jsilvius

Hey @TKModder421, I resent the DM and shot you an email on your FISD listed email address.

hmmm... I'll resend it.

Forearms and biceps rough trimmed and taped so we can size, then glue. Sent from my SM-N981U1 using Tapatalk

Doing some forearm trimming on a rainy Sunday. Next step is to get them sized and then move on to the biceps. Sent from my SM-N981U1 using Tapatalk

@TKModder421 pm sent. Sent from my SM-N981U1 using Tapatalk

So I started to watch the 850 AW build videos to get an idea of how different this build will be from an OTTK and I discovered that I'm missing some pieces. First off, I'm missing the TD mounting block (cheers to @gmrhodes13 for providing me a few 3d printed options to try). And secondly, I seem to be missing the 37" ABS strip for the belt. So it is time to source a few parts. I'm hoping to at least start building arms and legs this weekend as they seem pretty much the same accept the build video showed it done as overlapping joints instead of butt joints. So I'll need to check some other build threads and the Crl to verify some build techniques. Sent from my SM-N981U1 using Tapatalk

Add me to the list. This build is not for me, but my wife, be she isn't on the forum, so here is my info Forum ID: jsilvius TK ID# 12953 Date Started: 4/14/2024 Date approved: WIP Location: Virginia Variant: TK 501st Approved: Not Yet EIB: not yet Centurion: not yet Armor brand: 850 AW Helmet brand: Nico's 3D Print WIP Thread:

Well, here we go. Looks like it is all here. There are a couple of pieces that I don't have a clue what they are, so I'm hoping that some of the build threads will be able to help me figure it out. But the first step is lots of flashing removal. Sent from my SM-N981U1 using Tapatalk

Thanks Mike! I'll take a look at your thread, I need some inspiration. I've got most of Nico's helmet printed as well. Sent from my SM-N981U1 using Tapatalk

We figure we will have to cut the ab down some for this as well, so we'll fit it to her sitting and when adjust as needed for when she stands for pictures. We are excited to see how this goes. Sent from my SM-N981U1 using Tapatalk

Greeting all! I'm about to start down this road. I was gifted a 850 armor works R1TK, minus the helmet. My son and I are planning to build it for my Wife (DS-32076), she currently only has a Mara Jade that she wears, but she is jealous of al the attention that Jarod and I get, so she wants to be a TK too! With her disabilities, our local Garrison Armor and GML both suggested the R1 style might be better for her as it maybe a bit easier to customize for her conditions. We plan to build it standard, but we will be setting it to have the cod and butt plate be strapped for easy removal as she often has to use a powerchair for larger events and needs a walker otherwise. We may need to cut the thighs and shins for easier sitting, and we'll see what other changes we need to make post build. This will be the build thread. Let's see how it goes.

Troop 39. Big Lick ComicCon NoVA Sent from my SM-N981U1 using Tapatalk

No offense, but yikes.... The more you know, I guess.....

I was so into my new build, trying to get it done before our last big event, now I'm eh, I'll get to it eventually. Guess that's the problem with having a working kit already. Sent from my SM-N981U1 using Tapatalk

Congratulations! I've been doing this for 4 years now and it is just as exciting as day 1! Good luck with your event! Can't wait to see pictures!

You've taken your first step into a larger world! Welcome to FISD. I can tell you as a non-handyman, you've already got one up on me and I do okay. Shooting for Centurion off the bat is a great way to start. It can be tough, but rewarding. As @gmrhodes13 has already pointed out, there are lots of resources and friendly faces around to help. So hope on in, take a look at some build resources, look at some of the build threads (you can check my two out in the links below my signature), and jump in with both feet. We'll be here to assist with any questions you might have! Best of luck and we look forward to seeing your build page!

Just wait for @MaskedVengeance to verify.

Donated Sent from my SM-N981U1 using Tapatalk

Troop 36, 37 and 38 GalaxyCon Richmond all three days were full. Sunday I wore my TK for 8 hrs. Friday we were honor guard for the Emperor's Q&A. Saturday we met Bo, Moff Gideon, The Armorer and Captain Carson Teva. Sunday was meeting Cara Dune, young Boba, the Emperor himself, and the voice actors from Clone Wars, Obi Wan, Skyguy, and Snips.

I'm really excited about seeing how this comes out. That wrap on the glove looks like something you could create with a 2nd set of the gloves and just cut the patter out and sew it on. I think I read you have someone making you the kama, so they might be able to do that as well. Unfortunately anyone that has access to these files would be breaking their agreement with GA if they shared them, so not sure you will get a response in public forum about sharing paid for files. My guess is that Aaron only sells them as a set. The whole set is on sale for $30 currently. https://galacticarmory.net/collections/armor-3d-files/products/captain-enoch-armor-3d-print-files If you alright bought the helmet, you might ask him if you can upgrade to the full set and pay the difference. I've seen some vendors allow that.

Okay @gmrhodes13 and @Doggydoc, how do these look? Sent from my SM-N981U1 using Tapatalk

Thank you both. I'll work on cutting those down. Sent from my SM-N981U1 using Tapatalk

While I await the arrival of the new earcaps, I decided I would work on my belts. Yes, I said belts. My goal is to have an EI ANH Stunt and an ESB. So swap out helmet, belt, hand guards... two kits. I followed Tony's guild and cut the 45s and I'm looking at punching holes. Just curious about the belt squares. I'm not sure if I need to cut this down (thickness) or is the little depth okay. Sent from my SM-N981U1 using Tapatalk

Congratulation Chris. I'm sure you will do an amazing job, and having @Sly11 as XO will only make things easier for you. I look forward to working with you this term.