg

  • Like 3
Link to comment
Share on other sites

This is phenomenal.  This was what I needed to get back into my own build.  I am at the strapping and snapping phase.  Having trouble engaging these past few months.  Got my DD kit with mod pack and that's at a standstill as well.  Hope to start posting critique pics soon and get back in the saddle.  Thanks for an awesome build.

Link to comment
Share on other sites

Hey I'm far from done with this build so be sure to stop by soon for more updates. <br><br>

I'm glad to hear that it has enspired you to get cracking again with your build - get those pics up so we can see what your upto :-)

Link to comment
Share on other sites

 

In the interim period before I start work on building my Hero helmet, which I have pencilled in for Wednesday this week when going through the transitional period from earlies to nights.. I thought I would post up a few pics showing my boots and gloves that I used for my stunt ANH trooper..

 

First up the boots. Just like any of the other various peas I went down the route of getting come fine English leather boots and painted them white. Its a good look that's been around since 1977..

 

701.jpg

703.jpg

 

ref pictures

 

309_1.jpg

164_2.jpg

 

And the gloves. These are natural latex painted white and glued to rubber gloves. I think mine need to start using Head and Shoulders as they are getting a little flaky..

 

739.jpg

741.jpg

 

Promo trooper says get some latex handplates..

 

594b1fc4-50e8-4495-bedf-96a755460001.jpg

  • Like 2
Link to comment
Share on other sites

Ok so after putting the fireblade back into firebladejedi at the weekend and for those who have not seen it here it is.. its back on with my build.

 

IMG_0308.jpg

 

Ok so as its a bank holiday today in the uk my ninja class has been moved to tomorrow and I was going to be having a sci fi night with a mate who has Trigeminal neuralgia and as he suffers quite badly he was not feeling up to it and cancelled, so I started on my hero helmet build.

 

I have trimmed the eyes and teeth and will do a little more work on Wednesday as planned. Updates with pictures soon I promise..

Link to comment
Share on other sites

 

Ok so what are we on now, day 20?

 

So I wanted to trim my eyes on the hero lid like the efx lid, but that was not turning out as I wanted to I just opened them up fully like this..

 

photo%202%2077.jpg

 

This afternoon I have been painting the black outlines in the taps as I ordered some magnets to help me position the faceplate and back and cap. I always think you need 4 hands to be able to assemble a helmet nicely.. so not to waste any time in finishing this bad boy, er sorry hero off, I got started on the paint.

 

I also touched up the side rivets in my torso by spraying some paint into a plastic container and brushing it on.

 

e43d1cce-f962-416d-8be5-3cfd28105cc5.jpg

 

To be continued...

  • Like 1
Link to comment
Share on other sites

 

 

Ok so my Stormtrooper ANH stunt has been cleared by the young My Haggis and there was 1 advisory that needs attention and alas I am away on holiday so there will not be any further updates for a while. I will get on with my hero build as soon as I get back.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...
  • 2 months later...

Well I bought the TM, Paul's been great through the ordering process. He's a mountain of information. My Hero TK kit was shipped this week. I'll start a build thread once the BBB arrives.

Link to comment
Share on other sites

I have loved reading all about what you've been eating.  It has been quite the culinary journey!

Oh, and the build is pretty good, too.  ;)

Seriously, I have bookmarked your build and will be using it when my armor finally arrives.  This post is fab!  The info here is going to be more than useful.  Thank you for taking the time to share with us!

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...