DudeSidious

and the Belt does'nt seem to be on properly.Awsome though, you look like a Stormtrooper.

With the standerd size joining strip you will see the lap join molding.What size cover strip do I use?

Are the trooper bay mic tips & mesh screen accurate?

You should'nt touch the ears untill you put the helmet together.heres a good Tutorial on building you lid. http://forum.whitear...et&fromsearch=1

Glueing the left shin. I found it a good idea to put tape under the magnets as they do mark the ABS.

With the sping you should be able to stretch it out a bit.

off to a good start but whats happend to your hand? can you wiggle your fingers?

Thighs done just need tidying up a bit. same with my DVD's.

How much weight did you lose ?Its made a big differance.You look great!

Ive got same problem but in my case I brought crappy snaps. The one on the left is what Ive got on my armor the right is what I should of used but didnt know any better. Some how I have to change them all.

the bit you cut off maybe you could try and glue back on and with a bit of filler you could get by.

Joining my right thigh.I hope the left one is not such a slave Leia. Applying downward pressure

oh.. did you know most peaople here where thongs... especially when its hot.

.I got my canvas from an art supply shop

One arm done.

Thanks for all your help.I ended up having to use 22mm strips.

One arm just about done.Glueing on studs and plastic strips to hold on to the elastic strap for the shoulder.

Ive trimed just about as much as I can and at this point can squeze my hand through. I have take'n less off the back side and think it will look strange with the 15mm cover strips. to give you an idea what im looking at the green tape 24mm. Any ideas? even 15mm will look funny on th above pic

Im on to the forearms and having trouble.Ive roughly taped two sides together for a test fit and my hand does not go through.Can I clamshell these or space them apart more incressing the width of the joining strip? A pic of the small end.I know there is no return edge at the small end. does that include the bit near the dimples?

Ive cut out the shoulders and now onto the biceps.Im butt joining my armor.I know the AP is made so you can lap join but I want to be a bit more screen accurate. definitely a harder route but I think its worth it.

Thanks guys.It does fit nice I can even do star jumps ...stoped at ten

I increased the length of the shoulder straps to lower the back plate and It does seam to sit down better on my shoulders now. Let me know what you think.

Test fit of the torso.I just need to add some shims at the sides and im thinking of trimming the return edge of the mid back plate just a bit as it realy sticks into my back. Not sure about the gap I have here between the back plates.

So if i just buy the original triolgy on blu ray and not the whole saga. Will I miss out on any of the bonus stuff from the original triolgy?