DudeSidious

Back of torso assembled.

More snaps plus Ive added a return edge to the butt plate where it was cut from the back plate. Im thinking that i wont need to do this to the back plate as it will be covered by the belt?

Im thinking maybe should I have used double snaps at the shoulders.

more clamps, pack of 18 from bunnings for $10.

Ive cut out and sanded the torso and have made the snap plates. I'vd used rivits with a washer for extra strength insted of the back of the snap. I need to buy more clamps as can only glue one at a time this way.

Im just about done with the helmet just goto paint the screws.Im happy with the way its turned out. I found the ears easy enough to paint.Later on I think Ill take off the decals and paint those bits too.

I don't see how.I think the AP tube decals are Identical arnt they?When I put mine on everthing was marked left or right except for the tube stripes.

Ive just noticed ive started this thread in the wrong forum.Can some one move it to ANH build threads?

I've put on all of the decals and just have to paint the ears and chin. I've reduced the flare in the right eye by just adding pressure with my fingers.

I've trimed the eyes some more and gave the frown its 1st coat.

yeah still had to trim about 10mm. mainly because of my big head I think.

Today it took me all freaking day to finnish both ears and do a slight adjustment to the cap and the face plate.Over all I'm happy with the results.As you can see I gained a bit more space between the ducts and the ears and gained at lower jaw line to.But doing this has lowerd the brow.The good news is now I can get my head in without ripping my ears off.

I think i will repoistion the face plate.wich sux, cause it took me a log time to do that ear.

I put it on side ways then turn it.

did you have to trim the neck line?Its a tight fit.

ok I drilled the marked holes with the brow in place and it does fit better. but now ive noticed the ear maybe to close to the tear and the bottom law line maybe to short. what do think?

OK I'll try that

Im not to sure about the eyes ,Im going to research the abit more before I trim any more. Question time. The hole marks on the two halfs of the helmet.Do you drill these or mark your own? Because when i have the premarked holes lined up the brow is very low.Or do I cut the brow to fit?

Test fit. Now to cut and fit the ears.

Hi all, After an impatient wait two out of three box's of white bits turned up today.Helmet in one arms and legs in the other. Im starting with the lid though i have cut out one of the thighs already.Im using the score and snap method no dremal not yet anyways.Heres where im at. I've painted the inside with matt black fiddly bits. This is my 1st AP build.Your advice is most welcome.

it posted here a while back. http://forum.whitearmor.net/index.php?showtopic=15846

ok thanks guys.

Great looking baster rick. You have covered all the holes on the top center.Does your scope mount share that hole?

Hi, I'm working on a pipe build E11 and I'm not to sure on the exact placement the the t tracks. for example does the top track share the same hole as the scope rail? does someone have a diagram or something i can follow?